• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.4
• /
• pp.256-262
• /
• 2009

The use of hydrodynamic separator is becoming increasingly popular for suspended solids reduction in urban storm runoff. This study is a laboratory investigation of the use of Vortex Screen to reduce the solids concentration of synthesized storm runoff. The synthesized storm runoff was made with water and addition of particles; manhole sediment, road sediment, fly ash, and ployvinyl chloride powder. Vortex Screen was made of acryl resin with 250 mm of diameter and height of 700 mm. To determine the removal efficiency for various influent concentrations of suspended solids (SS) and chemical oxygen demand (COD), tests were performed with different operational conditions. The samples were taken simultaneously at the influent storage tank and effluent tank, and measured SS and COD concentrations. The ranges of surface loading rate were 110 to 1,550 $m^3/m^2$/day, and influent SS concentrations were varied from 141 to 1,986 mg/L. This paper was intended to evaluate the effect of inlet baffle and the ratio of underflow to overflow ($Q_U/Q_O$) on particle separation efficiency for various particle size using Vortex Screen. It was found that when increase of $Q_U/Q_O$ from 10% to 20%, SS removal efficiency was increased about 6%. The range of SS and COD removal efficiencies of road sediment particle size 125<$d_p$<300 ${\mu}m$ were 68.0~81.0%, 53.1~71.9%, respectively. Results showed that SS removal efficiency with inlet baffle improved by about 10~20% compared without inlet baffle.

• Journal of the Korean earth science society
• /
• v.36 no.1
• /
• pp.36-50
• /
• 2015

The purpose of this study is to assign emission source profiles of volatile organic compounds (VOCs) and particulate matters (PMs) for chemical speciation, and to correct the temporal allocation factor and the chemical speciation of source profiles according to the source classification code within the sparse matrix operator kernel emission system (SMOKE) in the Seoul metropolitan area. The chemical speciation from the source profiles of VOCs such as gasoline, diesel vapor, coating, dry cleaning and LPG include 12 and 34 species for the carbon bond IV (CBIV) chemical mechanism and the statewide air pollution research center 99 (SAPRC99) chemical mechanism, respectively. Also, the chemical speciation of PM2.5 such as soil, road dust, gasoline and diesel vehicles, industrial source, municipal incinerator, coal fired, power plant, biomass burning and marine was allocated to 5 species of fine PM, organic carbon, elementary carbon, $NO_3{^-}$, and $SO_4{^2-}$. In addition, temporal profiles for point and line sources were obtained by using the stack telemetry system (TMS) and hourly traffic flows in the Seoul metropolitan area for 2007. In particular, the temporal allocation factor for the ozone modeling at point sources was estimated based on $NO_X$ emission inventories of the stack TMS data.

• Korean Journal of Environmental Agriculture
• /
• v.28 no.2
• /
• pp.209-220
• /
• 2009

Octachlorostyrene(OCS) has been persisted in environment because it has not been decomposed easily. And, it has been known as highly toxic compounds to the environment and human as well as accumulated as high concentrations in a biota through a food chain. Therefore, OCS was monitored for water, soil and fish sampled from the areas where were able to be contaminated with OCS. The recoveries of octachlorostyrene were 93.1${\sim}$98.6% in water, 90.4${\sim}$94.8% in soil and 81.5${\sim}$90.2% in fish and detection limits were 0.0004 mg $L^{-1}$ for water, and 0.002 mg $kg^{-1}$ for soil and fish, respectively. OCS was not detected in water, sediment, soil and fish samples from Ulsan, Yeosu, Daejeon and Sihwa industrial complex and in soil sampled nearby incineration plants in all parts of the country. Accordingly, we estimated that there is no risk from exposure of OCS.

• Journal of The Korean Association For Science Education
• /
• v.19 no.1
• /
• pp.1-7
• /
• 1999

The purpose of this study was to survey the high school students' concern levels on decision-making problems based on biology, This study is a exploratory research to develop teaching strategies and curriculum of the common science for the enhancement of the students' decision-making ability in problems involved biological knowledges. The survey subjects were 101 first graders of the high school in Seoul area. The survey instrument developed was 5-point scale of Likert type consisted of 24 question items. The survey results showed that the concern level on selection of method for learning was the highest. The concern levels on selection of method for sports or diet which are the individual faced problems were high, and concern levels on the problems social issued such as decisions about standard for noise, pros and cons of approval for brain death or artificial abortion were high, too. The students' concern levels on problems individual context were significantly higher than concern levels on problems social context (p<0.01). The males' concern levels were higher than females' on 'AIDS', 'incinerator for rubbish', 'atomic power plant', 'protection policy for decreasing species', 'standard for noise' (p<0.05), And the males' concern levels were higher than females' on domain of 'ecosystem and environment pollution'. But the females had higher concern levels than males on 'diet' and 'surrogate mother' (p<0.05). The analyzed results were discussed in respects of implication for teaching strategies and curriculum.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.1
• /
• pp.11-17
• /
• 2005

Na-A zeolite were synthesized from melting slag of the incinerated ash by the alkaline activation processes. The experiments were performed in stainless steel vessels, with continuous stirring during the reaction periods. The silica-rich solution, a starting material, which was the waste of crystal growth factory, contains 5.7 wt% SiO₂ and 3.2 wt% Na₂O. And NaAlO₂ was made by the reaction of aluminium dross and NaOH solution and its molar ratios were Na₂O/Al₂O₃= 1.2 and H₂O/Na₂O=9. During the residence time of 7∼8 h at 80℃, the mixing of the silica-rich solution, NaAlO₂ and melting slag yields the production of homogeneous Na-A zeolite. The optimal reactant composition in molar ratio of Na₂O:Al₂O₃:SiO₂ was 1.3∼l.4 : 0.8∼0.9 : 2 and mixing ratio of solution and slag was 1/7∼10 (g/cc). Synthesized Na-A zeolite has cubic form uniformly and its size ranges about 1 ㎛. Ca/sup 2+/ ion exchange capacity of the Na-A was about 180∼210 meq/100g, corresponding approximately 80% to the commercial detergent builder.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1291-1295
• /
• 2005

제천, 충주, 단양의 3 개 지자체에 걸쳐 있는 충주호는 매년 여름철 집중호우시 부유쓰레기가 $3,000\~45,000\;m^3$ 의 범위에서 반복하여 발생하고 있으며 이들 대부분은 제천시 관내에서 수거되고 있다. 현재 부유쓰레기의 수거 및 육상 집하는 수자원공사가 담당하고 있으며 제천시는 이를 폐기물 매립장으로 운반하여 매립하고 있다. 이러한 부유쓰레기는 무게로는 그리 많지 않으나 부피가 매우 커 운반시 수거 차량의 운행대수가 많아지고 매립지 용량을 크게 소모하는 등 쓰레기 처리과정상의 문제점을 발생시키고 있으며 특히 부유쓰레기의 발생은 1 회성이 아니라 매년 장마와 홍수가 발생하면 되풀이되는 현상으로, 수자원 확보 및 홍수조절을 위해 설치된 댐에 의해 집중호우시 발생된 부유쓰레기가 댐 수위가 낮아짐에 따라 댐 주변부에 잔류하게 되어 수자원 및 수질 관리에 큰 어려움을 발생시키고 있다. 이러한 부유쓰레기는 댐 상류지역에 방치된 쓰레기들이 강우시 지표류와 함께 떠내려 온 것들로서 발생원인의 완전 제거는 불가능한 실정이므로 발생된 부유쓰레기를 최대한 신속히 수거하고 수거된 쓰레기는 소각이나 톱밥 생산 등의 물질자원화 방법으로 매립 양을 최소화 할 필요가 있다. 이에 본 연구에서는 충주댐에서 매년 집중호수시 발생하는 부유쓰레기의 발생 및 수거, 처리실태를 조사하며 또한 제천관내에 부유 쓰레기의 집중되는 원인을 분석하고 이로부터 적절한 부유쓰레기 관리대책을 수립하고자 하였다. 충주댐 부유물 발생 현황 조사 및 처리대책에 관한 연구결과는 다음과 같다. 부유쓰레기 발생량은 태풍의 발생에 따라 급격히 증가하여 년간 $12,587m^3\~45,356m^3$ 이 발생하고 있었다. 댐 및 하천 흐름 해석을 위해 2 차원 동수역학 모델인 RMA2 모형을 이용하여 충주댐에서의 물의 흐름을 해석한 결과 옥순대교$\~$청풍대교 구간 사이에 댐 및 지형적 영향으로 인해 잘 발달된 와류가 하도 전체를 통하여 발생되고 있었고 이는 댐 부유물 정체현상이 나타나는 지점과 잘 일치하고 있었다.

• Korean Journal of Environmental Biology
• /
• v.22 no.1
• /
• pp.220-226
• /
• 2004

The restoration effects in two sorts of forests created and managed on the bases of ecological principles in Sihwa industrial complex and Mt. Surak respectively were evaluated in both viewpoints of species composition and diversity. Species composition of the forests created based on the ecological design was move similar to that of the natural forests compared wit h the forests constructed by applying the landscape architectural method. The increased species diversity in the ecologically created forest reflected the effect as well. Black locust plantation managed by applying the ecological principle showed move similar species composition to the surrounding natural forest than the forest left without any management. Furthermore, the former forest showed higher species diversity than the latter one. The methods, which create and manage a forest based on ecological principles, revealed several problems, such as lack of specialty of project operators and inspecting officers, construction regulations without the ecological background, absence of the endemic young trees to be introduced in diverse natural environment, etc. Preparation of guidance for ecological planting and systematic environmental education including revision of construction regulation were recommended as the measures to solve such problems.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.3
• /
• pp.27-33
• /
• 2004

The catalytic effect of waterworks sludge on NOx removal in $BaTiO_3$pellets and sludge pellets combined packed-bed plasma reactor with plate-plate electrode geometry is measured for the various conditions. NOx removal rate is about 90[%] at $BaTiO_3$-sludge combined reactor used fresh sludge. $NO_2$ and $O_3$ as byproducts are significantly generated in only $BaTiO_3$ packed-bed plasma reactor, however, in $BaTiO_3$-sludge combined packed-bed reactor, $NO_2$ and $O_3$ are completely removed while $CO_2$ as by-products are observed from FTIR spectra. $NO_2$ and $O_3$ seem to react with metallic molecules, metal oxide, and organic compounds that are generally chlorophyll included in sludge. NOx removal rate increases with $O_2$ concentration increasing. Removal rates $NO_2$ and $O_3$ are independent of operating time and repetition measurement times.

• Journal of Energy Engineering
• /
• v.18 no.4
• /
• pp.221-229
• /
• 2009

This study develops the optimized operation program which enables effective and economic operation between individual and connected branch offices by analyzing the current status and influential indicators of district heating companies' capital branch offices. Accordingly, the study examines the efficiency of optimized operation program. In doing so, this study has diagnosed and analyzed various factors, such as boilers, pumps, and relevant tags (temperature, pressure, fuel amount) through investigation of individual branch offices, and finally succeeded in developing wide-ranging data base by factor covering one-year time period. Additionally, after running the optimized operation program, different branch offices, optimum preference has turned out "incinerator receiving heat from KEPCO>CHP >PLBs>PLBw." Meantime, except the connected offices, there has been no big difference between actual and optimum operation program in branch offices. Meanwhile, the integrated optimum operation program has made it possible the most optimal result only via the connecting supply and demand heat without changing received Heat from KEPCO which is the same as total productive heat. The result has showed that the reduction percentage per day is 2.45~6.80%, and the reduction cost per day is 22,727~60,077 thousand won given the randomly selected sample days. In particular, winter time shows the highest demand with the largest reduction cost whereas summer time illustrates the lowest demand with the smallest reduction cost. Given this result, reduction cost per year compared to actual heat production cost for one year theoretically would be 84 hundred million won. Also, the economic effect showed that the reduction cost percentage per year is more than 2.74% on heat production cost per year for all capital branch offices.

• Clean Technology
• /
• v.27 no.4
• /
• pp.332-340
• /
• 2021

With the recent reinforcement of emission standards, it is necessary to make efforts to reduce NOx from air pollutant-emitting workplaces. The NOx reduction method mainly used in industrial facilities is selective catalytic reduction (SCR), and the most commercial SCR catalyst is the ceramic honeycomb catalyst. This study was carried out to reduce the NOx emitted from steel plants by applying De-NOx catalyst coated on metallic monolith. The De-NOx catalyst was synthesized through the optimized coating technique, and the coated catalyst was uniformly and strongly adhered onto the surface of the metallic monolith according to the air jet erosion and bending test. Due to the good thermal conductivity of metallic monolith, the De-NOx catalyst coated on metallic monolith showed good De-NOx efficiency at low temperatures (200 ~ 250 ℃). In addition, the optimal amount of catalyst coating on the metallic monolith surface was confirmed for the design of an economical catalyst. Based on these results, the De-NOx catalyst of commercial grade size was tested in a semi-pilot De-NOx performance facility under a simulated gas similar to the exhaust gas emitted from a steel plant. Even at a low temperature (200 ℃), it showed excellent performance satisfying the emission standard (less than 60 ppm). Therefore, the De-NOx catalyst coated metallic monolith has good physical and chemical properties and showed a good De-NOx efficiency even with the minimum amount of catalyst. Additionally, it was possible to compact and downsize the SCR reactor through the application of a high-density cell. Therefore, we suggest that the proposed De-NOx catalyst coated metallic monolith may be a good alternative De-NOx catalyst for industrial uses such as steel plants, thermal power plants, incineration plants ships, and construction machinery.