• Korean Journal of Environmental Agriculture
• /
• v.21 no.2
• /
• pp.149-155
• /
• 2002

Two pesticides commonly used for lettuce cultivation including chlorpyrifos and procymidone were subjected to a field residue trial to ensure safety of terminal residues in the harvest. After pesticides were applied at standard and double rates in a foliar spray, leaf persistence of their residues was investigated far 10 days prior to harvest. Even though far exceeded the tolerances, initial leaf residues were rapidly dissipated with time and remained only 0.4$\sim$7.2% of the residues in the harvest. As well fitted by the first-order kinetics, biological half-lives of the pesticide residues in lettuce leaves ranged 1.2$\sim$2.6 days. Slow dissipation of the residues in the harvest was observed during storage at room temperature and 4$^{\circ}C$ for 7 days. Portions of dislodgeable residues which resided in detergent washings decreased as time elapsed. Patterns in dissipation and distribution of dislodgeable residues were not largely affected by the application rate of pesticides. It is concluded that timing of pesticide application, that is, pre-harvest interval would be the first factor to determine the terminal residue level in edible portions of lettuce.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 2003.09a
• /
• pp.109-109
• /
• 2003

성문 하방으로 진행된 후두암이나 하인두암, 기관의 침범이 있는 갑상선암 혹은 기공주변 재발암 등의 경우에 적절한 절제연을 얻기 위하여 상부기관륜 일부의 절제가 불가피하며 이때 만들어지는 영구 기관개구창은 일반적인 기관개구창에 비하여 하부에 위치하게 되며 보다 하부로의 기관 절제가 필요한 경우 기관과 주위 피부와의 봉합이 힘들고 경우에 따라서는 종격동 기관개구창을 만들어야 할 경우도 있다. 그리고 기관주위의 림프절이나 상부종격동 림프절 청소술을 병행한 경우나 후두전절제술 후 인두피부누공에 의한 창상감염이 생긴 경우, 기관주위 조직의 제거 후에 노출된 중요혈관의 보호와 광범위하게 제거된 결손부위를 덮기 위해 재건이 필요하게 된다. 대흉근피판은 혈관경이 일정하고 혈액 공급이 풍부하여 감염이 있거나 재건 후 감염을 방지하는데 사용될 수 있으며 피판 경의 길이가 대부분의 두경부 부위에 도달할수 있을 정도로 길고 근육의 부피가 충분하여 결손부위가 넓은 경우에 유용한 장점이 있다. 특히 종격동 림프절 청소술 후에나 하부 기관공의 재건을 위하여서는 한 수술시야에서 시행할 수 있는 인접한 부위 근피판 이라는 장점이 있고 필요시에는 이중도서(double-island) 형태로 접어서 이중피판으로 사용할 수도 있으며 피부이식과 병용하면 경부 피부의 재건도 동시에 시행할 수 있다. 저자들은 광범위한 기관륜의 제거 후 영구 기관개구창이 경부 하방이나 흥부 상부에 위치하게 되어 안쪽으로 말려들어가는 기관개구창 주변부위와 기관주위 결손 부위의 재건, 그리고 무명 동맥 등의 중요 구조물의 보호를 위해 사용된 대흉근 피판의 여러 작도법(design)과 응용, 결과를 종합하여 하부 기관개구창 재건에 있어 대흉근피판의 유용성을 살펴보고자 하였다. 한다. 본 연구의 결과를 이용하여 향후 전개될 홈 네트워크 서비스 및 관련시장의 발전 방향을 전망해 보고 이에 따른 기업이나 정부차원의 대응전략을 파악하고자 한다.육구에서는 큰 변화를 나타내고 있지 않았다(p<0.05). 운동과 비운동시킨 참돔의 지질 함량의 변화는 운동시킨 참돔은 운동으로 인한 에너지 소비로 인하여 함량이 유의적으로 감소했으며(r=-0.35), 비운동사육구에서는 절식으로 인하여 지질함량이 감소하였다(r=-0.38). 파괴강도와 가장 밀접한 영향을 가지는 콜라겐은 운동과 비운동 모두 사육기간동안 큰 변화는 보이지 않았다. 초기의 파괴강도값은 1.45±0.02kg(운동사육구), 1.36±0.18kg(비운동사육구)이였으며 사육기간동안 운동사육구는 파괴강도값이 증가한 반면, 비운동수조에서는 참돔의 파괴강도는 사육기간동안 큰 유의차가 없었다. 각 성분간의 상관도를 살펴보면, 수분함량과 파괴강도는 상관성을 가졌으며, 지질함량과 파괴강도도 같은 경향은 나타내었다. 운동기간동안의 파괴강도와 콜라겐 사이에는 상관성의 거의 없었다. 이는 운동기간에 따른 파괴강도의 증가가 콜라겐의 함량의 증가보다는 지질함량의 감소와 수분함량의 증가와 같은 성분과의 상관성이 크다고 판단된다. 다음으로는, 운동횟수에 의한 영향으로써 운동시간을 1일 6시간으로 설정하여, 운동횟수를 결정하기 위하여 오전, 오후에 각 3시간씩 운동시키는 방법과 오전부터 6시간동안 운동시키는 두 방법을 이용하여 품질을 비교하였다. 각 조건에 따라 운동시킨 참돔의 수분함량을 나타낸 것으로, 2회(오전 3시간, 오후 3시간)에 나누어서 운동시키기 위한 육의 수분함량은 73.37±2.02%를 나타냈으며, 1회(6시간 운동)운동시키기 위한 육은 71.74±1.66%을 나타내

• Journal of Korea Water Resources Association
• /
• v.45 no.1
• /
• pp.65-73
• /
• 2012

Recently climate change and increase of surface runoff caused the urban flooding. Traditional way of dealing with urban flooding has been to increase the sewer capacity or construction of pumping stations, however, it is practically almost impossible because of time, money and traffic problems. Multipurpose DRMS (Decentralized Rainwater Management System) is a new paradigm proposed and recommended by NEMA (National Emergency Management Agency) for both flood control and water conservation. Suwon City has already enacted the ordinance on sound water cycle management by DRMS. In this study, a flood prone area in Suwon is selected and analysis of DRMS has been made using XP-SWMM for different scenarios of RT installation with same total rainwater tank volume and location. Installing one rainwater tank of 3,000$m^3$ can reduce the peak flow rate by 15.5%. Installing six rainwater tanks of 500$m^3$ volume in the area can reduce the peak flow rate by 28%. Three tanks which is concentrated in the middle region can reduce peak rate more than evenly distributed tanks. The method and results found from this study can be used for the design and performance prediction of DRMS at a flood prone area by supplementing the existing sewer system without increase of the sewer capacity.

• KDI Journal of Economic Policy
• /
• v.30 no.2
• /
• pp.129-155
• /
• 2008

The rate of antibiotics prescription for an acute airway infection significantly varies depending upon the diagnosis type, specialty, and the location of the hospital along with many other related factors. The objective of this study is to empirically investigate the possible relationship between the antibiotics prescription rates for an acute airway infection and the degree of competition in the hospital market regions of mainly the providers of primary medical care services such as clinics, internal medicines, pediatrics and otorhinolaryngology department. Using the data from Health Insurance Review and Assessment Service (HIRA) regarding the hospitals' antibiotics prescription rates for the acute airway infection and controlling for selected variables of demand and supply sectors, this study tries to figure out that the degree of competition in the hospital market, regardless of what type of competition indexes we employed, has a statistically significant effect on the variations of antibiotics prescription rate of the clinics in local areas. This result implies that as an economic consideration itself, the change in the degree of competition in the hospital market can play a crucial role influencing the treatment behaviors of the medical doctors. More specifically, this study reveals that as the degree of competition increases the antibiotics prescription rate goes up. This result means that if the market becomes more competitive in a specific region so that it might cause a reduction in doctor's income, doctors with rational decision-making process, recognize that the benefit created from inducing patients' seemingly unnecessary demand for medical care (income effect) would be higher than the costs associated with sustaining their targeted income (substitution effect). It is because that the doctors are more likely to prescribe antibiotics which create relatively higher margins than other medical care services in order to sustain their targeted income when the hospital market competition becomes tighter. Even though this study empirically confirms that antibiotics prescription can be affected by the economic incentives, it still raises following issues as limitations of the study: first issue is about the representativeness of the hospital regions segregated for this study, which might be weak in explaining whether these regions are mutually exclusive in reality. Patients actually consider the quality of services, transportation cost, time costs, and any other related factors choosing the doctors or hospitals, and in that sense, this study rules out 'border-crossing' in using the medical care services. Second issue arises in capturing the data of antibiotics prescription rate. Since we use the average rate for each medical institution, we cannot figure out the average rate for each patient so that we are not able to control for the variation of patients' medical conditions. It is because of the unavailability of data regarding each patient's medical condition from HIRA. Thirdly, since this study mainly analyzes the medical institutions providing primary care such as clinics, internal medicines, pediatrics, and otorhinolaryngology department, it is skeptical of whether those institutions can represent the hospital market in respective regions and truly reflect the degree of competition. It needs to extend the study areas and disease types as well as any micro data for future studies.

• Food Science and Preservation
• /
• v.24 no.5
• /
• pp.565-575
• /
• 2017

This study was carried out to investigate shelf-life and quality of fresh-cut Dungkunma (Dioscorea bulbifera) in order to elevate utilization of Dungkunma a fresh food. Before vacuum-packaging (in polyethylene/polypropylene film ($100{\mu}m$, $15{\times}20cm$, $75{\pm}2cmHg$) and storaging at $2^{\circ}C$, Dungkunma was peeled out and cut to dice type ($2.0{\pm}0.5cm^3$), and then washed and blanched using hot water (at $90{\pm}2^{\circ}C$ with 2% NaCl solution for 30 sec). Blanched Dungkunma was pre-dried at room temperature, $40^{\circ}C$ and $50^{\circ}C$ for removing surface water. Each peeled dice Dungkunma was packed 50 g in polyethylene/polypropylene film ($100{\mu}m$, $15{\times}20cm$) with vacuum treatment ($75{\pm}2cmHg$) and stored at $2^{\circ}C$ for 90 days. Hardness and adhesiveness of Dungkunma blanched by 2% NaCl and pre-dried at $50^{\circ}C$ (SB50) were the highest, but changes were the least during storage. Lightness and yellowness of stored Dungkunma in all treatments decreased slightly while redness increased during storage. Changes of color of SB50 was the least. Total concentration of aerobic bacteria in SB50 was $1.88{\pm}0.18log\;CFU/g$ during 90 days and E. coli was detected in all treatments during whole storage periods. Dioscin and allantoin contents of SB50 were virtually unchanged during the storage. Consequently, the results of this study suggest that vacuum packaged Dungkunma after blanching using 2% NaCl solution could be effective to prolong the quality of fresh-cut Dungkunma.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.1
• /
• pp.47-53
• /
• 2017

In this study we surveyed the preferences of consumer packaging for mini pot flower plants to improve the flower market application in Korea. The surveys were consisted of the consumers residing in Seoul metropolitan (221), Gyeonsang (70), Jeonla (29), Chungceong (19), Gangwon (7), other provinces (3). A total of 349 eligible respondents (male 173, female 176) were surveyed with a self-administered questionnaire asking on the general characteristics for residents, packaging material, packaging design, type of flower pot, degree of transparency, convenience, consumer's demand for packaging development, a significant point when purchasing the flower pot product. The collected date was analyzed using a chi-square (${\chi}^2$) statistical test in SPSS program. Most residents prefer for mini pot flower plants packed with packaging characteristics of plastic material (56.4%), packaging design of separated type (76.2%), angled type (62.5%), and transparency (48.6%). The other question results showed that major consumer's demand for mini pot flower plants is maintaining the freshness quality and stability structure for them. Transparency of packaging can also affect directly the preferences for purchasing the mini pot flower plants. The packaging structure with a proper shape design may protect the fresh mini pot flower plants from shock or any other damage during distribution. The results of this study help to provide consumer's demand for packaging development and to give the greatest advantages in terms of production and marketability of mini pot flower plants.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.537-544
• /
• 2020

Beef consumption trends are changing according to consumer needs and preferences. This study was conducted to collect the fundamental information by investigating the consumer's preference and purchase propensity of beef(Hanwoo beef) for improvement of Korean beef grading system. Consumers were recruited from Seoul, Gyeonggi-do, and 5 metropolitan cities, and surveyed from July 24 ~ August 14, 2017. The data obtained from 362 consumers were finally selected for the verification process. Results from the Hierarchical Regression Analysis reveal that the increased purchasing frequency is positively correlated with the following factors, in the consumer group showing preference in the Quality Grade (QG) of beef: marbling type 1QG, fat color 1⁺QG, and income, grade opinion, marbling contents and type 1⁺⁺QG. Conversely, no factor affected the increased purchasing frequency in the consumer group having no preferred QG for beef (p>0.05). Our study determined significant differences in the factors affecting increased purchase frequency of beef among the different groups, classified depending on their preferred QG. The grading system is important since it directly correlates with profit for livestock farmers and the industry. We therefore propose that the grading criteria need to be revised reasonably but scientifically, considering various opinions of the producers and consumers.

• Information Systems Review
• /
• v.13 no.1
• /
• pp.75-96
• /
• 2011

This research uses coolhunting to predict the future trend of e-Commerce industry. Coolhunting is a method to take Cool Trends which are the future trend through social network analysis for discovering the trendsetter and its collective intelligence. Coolhunting is generally carried out by social network analysis while this research uses NodeXL of social network analysis tools. We designed industrial network research model for relation among e-Commerce corporation, product, the types of customer service and customer service employee to discover the Cool Trends of e-Commerce industry. According to the result of this research, e-Commerce industrial network was being changed from chaos to collective intelligence form. As a analysis result for network influences, we found that Cool Trends of e-Commerce industry invigorate social commerce industry through the collective intelligence focusing intelligence VIP, Excellence, grade of Administrating for women customers(trendsetter) and it promotes semantic consumption from customers and purchasing power will be concentrated on cosmetic, beauty, perfume product categories in social commerce. We propose the strategic direction for e-Commerce corporation and hope that domestic e-Commerce corporation continues to grow and high-quality services are provided for customers.

• Journal of Sensor Science and Technology
• /
• v.12 no.2
• /
• pp.72-78
• /
• 2003

To observe the effect of excitation coil pitch on the micro fluxgate magnetic sensor, two sensors are fabricated using multi layer board process and the pitch distance of excitation coil are $260\;{\mu}m$ and $520\;{\mu}m$, respectively. The fluxgate sensor consists of five PCB stack layers including one layer of magnetic core and four layers of excitation and pick-up coils. The center layer as magnetic core is made of a Co-based amorphous magnetic ribbon with extremely high DC permeability of ${\sim}100,000$ and has a rectangular-ring shape to minimize the magnetic flux leakage. Four outer layers as excitation and pick-up coils have a planar solenoid structure and are made of copper foil. In case of the fluxgate sensor having the excitation coil pitch of $260\;{\mu}m$, excellent linear response over the range of $-100\;{\mu}T$ to $+100\;{\mu}T$ is obtained with sensitivity of 780 V/T at excitation sine wave of $3V_{p_p}$ and 360 kHz. The chip size of the fabricated sensing element is $7.3\;{\times}\;5.7\;mm^2$. The very low power consumption of ${\sim}8\;mW$ is measured. This magnetic sensor is very useful for various applications such as: portable navigation systems, telematics, VR game and so on.

• Journal of the Korea Concrete Institute
• /
• v.23 no.3
• /
• pp.347-352
• /
• 2011

When concrete is worked in cold weather, the methods of using hot air, water and aggregate heating, accelerators are used to prevent early frosting and to improve early strength. But these methods raise problems such as implementation difficulty, high cost, and energy losses. Among the available cold weathering methods, accelerator method is the most economical but with the drawbacks of rapid setting and insufficient workability in the initial hydration stage. Therefore, the tablet method usually used for pharmaceutical field was applied to the accelerator method to compare the controlled reaction time of the new and old accelerator method. Based on the test results, physical and mechanical properties of concrete were tested and the possibility of delaying initial reactions to increase the total reaction time was evaluated. The results showed that when both accelerators and tablet were used, setting-time decreased. Physical properties of concrete were optimal for tablet 0.5% and 1.0%. Also, accelerator 0.5%, tablet 0.5% and 1.0% showed good early strengths.