• Journal of the Korea Organic Resources Recycling Association
• /
• v.29 no.1
• /
• pp.5-17
• /
• 2021

This study is a literature review on the recovering phosphorus from Incinerated Sewage Sludge Ash(ISSA), which has relatively high content of phosphorus. Experimental conditions and influencing factors related to the recovery of P and removal of heavy metals by wet and thermochemical methods were discussed. For the practical application of the recovery of P from ISSA, an integrated process linked to incineration facilities is required in terms of economy from the perspective of the entire system including disposal of wastewater and residues generated during the recovery process, and minimizing added chemicals and energy consumption.

• Journal of the Korea Concrete Institute
• /
• v.13 no.2
• /
• pp.114-122
• /
• 2001

The purpose of this study was to manufacture sintered lightweight aggregate using paper sludge ash and to evaluate the qualities of the aggregate according to various mix proportions, conditions of pelletization and sintering. The paper sludge ash alone, due to its mineral and chemical compositions could not gain suitable expansion and strength. Hence, it was essential to add mineral additives such as clay, fly ash etc. The optimum muting ratio range determined in this study is as follows , paper sludge ash 30∼50 %, clay 30∼50 %, fay ash 0∼40 %, Paper sludge 0∼10% and hematite 2∼3 %(for manufacturing lightweight aggregate both for non-structural and structural concrete). It was possible to manufacture various lightweight aggregate whose dry specific gravity ranged about from 0.6 to 1.4 by using this optimum mixing ratio. From the test results of the qualities of aggregate, it showed that the 10% granules crushing value test and water absorption percentage ranged about 5∼10 ton and 10∼20%. Thus, it was favorably comparable to those of the imported aggregate. The manufactured lightweight aggregate could be used for structural concrete and non-structural concrete.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2001.11a
• /
• pp.151-152
• /
• 2001

본 연구는 하수슬러지 소각재를 이용하여 건축재료로서의 응용 가능성을 조사하였다. 소각재를 주성분으로 하여 $950^{\circ}C$에서 소성한 시편과 보통 포틀랜드 시멘트 (OPC)를 첨가하여 습윤양생을 한 시편을 제작하여 압축 강도를 비교하였다. 소성 시편에서는 전반적으로 압축강도가 150 kgㆍf/$\textrm{cm}^2$ 이상의 높은 강도를 얻을 수 있었으나 변형율이 증가하는 것이 단점으로 나타났다. 또한, 습윤양생한 시편의 경우 소량의 OPC 첨가 만으로도 일정한 압축강도를 유지할수 있었으며, 시편의 변형 또한 줄일 수 있었다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.3
• /
• pp.91-99
• /
• 2009

This research were performed to evaluate co-incineration characteristics of sewage sludge and industrial waste in rotary kiln incinerator, and provide the fundamental data. Plastic portion (42.55%) in this industrial waste showed over 3 times higher than that (11.92%) of paper. Korean proximate analysis of the waste mixed with sewage sludge and industrial waste (3 : 7, volumetric basis) showed 16.3% of moisture, 70.5% of volatile solids, and 13.2% of ash, respectively. Low heating value of the mixed waste was 4,513kcal/kg. So it was thought that the mixed waste of sewage sludge and industrial waste (containing 43% of plastics and 12% papers) has enough heating value for co-incineration. The incineration of mixed waste showed the lowest SOx and NOx concentrations at $700^{\circ}C$. However, the operation at $950^{\circ}C$ was feasible in considering dioxin and the other hazardous gases. It was concluded that use of $Ca(OH)_2$ should be under investigation for the operation at $950^{\circ}C$.

• Resources Recycling
• /
• v.17 no.3
• /
• pp.3-9
• /
• 2008

The measurement of physicochemical properties and chemical composition of SSA(sewage sludge ash) has been carried out and the preparation of lightweight material has also been performed using SSA for reuse as building or construction materials. For this aim, lightweight material has been prepared by forming the mixture of SSA, lightweight filler and inorganic binder followed by calcination at elevated temperature and characterized in terms of density and compressive strength. The pH of fly ash was found to be slightly alkaline, pH 8.69, due to the addition of caustic soda in order to neutralize the acidic gas while the pH of bottom ash was 6.48 Heavy metal leachability based on the standard leach test was also found to be below the detection limit for Cd, Cu, Pb, As and Cr of SSA. As far as the compressive strength of lightweight material was concerned, the compressive strength of lightweight material using fly ash was higher than that of lightweight material using bottom ash.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.28 no.3
• /
• pp.15-26
• /
• 2020

To recover phosphorus from incinerated sewage sludge ash(ISSA), ISSA were extracted with sulfuric acid solution, and the optimal phosphorus recovery conditions were experimented by comparing the recovered phosphorus contents and heavy metals by raising pH. Also the phosphorus recovery efficiency was compared when acid extract was reused or classified by particle size of ISSA. The optimal conditions for recovering phosphorus from ISSA were 1N sulfuric acid solution with an L/S ratio of 10, and an extraction time of 30 minutes. Considering the addition of alkali substances and the content of heavy metals in the recovered sediment, it is concluded to recover phosphorus under pH 5. Reuse of the ISSA extract increased the recovery rate of phosphorus by 14~21% depending on the reuse rate (100 and 50%), but it also increased zinc contents to 33 and 21%, and copper contents to 35 and 20%, respectively. The experiment of ISSA divided into four sections by particle size showed that there was no distinct advantage of phosphorous recovery by classification of certain particle size of ISSA. The removal of heavy metals from extracts through EDTA and cation exchange resin showed no definite effect.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2003.05a
• /
• pp.557-562
• /
• 2003

산업체 소각로의 고온 배가스에는 소각물질의 특성에 따라 다양한 성분의 오염물질이 함유되어 있다. 고온 소각배가스의 후처리를 위하여 배가스냉각용 열교환기가 사용되고 있다. 그러나, 소각로 열교환기의 입구와 전열면에 파울링 현상이 발생하여 열교환기의 전열성능이 감소하고 또한 심한 경우, 유로면적이 줄어들어 통풍저항이 증대된다.(중략)

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.55-62
• /
• 2010

This is an experimental research in order to judge the applicability of sewage sludge incineration ash having applied the mixing proportion needed to manufacture bricks and to do plaster work with addition of hwangtoh and slaked lime as a part of the methods for utilizing the wastes produced from sewage sludge incineration ash. Based on the results from experiment and analysis, it is judged that, in case of mixing proportion of 1:2 for the purpose of plastering and masonry work, the cement mortar produced by using a 10% addition ratio of sewage sludge incineration ash with mixture of hwangtoh covering all range of addition ratio, and also the cement mortar produced by using a 20% of sewage sludge incineration ash together with 0% and 10% addition ratio of hwangtoh, was possible to be applied to the practical use. In case of mixing proportion of 1:7 for manufacture of bricks and blocks, if such brick and block products are produced with 10% and 20% addition ratio of sewage sludge incineration ash having added aggregate fines or stone dust that has been actually used in brick and block manufacturing, it is judged that these bricks and blocks could be practically used in the job sites, although strength development is a little bit lower.

• Journal of the KSME
• /
• v.35 no.7
• /
• pp.620-637
• /
• 1995

이 글에서는 유동층소각로와 관련된 기술적 사항을 정리하고자 한다. 일부 교과서적인 내용이 서술되어 있으나, 자세한 이론적 고찰보다는 현상적인 이해에 중점을 두고, 실제 유동층 소각로와 관련된 분야에서 연구를 수행하는 연구자들과의 토론 및 설계시 고려하여야 할 사항들을 간략히 포함한다. 일반적으로 유동층은 효울적인 화학반응로로서 주로 이용되고 있으나, 이 글에서는 환경 및 에너지분야와 일정한 관계가 있는 폐기물 소각로 및 석탄연소로로서의 유동층의 응용에 초점을 맞추고 있다. 우선 환경 및 에너지산업의 현황을 이해함으로써 유동층의 핵심적 역할 담당 가능성을 밝힌다. 그리고 소각로의 종류 및 유동층의 역사와 응용에 대하여 각략히 설명 한다. 여타의 소각로와는 다른 특성인 기포유동특성 및 유동화에 대하여 논함으로써 유동층에 대한 기본현상을 파악한다. 유동층 소각로의 중요한 기능인 공해물질의 노내처리에 대하여 논 의하고, 기포유동층보다 효율적인 순환유동층 및 가압유동층의 특성과 역할을 소개한다. 그리고 유동층 소각로의 예로 일본의 폐기물소각로 및 하수슬러지 소각로개발 현황을 소개한다. 최종 적으로는 유동장 소각로의 실제 설계과장에 대하여 간략히 해설한다.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2000.05a
• /
• pp.259-260
• /
• 2000

충남 지역에서 발생되는 하수 슬러지의 물리$\cdot$화학적 특성을 고려하여 적정 처분 방안을 검토하기 위하여 중금속 및 비휘발성 고형물 분석을 수행하였다. 충남 지역에서 발생되는 하수 슬러지의 중금속 함유량은 기준치 이하로서 다소 안전하다 할 수 있으나 지속적인 관리가 요구되며, 이러한 중금속의 함유량도 타폐기물과의 혼합으로 희석효과를 가질 수 있을 것으로 사료된다. 또, 하수 슬러지의 광물 낙석 결과 하수 슬러지의 비휘발성 고형분의 성분은 시멘트 원료로 쓰이는 점토질과 유사하며 소각후에 연소재를 이용한 경량 골재 및 다른 2차 제품의 제조 가능성이 높은 것으로 판단된다.