• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.8
• /
• pp.1021-1027
• /
• 2013

In this study, a prognostic technique for cavitation erosion that is applicable to centrifugal pumps is devised. To estimate the erosion states of pumps, damage rates are calculated based on cavitation noise measurements. The accumulated damage is predicted by using Miner's rule and the estimated damage undergone when coping with particular operating conditions. The remaining useful life (RUL) of the pump impellers is estimated according to the accumulated damage prediction and based on the assumption of future operating conditions. A Monte Carlo simulation is applied to obtain a prognostic uncertainty. The comparison of the prediction and the test results demonstrates that the developed method can be applied to predict cavitation erosion states and RUL estimates.

• Journal of Korean Institute of Industrial Engineers
• /
• v.42 no.1
• /
• pp.73-79
• /
• 2016

The purpose of this study is to understand human sensory and emotional response according to car noise. This study investigated human stress levels from car noise based on the data of electro-encephalogram (EEG) and subjective evaluation analysis data. Since there are few previous works on the effect of car noise on human's reaction, more profound research about the effect of car noise on driver's emotion would be worth performing. Subjects were exposed to five different kinds of car noises. EEG data were collected while the subject was exposed to noise. In order to process EEG data, FFT analysis was used to separate the collected EEG data into ${\alpha}$-wave and ${\beta}$-wave. Also, survey was performed to carry out subjective evaluation. The results of the subjective evaluation were closely correlated to those found in the EEG signal analysis. The results from this study may provide useful information for mitigating car noise induced stress.

• Explosives and Blasting
• /
• v.19 no.3
• /
• pp.91-104
• /
• 2001

As in Korean environments with mountainous and hilly areas, the rock generally has to be removed in construction or civil engineering work in tunnelling or excavation for development in urban area. Explosives should be used for blasting, which may cause serious problems on local people for their claim for compensation due to ground vibration, noise. For safe and economic blasting, geology and engineering characteristics of rocks such as discontinuities of rock or weathering are very important factors, together with site characteristics for prediction of ground vibration. In this study, conducted were the detailed study for major rocks most widely distributed in the South-east area, in-situ geological survey, geological and geochemical analysis, and further laboratory uniaxial rock stress, seismic velocity of core samples together with in-situ seismic velocity measurements. Regulations on ground vibration and noise were reviewed for assessing their adaptabilities, and a total of 4,856 measured blasting vibration data were examined for enhancing the confidence level in estimating the predictive formulation using scaled distance statistically.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1125-1126
• /
• 2011

고온 초전도 전력기기는 상전도 전력기기에 비해, 중량과 부피가 작고 전력손실이 거의 없어 효율이 높고 대용량기기에 많은 장점을 지니고 있으며 또한 환경 친화적이다. 대형화가 요구되는 선박추진용 모터를 초전도 모터로 사용할 경우 저속 및 고 토크의 모터를 제작할 수 있고, 계자 권선과 전기자 권선을 초전도 선재로 사용함으로써 높은 전류밀도와 고 자장이 가능하여 고효율 및 소형 경량화 등의 장점이 있다. 그러나 전초전도 모터의 경우 얇은 테이프 형태의 초전도 선재의 특성으로 인해 구리선처럼 가공이 힘들고, 선재를 초전도 상태로 만들기 위한 냉각이 필요하다. 이러한 문제점을 해결하기 위하여 본 연구에서는 동기모터와 선형모터를 혼합하여 고정자에 위치한 racetrack type의 전기자 권선뿐만아니라 회전자에 자기장을 발생시키는 계자 권선도 회전자가 아니라 고정자부분에 위치하므로 구조상 견고하고 냉각등에 장점이 있는 호모폴라 모터를 제안하였으며 자기저항의 변화가 작은 구조로 토크 리플이 작으므로 소음과 진동이 적은 모터를 설계하였다. 설계 결과로부터 호모폴라 모터를 제작하였으며 레이스트렉형과 팬케이크 권선의 임계전류등을 측정하였다. 추후 호모폴라 모터의 성능시험을 진행할 예정이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3633-3640
• /
• 2010

For a development of non-contact magnet gear which is magnetized as a helical shape, a method of 3-dimensional FEM analysis is used. An elementary technique required for magnetic property analysis and parts design about magnet gear is ensured. In order to test a performance of clean conveyor and turning device which is composed with magnet gear, a clean class 10 environment booth is used for a trial test. It is verified that the magnet conveyor can be acceptable under a condition of clean class 10 by a result of trial test about transfer speed, maximum torque permission, cleanness, maximum transfer weight, existence of hunting and degree of noise.

• Journal of the Korea Convergence Society
• /
• v.8 no.10
• /
• pp.193-199
• /
• 2017

Mechanical tappet is used to reduce the cost and friction loss compared with hydraulic tappet. But the mechanical tappet doesn't have the ability to control the clearance between cams and valves and is selected by measuring the distance between valves and cams in order to minimize the clearance of valves by considering thermal expansion of valves. So, the valve clearance is nearly zero after fully warming-up periods, but there is valve clearance before warming-up. Especially at cold condition, the clearance is relatively large and can bring about some problems. In this study, the valve motions like lift, velocity, seating velocity and bouncing height were studied at various valve clearance conditions by experiment and analysis. As the valve clearance increases, the ramp area becomes shorten and it causes the valve train motion to have bad effects.

• Computational Structural Engineering
• /
• v.7 no.1
• /
• pp.99-107
• /
• 1994

Viscoelastic materials are widely used to solve the vibration and noise problems. To apply the well-known damping technologies successfully to the vibration and noise problems, the damping characteristics of the viscoelastic materials applied to the base structures must be thoroughly understood. The objectives of the present study are : 1) to establish the damping measurement technique via modal testing by which the damping characteristics of viscoelastic materials can be measured in the university laboratory environment, and 2) to develop a computer program to draw the reduced-frequency-nomogram by use of restricted number of experimental data, which can be used efficiently for the damping analysis and application.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.399-405
• /
• 2004

Recently technology resulted in highly efficient and multiple-functional electric appliances considering environmental problems. One of the environmental problems is noise of a product in respect to its function. A vacuum cleaner is an essential electric appliance in our daily lives. However, severe noise resulted from high motor speed for improving the function of the appliance is a nuisance for the user. This noise is caused by vibration from various parts of the appliance and fluid noise during a series of intake and exhaust processes while rotating the impeller connected to the axle at a high speed of the fan motor inside the vacuum cleaner rotating around 30,000-35,000 rpm. Despite the fact that many researchers conducted studies on reducing the noise level of the fan motor in a vacuum cleaner, only few studies have been conducted considering both the theoretical and experimental aspects using fluid analysis by measuring vibration and noise. Moreover, there has not been a study that accurately compared major noise data obtained considering both of the aspects. In this study, both aspects were considered by considering the following experimental and theoretical methods to verify the major causes of noise from the fan motor in a vacuum cleaner.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.5
• /
• pp.735-741
• /
• 1986

An experimental study on the effects of exhaust pipe curvature on the performance of a diesel engine is presented. The experiments were carried out on a 4-cycle, 216 c.c diesel engine and two types of pipe curvature, circular arc and rectangle, were tested. The shaft output, shaft torque and specific fuel consumption were obtained by inserting bent pipes of different dimensions into the exhaust pipe at various engine operation conditions. It was found that the engine performance was decreased by the circular arc bent pipe and the effects were dominated by its arc angle. The decrease of engine performance was minimized by the arc angle of 180.deg.. By the rectangle pipes the performance was more decreased and the effects were little influenced by its dimensions.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.155-161
• /
• 2015

As the popularity of the smartphone becomes increase, indoor smartphone positioning technology has been actively studied. The acoustic signal generated from the smartphone is received from the several microphones at the relative positioning system, and the trigger signal is proposed to mitigate the multipath effect and the effect is verified. But for the simple trigger method, there would be error occurred according to the variation of the distance or surrounding noise. In this paper, in order to resolve the problems, the dynamic trigger threshold technology is proposed and its effect is verified by the experiment.