• Journal of the Korea Convergence Society
• /
• v.8 no.2
• /
• pp.157-162
• /
• 2017

Inorganic stiffening agents were prepared by mixing paper sludge incineration ash, blast furnace slag fine powder quicklime, anhydrous gypsum and fly ash. The main components of the solidifying agent developed for sludge treatment were SiO, $Al_2O_3$, $TiO_2$, $Fe_2O_3$, $Mn_2O_3$, CaO, MgO, $Na_2O$, $K_2O$, $P_2O$, and $SO_3$. Unlike cement, the developed solidifying agent did not contain $Cr^{6+}$, which is known as a carcinogen. Heavy metals and oil contaminated soil were mixed with solidifying agent and cured for 7 days and the heavy metal content was below the environmental standard. Sewage sludge cake, food waste and solidifying agent were mixed with each other, and after 7 days curing, soil component test showed that the heavy metal content was below the environmental standard. After mixing the sludge, solidifying agent and additive mixture into the beaker, the ammonia concentration was measured to be 0 after 3 days.

• Resources Recycling
• /
• v.16 no.2 s.76
• /
• pp.40-47
• /
• 2007

This paper described recycling of the bottom ash, sourced from the local incinerators as a fine sand for concrete. 10% bottom ash was substituted for the ordinary beach sand in the mortar(on a weigh basis), in conjunction with the pozzolznic diatomite. The specimens were tested according to KS L 5105 and analysed by TCLP(Toxic Chemical Leaching Procedure). The results showed that the hazardous heavy metals in the bottom ash are within the maximum permissible limit of TCLP. The compressive strength of the mortar with 10% bottom ash was highly improved, compared to the control mortar when the pozzolanic diatomite was used. It revealed that the hazardous heavy metals of the mortar with 10% bottom ash were leached within the maximum permissible limit of TCLP. It was concluded that the bottom ash can be reused as a fine sand for concrete when the pozzolanic diatomite was used as a stabilizer.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.103-106
• /
• 2014

Recycling of bottom ash from municipal solid waste (MSW) incinerator has been strictly limited due to its composition of high level chlorine and other unfavorable substances. The composition of MSW has been, however, changed after the introduction of garbage-bag sales system, extended producer responsibility (EPR) policy and the prohibition of direct landfill of food waste. Recent waste shows reduced moisture and chlorine content, increased calorific value due to the separation of food waste, incombustible materials and PVC. The main purpose of this study is to investigate the trend of composition changes of MSW incinerator bottom ash and to compare the analytical results with those before the separation system was introduced. CaO content of bottom ash, one of the major component of cement clinker, increased from 26.7% in 2001 to 34.0% in 2006. The chlorine content showed a dramatic decrease from 1.84% in 2001 to 0.00655% in 2006, which is closely compatible with that of the fly ash of coal-utilizing thermal power plants, which is mainly due to the changes of MSW composition. It is eventually considered that there is a possibility of utilizing the incinerator bottom ash as a raw material of cement clinker feed substances.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.1173-1174
• /
• 2004

• Environmental Analysis Health and Toxicology
• /
• v.19 no.1
• /
• pp.1-24
• /
• 2004

Since dioxins became a serious concern in Korea, a significant number of investigations have been conducted to address diverse issues related to dioxins. However, the results have not been organized for ready access and use. The principal purposes of the work were to ⅰ) provide an archive of dioxin researches in Korea and ⅱ) give an overview of dioxin contamination. The focus of this work was placed on the contamination levels and characteristics concerning the waste incinerators emissions, environmental media, and biological samples(fishes/shellfishes, foods, and human body). Principal component analysis was conducted to identify common and/or unique features and the important variables associated with the congener patterns. From a comprehensive search of academic journals, research and monitoring project reports, dissertations, and periodicals of other forms, a total of 115 counts were found that met the purposes of this study. The contamination levels of various samples were summarized and compared to those reported in foreign literatures. The congener patterns varied largely with environmental media and distinguished particularly by OCDD, 1,2,3,4,6,7,8-HpCDF, and OCDF for the samples within the same media. The proximity to emission sources differentiated the congener patterns in air and soil samples by the fraction of OCDD.

• Analytical Science and Technology
• /
• v.16 no.5
• /
• pp.418-425
• /
• 2003

Inorganic elemental content of bottom ash generated from municipal solid waste incinerator was determined by neutron activation analysis. Bottom ash samples were collected monthly from incinerator located in city D, strained out by the 5 mm sieve, dried by oven and pulverized by agate mortar. The samples were irradiated at NAA #1 irradiation hole in HANARO research reactor of Korea Atomic Energy Research Institute and the irradiated samples were measured by HPGe-gamma-ray spectrometer. From the activity of measured nuclides, 33 elements including As, Cr, Cu, Fe, Mn, Sb and Zn were determined applying activity creation formula and nuclear data. The quality control was conducted by simultaneous analysis with NIST standard reference materials.

• Resources Recycling
• /
• v.17 no.4
• /
• pp.10-20
• /
• 2008

This study was intended to use an incinerated paper mill sludge ash as cement alternatives in order to derive a method of utilizing the incinerated paper mill sludge ash of low utilization rate in large quantities. Also, the utilization possibility of incinerated paper mill sludge ash as the cement alternative was examined by mixing a polypropylene fiber and cellulose fiber and by considering its control effect for shrinkage cracks caused by an increase of absorption rate and hydration heat, as a weakness shown at the alternation of incinerated paper mill sludge ash.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1634-1642
• /
• 2009

본 연구는 자체재질로 복합재 적용한 경우를 기존의 금속구조 차체와 25년 운행기간을 기준으로 환경영향을 비교평가하였다. 본 연구는 알루미늄, 스틸, 하이브리드 복합재, 전체 복합재 인 종 4종의 자체를 고려하였다 네가지 차체 시나리오에 대해 원자재 생산, 차체 제작, 25년 사용 단계, 폐기까지의 환경영향에 대해 LCA 기법을 사용하여 평가하였다. 모든 시나리오 경우, 사용단계가 환경영향 카테고리를 좌우했다. 전제 복합재 시나리오가 매립 또는 소각에 대한 가장 낮은 영향을 주었다. 복합재 차체는 금속자제와 비교해 환경영향 측면에서 30$\sim$50 % 개선효과를 보였다.

• Analytical Science and Technology
• /
• v.14 no.3
• /
• pp.253-258
• /
• 2001

This is a research on hazardous characteristics and potentials of bottom ash from 9 municipal solid waste combustors(200 tons/day) of Korea by the test methods of leaching and content. The leaching method was performed by Waste Test Method of Korea. In case of the content method, mercury was determined by thermal decomposition amalgamation atomic absorption spectrometer, other 9 elemets including Pb, which were pretreated by U.S.EPA SW-846 3050B method, were determined by flame atomic absorption spectrometer(FAAS) or inductively coupled plasma atomic emission spectrometer(ICP-AES). Results of leaching test showed that Pb and Cu was main pollutants. It was interested that the distribution rate of metals' contents of each combustors was similar and the rank of concentration was Fe>Zn>Cu>Mn>Pb>Cr>As>Cd>Hg.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.559-564
• /
• 2024

Since the era of industrial revolution, the waste volume has continued to grow; waste management has thus become one of the major global environmental challenges facing humanities today. Waste treatment and management issues trigger NIMBY movements, and disputes among states, governments, and social actors over the issues have been accelrating. At the level of states and sub-states, various measures including institutions, laws, regulations, market-oriented methods, consensus and collaborative governance have been introduced to address various problems associated with waste. More recently, science and technology has been applied to the waste treatment and management under the notion of circular economy. However, societal support for addressing waste problems still remains inadequate, calling for new approaches and alternative pathways. In this context, this study examines two cases of urban incineration plants designed by Hudertwasser, Austria-born artist and architect: Spittelau, Austria, and Osaka, Japan. Through these case studies, I demonstrate how creative and innovative culture-technology convergence can shed new light on challenging environmental issues such as an urban waste problem.