• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.372-379
• /
• 2023

International oil prices are expected to increase from $85 a barrel this year to up to $100 a barrel in the second half of the year; this is likely to increase orders for offshore plants in the global market. One main characteristic of offshore plants is that a large helideck is located on the top side, and aluminum alloys are used as the basic material of the structure for weight reduction and corrosion resistance. Shipowners are increasing the size of helicopters to quickly evacuate lives in the event of an emergency, and the safety use load of devices that can stably secure helicopters to the deck is also required to increase. Owing to the nature of the aluminum material, the structural strength caused by welding is greatly reduced; therefore, the fixing device must be designed by embedding it in the deck and fixing it with bolts. In this study, a model applying aluminum alloy 6082-T6 was developed to develop a helicopter fastening device that can be used for large helidecks (diameter = 28 m). The developed item was verified through nonlinear structural strength calculation to satisfy the load used for the actual fastening condition. The load condition with a 45° showed a lower ultimate strength than the 90° case owing to local plastic collapse. The nonlinear structural collapse behavior showed a result similar to that of the experimental test. The main contents derived from this study are considered to be reference materials when evaluating the structural strength of similar aluminum equipment.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.10
• /
• pp.47-66
• /
• 2019

A parametric numerical analysis according to diameter, length, and N values of soil was conducted for the PHC pile socketed into weathered rock through sandy soil layers. In the numerical analysis, the Mohr-Coulomb model was applied to PHC pile and soils, and the contacted phases among the pile-soil-cement paste were modeled as interfaces with a virtual thickness. The parametric numerical analyses for 10 kinds of pile diameters were executed to obtain the load-settlement relationship and the axial load distribution according to N-values. The load-settlement curves were obtained for each load such as total load, total skin friction, skin friction of the sandy soil layer, skin friction of the weathered rock layer and end bearing resistance of the weathered rock. As a result of analysis of various load levels from the load-settlement curves, the settlements corresponding to the inflection point of each curve were appeared as about 5~7% of each pile diameter and were estimated conservatively as 5% of each pile diameter. The load at the inflection point was defined as the mobilized bearing capacity ($Q_m$) and it was used in analyses of pile bearing capacity. And SRF was appeared above average 70%, irrespective of diameter, embedment length of pile and N value of sandy soil layer. Also, skin frictional resistance of sandy soil layers was evaluated above average 80% of total skin frictional resistance. These results can be used in calculating the bearing capacity of prebored PHC pile, and also be utilized in developing the bearing capacity prediction method and chart for the prebored PHC pile socketed into weathered rock through sandy soil layers.

• Journal of the Korea Concrete Institute
• /
• v.20 no.1
• /
• pp.13-22
• /
• 2008

The initiation and growth processes of cyclic ice body in porous systems are affected by the thermo-physical and mass transport properties, as well as gradients of temperature and chemical potentials. Furthermore, the diffusivity of deicing chemicals shows significantly higher value under cyclic freeze-thaw conditions. Consequently, the disintegration of concrete structures is aggravated at marine environments, higher altitudes, and northern areas. However, the properties of cyclic freeze-thaw with crack growth and the deterioration by the accumulated damages are hard to identify in tests. In order to predict the accumulated damages by cyclic freeze-thaw, a regression analysis by the response surface method (RSM) is used. The important parameters for cyclic freeze-thawdeterioration of concrete structures, such as water to cement ratio, entrained air pores, and the number of cycles of freezing and thawing, are used to compose the limit state function. The regression equation fitted to the important deterioration criteria, such as accumulated plastic deformation, relative dynamic modulus, or equivalent plastic deformations, were used as the probabilistic evaluations of performance for the degraded structural resistance. The predicted results of relative dynamic modulus and residual strains after 300 cycles of freeze-thaw show very good agreements with the experimental results. The RSM result can be used to predict the probability of occurrence for designer specified critical values. Therefore, it is possible to evaluate the life cycle management of concrete structures considering the accumulated damages due to the cyclic freeze-thaw using the proposed prediction method.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.1
• /
• pp.118-131
• /
• 1995

The shock fracture analysis for the structures of navy vessels subject to underwater explosions or of high speed vessels frequently subject to impact loads has been carried out in two steps such as the global or macro analysis and the fine or micro analysis. In the macro analysis, Doubly Asymptotic Approximation(DAA) has been applied. The three main failure modes of structure members subject to strong shock loading are late time fracture mode such as plastic large deformation mainly due to dynamic plastic buckling, and the early time fracture mode such as tensile tearing failure or transverse shear failure. In this paper, the tensile tearing failure mode is numerically analyzed for the micro analysis by calculating the dynamic stress intensity factor $K_I(t)$, which shows the relation between stress wave and crack propagation on the longitudinal stiffener of the model. Especially, in calculating this factor, the numerical caustic method developed from shadow optical method of caustic well known as experimental method is used. The fully submerged vessel is adopted for the macro analysis at first, of which the longitudinal stiffener, subject to early shock pressure time history calculated in macro analysis, is adopted for the micro analysis.

• Journal of Life Science
• /
• v.27 no.8
• /
• pp.965-973
• /
• 2017

Conjugated linoleic acid (CLA) is a group of positional and geometric isomers of linoleic acid with conjugated double bonds at C9,C11 and C10,C12 positions. Of possible CLA isomers, a naturally occurring CLA isomer is c9,t11-CLA which is produced from linoleic acid by linoleate isomerase from various rumen and lactic bacteria, and mushroom mycelia. Meanwhile, synthetically prepared CLA contained an equal amount of c9,t11-CLA and t10,c12-CLA isomers, and other isomers as minor constituents. CLA was firstly mentioned in 1939 during the elaidinization reaction of linoleic acid. Thereafter, CLA was not an attractant to scientists because it was not scientifically interested any more. However, since the anticarcinogenic action was driven from 7,12-dimethylbenz[a]anthracene (DMBA)-induced mouse skin carcinogenesis in 1987, CLA-related researches were drastically elevated, resulting in approximately 6,100 research papers in literature, so far. CLA exhibited the significant biological activities: anticarcinogenic, antidiabetic, antihypertensive, antiatherosclerotic, body-fat reducing, antioxidative, antiinflammatory, testosterone producing and other activities. Interestingly, two major CLA isomers, c9,t11-CLA and t10,c12-CLA, exhibited different biological activities. Meanwhile, t,t-CLA isomers which is minor constituent of chemically synthesized CLA from linoleic acid exhibited more potent anticarcinogenic activity in carcinogen-induced animal models and cancer cell lines than other CLA isomrs. In the present review, the significant biological activities of CLA were discussed along with historical studies of CLA since 1939.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.1
• /
• pp.1-21
• /
• 2020

The domestic abandoned mines are generating subsidence and it is difficult to predict this subsidence and evaluate the risk. The study of the subsidence risk evaluation using the existing numerical analysis only applies the integrative property to the geological structure and ground condition, and analyzes the goaf peripheral plastic domain. Also, there is a realistic limit that only restricted materials can be apprehended in securing the input information, which leads to the low reliability of the numerical analysis result. In this study, 2-dimensional modeling was performed by applying the field geological structure and ground information targeting abandoned mine where the subsidence occurred. Also, the analysis model was revised by repeating the numerical analysis for the difference between the real subsidence ground information and the analysis result to be minimized by modifying the ground property. This revision was automated by applying the optimization technique and the gradational optimal design method dividing multiple ground properties was developed.

• Journal of the Korea Concrete Institute
• /
• v.26 no.3
• /
• pp.377-384
• /
• 2014

Recently, the trend toward larger architectural structures continues and accelerates demand for Ultra High Strength Concrete (UHSC) which satisfies structural performance. However, UHSC has weakness in fire and the performance tests are required. In this paper, the change of mechanical properties of 100 MPa grade UHSC exposed to high temperatures ($20^{\circ}C{\sim}800^{\circ}C$) was observed to develop high temperature material model of UHSC: residual compressive strength, modulus of elasticity, property of stress-strain on monotonous loading and property of stress-strain on cyclic loading. In addition, TG/DTA and SEM Images analyses were performed to investigate chemical and physical characteristics of UHSC, and the results of this research were compared with those of previous studies. As a result, UHSC at the heating temperature of $300^{\circ}C$ showed a sharp decrease of residual compressive strength and modulus of elasticity. And It was shown that UHSC had a plastic behavior at more than $400^{\circ}C$ on the cyclic loading and revealed a same tendency in both monotonous and cyclic loading of all heating temperatures. In addition, through TG/DTA and SEM images analyses compared with those from previous studies, it was shown that the deterioration of concrete inner tissue, water evaporation and chemical reaction caused the decrease of residual compressive strength and modulus of elasticity.

• Journal of the Korea Concrete Institute
• /
• v.19 no.3
• /
• pp.265-273
• /
• 2007

The most common structural system for apartment buildings in Korea is adopted to combine structural systems: for example, a moment-resisting frame will be used for lower stories and bearing wall system for the upper stories. This type of buildings have soft and/or weak stories in lower stories, and it may lead to collapse of those buildings during the large earthquake. Reversed cyclic load tests were conducted to estimate the performance and behavioral characteristics of deep beam and exterior column Joints. Experimental parameter is the amount of transverse reinforcement (designed by ACI code and Sheikh's procedure). The results of this study are as follows: (1) The required transverse reinforcement of column designed by Sheikh's procedure requires 2.9 times larger than that designed by ACI procedure. Large amount of transverse reinforcement increase the ductility of the column. (2) Most of the lateral drift in the column is due to the flexural deformation in the joint and plastic hinge region and up-lift rotation. (3) Transverse reinforcement in the exterior column shall be required not only in the hinge region but also in the joint.

• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.105-113
• /
• 2014

PURPOSES: The objective of this paper is to select the confidential intervals by utilizing the second moment reliability index(Hasofer and Lind; 1974) related to the number of load applications to failure which explains the fatigue failure and rut depth that it indicates the permanent deformation. By using Finite Element Method (FEM) Program, we can easily confirm the rut depth and number of load repetitions without Pavement Design Procedures for generally designing pavement depths. METHODS : In this study, the predictive models for the rut depth and the number of load repetitions to fatigue failure were used for determining the second moment reliability index (${\beta}$). From the case study results using KICTPAVE, the results of the rut depth and the number of load repetitions to fatigue failure were deducted by calculating the empirical predictive equations. Also, the confidential intervals for rut depth and number of load repetitions were selected from the results of the predictive models. To determine the second moment reliability index, the spreadsheet method using Excel's Solver was used. RESULTS : From the case studies about pavement conditions, the results of stress, displacement and strain were different with depth conditions of layers and layer properties. In the clay soil conditions, the values of strain and stresses in the directly loaded sections are relatively greater than other conditions. It indicates that the second moment reliability index is small and confidential intervals for rut depth and the number of load applications are narrow when we apply the clay soil conditions comparing to the applications of other soil conditions. CONCLUSIONS : According to the results of the second moment reliability index and the confidential intervals, the minimum and maximum values of reliability index indicate approximately 1.79 at Case 9 and 2.19 at Case 22. The broadest widths of confidential intervals for rut depth and the number of load repetitions are respectively occurred in Case 9 and Case 7.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.117-117
• /
• 2000

제지공정의 마지막 단계인 캘린더는 지필의 표면을 평활하게 하고 두께를 감소시켜 균일 하게 하는 역할을 한다. 하지만 캘린더링은 인장강도 둥의 강도적 성질과 불투명도 등 광학 적 성질을 저하시키는 공정이기도 하다. 따라서 캘린더령 공정에 의한 제품 품질의 저하를 극소화하기 위해서는 공정인자의 엄밀한 관리가 요청된다. 캘린더링의 주요 공정인자에는 온도와 압력, 닙 체류시간, 유입지의 함수율, 유입지의 온도 롤의 재질 등이 있다. 이 가운 데 특히 캘린더링 온도와 압력은 주요한 공정 인자이다. 따라서 이들 변수에 의한 캘린더링 공정의 변화를 정확하게 파악하는 것은 매우 중요하다. 캘린더링 공정의 속도와 관련된 닙 체류시간과 유입지의 함수율, 유입지의 온도, 롤의 재질 등은 실제 공정에서 변화시키기 어 려운 반면 온도와 압력은 조절이 비교적 용이한 특정도 지니고 있다. 캘린더링 전후의 종이의 물성 차이는 지필 내부로의 열 침투에 의한 열변형에 따라 크게 달라진다. 셀룰로오스는 유리전이온도 이상으로 가열되면 그 성질이 크게 변화하므로 캘린 더링 시의 온도가 유리전이온도보다 높거나 낮은 경우 캘린더링된 종이의 물성 차이가 크게 달라질 수 밖에 없다. 캘린더령은 비정상상태에서 진행되기 때문에 지펼의 내층보다는 표층 으로부터 순차적으로 열변형이 발생하는 공정이다. 그러므로 지필의 두께 방향으로의 열 침 투 현상의 해석을 통하여 캘린더링 시 유리전이온도가 어느 깊이까지 도달하는가를 파악하 는 것은 캘린더링 공정의 해석에 매우 중요하다. 캘린더링 공정에서 발생하는 열전달현상 해석 시 지필의 압축을 고려하지 않고 비압축성 물질로 가정하는 것은 캘린더링 공정 인자 중 압력에 의한 영향을 제대로 평가하지 못하는 한계를 지니게 된다. 따라서 본 연구에서는 지펼의 압축성을 고려하여 캘린더링 모델을 정립 하고, 이를 토대로 캘린더링 공정 조건에 따른 열 침투 현상을 해석코자 하였으며, 그 방법으 로 수치해석기법을 도입하였다. 또 실제 캘린더링 전후의 두께 변화를 측정하여 유리전이온도 의 도달 깊이와 비교하였다. 지필의 압축 정도는 롤의 직경과 닙 폭을 이용하여 MD 방향으 로 함수화하였으며, 열전달 계수로는 겉보기 값을 사용하였다. 이때 지펼은 균질한 것으로 가 정하였다. 함수율은 유리전이온도를 좌우하는 가장 큰 인자이나 본 연구에서는 항온항습처리 를 통해 유입지의 함수율을 고정시켰으며 캘린더링 시 함수율의 변이는 없다고 가정하였다. 그 결과 열침투깊이가 증가할수록 지필은 보다 변형되기 쉬운 상태가 되어 주어진 압력 조건에 대해 소성변형 정도가 증가하는 것으로 나타났다. 이는 캘린더링 전후에 두께 변화를 측정하여 정량적으로 평가할 수 있었다. 수치해석기법을 통해 같은 압력 조건에서 온도가 증 가함에 따라 혹은 같은 온도 조건에서 압력이 증가함에 따라 지필 내의 유리전이온도의 침투 깊이가 증가함을 알 수 있었으며 이는 캘린더링 전후의 두께 변화의 측정 결과와 일치하였 다. 또 NRT가 증가함에 따라서도 유리전이온도 침투 깊이가 증가하였다.