• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.79-87
• /
• 2017

Korea Aerospace Research Institute has being developed a staged combustion cycle rocket (SCCR) engine with high specific impulse to send a 3-ton class satellite into geostationary orbit while conducted Korean Space Launch Vehicle (KSLV) II project. The SCCR engine is different from the KSLV-II engine, which is open cycle engine using a gas-generator. The SCCR engine with closed cycle is composed of a pre-burner, a turbo pump, and a main combustor. The technology demonstration model (TDM0) was assembled and tested in the 7ton-class engine combustion test facility of Naro Space Center, and the combustion test was successfully conducted. Afterward engine-shaped SCCR engine model (TDM1) is being designed and developed for the next combustion test.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.2
• /
• pp.122-127
• /
• 2013

The paper includes the analytic results of pressure fluctuation data from the combustion of an oxidizer-rich preburner applicable to high-performance, closed-cycle liquid rocket engine systems. The combustion experiments went through two different steps of a chamber pressure during single run. Self-excited pressure fluctuations with a frequency of 78 Hz were observed only at the relatively low chamber pressure condition. These pressure fluctuations are regarded as a bulk mode. The intensity of pressure fluctuations by a root-mean-square value is 13.3% normalized by the chamber static pressure and no pressure excitation was observed at the design pressure condition. The bulk mode has an identical phase across the inside of the chamber and reveals the similar characteristics to the Helmholtz resonator.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.4
• /
• pp.18-23
• /
• 2018

For the control of pre-burner combustion pressure, the open angle of the TTR (Throttle for Thrust Regulation) valve was varied from $143^{\circ}$ to $185^{\circ}$ while testing cold flow, ignition, and combustion. The major performance variables of rocket engines and hydraulic performance of the TTR valve regarding the open angle were verified. However, the controllability of pre-burner combustion pressure was not verified due to the limitations of the test. Comprehensive research will be done after addressing these problems.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.2
• /
• pp.118-125
• /
• 2019

Metals exposed to high temperature/high pressure/oxidant excess environment of an oxygen excess pre-combustor may undergo rapid oxidation. In this study, the test facility to simulate the high temperature/high pressure/oxidant excess environment was constructed and the oxidation resistance evaluation was carried out for various metal materials. As a result, the discoloration of the metallic materials, the change in the surface roughness and the peeling of the metal surface were observed, and the weight change was also observed. The resulst showed that oxidation-resistant coating of a metal material of the combustor is indispensably required, and the use of XM-19, which has the highest content of Cr and Ni, is expected to provide more structural stability.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.4
• /
• pp.183-197
• /
• 2009

The purpose of this paper is to study whether there are differences in the relationship between IT utilization level and organizational performance among large, medium and small-sized enterprises. This study first assessed the immediate influence of IT utilization level on organizational performance, and then further examined the moderating effects of the organizational size and the environmental dynamism that had influences on the relationship between IT utilization level and organizational performance. The empirical test revealed that IT utilization level had significant impact on organizational performance in case of all sized enterprises. But, the sub-group analysis revealed that IT utilization level had no statistically significant impact on organizational performance in case of large enterprises despite of higher IT utilization level than small and medium-sized enterprises. The relationship between IT utilization level and organizational performance was not moderated significantly by environmental dynamism in case of all sized enterprises. But, the sub-group analysis revealed that environmental dynamism had significant moderating effect on the relationship between IT utilization level and organizational performance in case of large and small-sized enterprises when there was a high level of environmental dynamism.

• Applied Microscopy
• /
• v.33 no.3
• /
• pp.233-241
• /
• 2003

Patterns of tannin accumulation in leaves of C-4 Euphorbia maculata have been examined using electron microscopy. Tannins, which are secondary metabolite phenolic compounds, were found to be deposited conspicuously in vacuoles of certain tissues regardless of their stage in development. However, patterns of deposit accumulation were distinguishable by their cell type during leaf differentiation. The deposits appeared most concentrated in the concentric bundle sheath cells enclosing veins, while little or no density was detected mostly in the mesophyll cells close to the epidermis. An ultrastructural study revealed that the deposits were restricted to the vacuoles at an early stage of leaf development; during which the vacuoles were almost completely filled with the tanniferous substances. The deposits themselves took different forms ranging from granules to huge globules while expanding leaf blade. As the leaf matured, the deposits accumulated either centripetally adjacent to the inner tangential tonoplast or by penetration into the cytoplasm amongst various cellular organelles, resulting in an extremely dense cytoplasm. Electron micrographs frequently showed the delineation of each organelle by the presence of dense deposits within the cytoplasm. Some large depository vacuoles filled with tannins had a corrugated appearance on the sectioned surface. The pattern and potential role of the deposits have been discussed.

• Applied Microscopy
• /
• v.38 no.3
• /
• pp.259-264
• /
• 2008

The stabilized $ClO_2$ gas has been used for many years by the food industry as a strong oxidizing and sanitizing agent that has broad and high biocidal effectiveness. Therefore, "stabilized $ClO_2$" gas may be used in fields of disinfectant and sterilization. But, there have been few studies on the decomposition-inhibition effect of stabilized $ClO_2$ gas with passage of time. The main purpose of this study was to examine the decomposition-inhibition effect of stabilized $ClO_2$ gas and the morphological change of kidney by measuring of the light and electron microscope. Sprague-Dawley (SD) rats weighting from 230 gm to 250 gm were used as experimental animals. Under ether anesthesia, the right kidney of rat was obtained. Put each sample in $37^{\circ}C$ and humidity $80{\pm}5%$ incubator, we obtained each sample after 0 day, 1 day, 2 days, 3 days, 4 days and 5 days. We proceeded the observation of light and electron microscope. The results obtained in this study reveal that stabilized $ClO_2$ gas is an effective decomposition inhibitor until 2 days that was conducted at $37^{\circ}C$ and humidity $80{\pm}5%$ conditions.

• Journal of the Korean Institute of Gas
• /
• v.21 no.1
• /
• pp.87-93
• /
• 2017

This study was conducted to analyze thermal effects for the structure of portable butane gas stoves in accordance with the introduction of safety standard to protect gas accidents that were caused by using oversized grills. The temperatures of oversized grill, cartridge and cover of cartridge coupling part were measured with stoves that heat sink was installed the inside of cover of cartridge coupling part and had different height of tripods. The trend of measured temperatures affected by thermal effects of grill and flame was analyzed. The condition of using portable butane gas stove safely is that the distance between grill and cover of cartridge coupling part should be about 28 mm and over. In contrast, when the distance between grill and cover of cartridge coupling part would be shorter, thermal effects of not only grill but also flame could affect the cartridge directly. In this case, the danger that could cause gas accident would be higher. When heat sink was installed the inside of cover of cartridge coupling part, it was effective on reducing of thermal effects. However, it still had the danger of explosive gas accident of cartridge due to overheating.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.1
• /
• pp.52-57
• /
• 2018

This paper presents the design and cold flow test results of oxidizer-rich preburner injectors for a 9 tonf-class staged combustion engine cycle. Three types of coaxial swirl injectors were designed, and 12 injectors were designed for each type. The diameters of the fuel tangential holes are identical. The diameters of the oxidizer tangential holes were varied to investigate the influence of combustion in the oxidizer-rich preburner according to the momentum ratio of the gas oxidizer generated from combustion in the injector chamber and liquid oxidizer through the cooling channel. It will be verified through a powerpack and combustion test using an oxidizer-rich preburner. In the cold flow test, the fuel flow rate and oxidizer tangential hole flow rate reached the target value based on the designed differential pressure.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2002.11a
• /
• pp.154-154
• /
• 2002