• Resources Recycling
• /
• v.8 no.1
• /
• pp.23-28
• /
• 1999

Firing characteristics, transverse rupture strength, and heat capacity were studied of the heat-reservoir refractory materials made of red-firing clay, mill scale, and water glass. The firing shrinkage increased with increase of the clay proportion in samples. The volume of fired bodies showed shrinkage by drying up to $300^{\circ}C$, steady expansion in the 300-$700^{\circ}C$ range due to phase transition of iron oxides. and drastic expansion above $1200^{\circ}C$. Flexural strength decreased from 5.6 Mpa to 2.35 Mpa with the decrease of the ratio of clay to mill scale from 1:1 to 1:3 Heat capacities changed from 1.1 Joul/g$^{\circ}$C to 1.35 Joul/g$^{\circ}$C with the ratio of millscale to clay ratio from 1:1 to 1:3. Mill scale in the specimen appears to exist as liquid phase during firing. Firing the specimens in air leads to the eruption of the molten mill scale to the sample surfaces. Contrarily, firing samples in a refractory sagger with a cover suppressed the eruption of the molten mill scale to the surfaces. The addition of mill scale gave rise to porous sintered bodies which would delay cooling rates of heat-reservoir brick.

• Journal of Conservation Science
• /
• v.19
• /
• pp.31-42
• /
• 2006

There are many materials used in restoring missing parts of pottery and ceramics and they are used according to the each quality of materials. In our research we tried to find the new repair materials to solve many problems exposed in the existing repair materials. As a result, we made new repair materials that we properly put oven bake clays into repair epoxy putty which is being used as oven bake clays for a long time. Fortunately, through testing yellowing, vickers hardness, coloring and heating temperature, We could get an idea that new repair materials would be the best materials in the efficiency of restoration, yellowing, and coloring.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.247-256
• /
• 2003

FEM analyses which are based on modified Cam-clay theory have been generally used in such cases as analyses of stability and displacement fur embankment construction on soft clays. However, the Modified Cam Clay Model can generate some problems in anisotropic stress conditions of field because the critical state theory has been developed through many laboratory tests in isotropic conditions. Thus, the applicability on the prediction of undrained shear strength and pore water pressure which was based on the critical state theory was evaluated by triaxial tests and numerical analyses in isotropic and anisotropic conditions. Used samples often come out in domestic area, together with general low plastic clays which are showing dilatant behavior in shearing process. They were evaluated by laboratory tests and FEM based on MCCM. From the results of test and numerical analysis, the predictions of undrained strength in low plastic clays well coincided with each other in both isotropic and anisotropic conditions. However, the generation of porewater pressure was often overestimated during undrained shearing in anisotropic conditions. The results can generate the errors in the prediction of stress path of field sites during loading such as construction of embankment on soft clays because the field is subjected to anisotropic conditions during loading.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.2
• /
• pp.29-34
• /
• 2007

This study examines the effects of heat treatment under laboratory conditions for mixtures of two types of clay (kaolinite and montmorillonite). Clay samples were burned with different temperatures ranging from $100^{\circ}C\;to\;500^{\circ}C$. The Atterberg limits such as liquid and plastic limits were influenced with heat treatment. According to the experimental results, the liquid limits slightly decreased between $100^{\circ}C\;to\;300^{\circ}C$, whereas rapid decreases were observed after $300^{\circ}C$. The plastic limits did not show noticeable differences in the interval $100^{\circ}C\;to\;400^{\circ}C$. But the clay samples showed non plastic behavior at $500^{\circ}C$. The amount of NaCl was getting decreased with temperature. It also revealed that the pH values were also influenced with heat treatment, and the cation exchange capacity (C.E.C) values decreased with temperature.

• Cement Symposium
• /
• no.30
• /
• pp.49-62
• /
• 2003

• Cement Symposium
• /
• no.32
• /
• pp.41-48
• /
• 2005

• Water for future
• /
• v.43 no.9
• /
• pp.74-77
• /
• 2010

• Geotechnical Engineering
• /
• v.11 no.3
• /
• pp.37-42
• /
• 1995

The laboratory hydraulic conducti vita tests with rigid wall permeameter were performed to study the effects of waste leachate on the permeability of a marine clay. The marine clay and waste leachate for this study were sampled from Kimpo Wastefills, and the hydraulic gradients applied to the clay specimens aTe relatively high from 37.5 to 225. The test results show that the permeability of a marine clay is increased with increasing the concentration of leachate and with decreasing the hydraulic gradient. And also both the liquid limit and the plasticity index of the marine clay miRed with waste leachate decrease with increasing the concentration of leachate.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.2
• /
• pp.95-101
• /
• 2001

연약한 점토 지반에 안벽을 축조하고 매립하는 경우, 안벽의 기초로서 케이슨 기초공법이 종종 쓰이고 있다. 케이슨 기초는 안벽의 연직 하중을 지지층에 전달할 뿐만 아니라, 매립하중에 의한 연약 점토의 횡방향 소성 유동에 대하여는 매우 효과적인 공법으로 호안공사에서 그 사용 빈도가 증가하고 있는 추세이다. 반면 매립하중에 의해 점토지반에서 장기간에 걸쳐 발생하는 압밀침하에 대해서는 아무런 역할을 하지 못하는 단점이 있다. 따라서 본 연구에서는 기존 케이슨 기초의 배면에 다수의 강관 배수공을 설치함으로써 과잉간극수압의 횡방향 소산을 촉진시켜 압밀 시간을 단축시키는 \"매립측 연약점토 압밀촉진 케이슨 기초공법\"을 제안하였다. 이 새로운 케이슨 공법의 압밀촉진 효과를 분석하기 위하여 2차원 압밀방정식의 해석해를 유도하였다. 연구결과, 등방성 점토에서 압밀촉진 케이슨 사용시 ξ=0.1인 단면에서 평균압밀도 50%, 90%에 이르는 시간이 기존 케이슨을 사용한 것에 비해 각각 약 7배, 3.5배 단축되는 것으로 나타났다. 것으로 나타났다.

• Resources Recycling
• /
• v.19 no.3
• /
• pp.16-23
• /
• 2010

Coal briquette use has dramatically increased because of high oil prices. Hence, it is necessary to develop an environment-friendly recycling technique of the coal briquette ash. The coal briquette ash contains a large amount of an unburned carbon content and a mullite with high thermal property, so it is considered to be used as raw materials of sintered eco-brick. This study aimed to investigate on how the unburned carbon affects properties of the sintered eco-brick. The eco-brick was mixed with the ratio of 50 wt% coal briquette ash having the unburned carbon 10.5 wt% and 50 wt% cullet, then being sintered at $950^{\circ}C$, which of the compressive strength was in line with the first class of the sintered clay brick standard(KS L 4201). In particular, the compressive strength of the sintered eco-brick was equal to the first class of the KS L 4201 despite the increase of mixing ratio for coal briquette ash with 1.0 wt% unburned carbon to 70 wt%.