• Membrane Journal
• /
• v.14 no.4
• /
• pp.298-303
• /
• 2004

PTMSP/PDMS-PEI composite membrane was prepared by solution casting method. To investigate the characteristics of this membrane, the analytical methods such as FT-IR, $^1$H-NMR, DSC, TGA, GPC, and SEM have been utilized. The number-average((equation omitted)) and weight-average((equation omitted)) molecular weight of PTMSP/PDMS copolymer were 501,516 and 675,560 respectively. The separation of the gas mixture($H_2$/$N_2$) through the composite membrane was studied as a function of pressure. The separation factor($\alpha$, $\beta$, (equation omitted)) of the composite membrane used in this work increased as the pressure of permeation cell increased. The real separation factor($\alpha$), head separation factor($\beta$), and tail separation factor ((equation omitted)) of PTMSP/PDMS-PEI composite membrane were 21.50, 49.14 and 1.84 respectively at $\Delta$P 345.55 kPa and $25^{\circ}C$.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.107.1-107.1
• /
• 2011

현재 상용으로 많이 사용되는 p-type 태양전지는 Dopant로 사용된 Boron이 $O_2$와 결합하면서 Light induced degradation이 발생하여 태양 전지 효율의 감소를 불러일으키는 단점이 있다. 이러한 문제를 해결하기 위하여 여러 가지 방법들이 제시되었는데 일반적으로 n-type wafer를 이용함으로써 Light induced degradation을 해결하는 방법이 주로 사용된다. n-type 태양전지를 제조함에 있어서 보다 높은 효율을 달성하기 위하여 태양전지 후면 구조에 local contact 개념을 도입하여 rear local emitter를 형성함으로써 전체적인 효율 증가를 도모하였다. 이러한 local contact을 제조하기 위해서는 전기적으로 구조적으로 고려할 사항들이 여러 가지 존재한다. 따라서 우리는 이러한 고려 사항들을 실험적인 방법으로 결정하는 것이 아니라, 정교한 변수 통제를 이용한 시뮬레이션으로 최종적인 효율 상승을 가져오는 조건을 찾으려고 한다. 이때 사용될 수 있는 시뮬레이션은 여러 가지 종류가 존재하는데 우선 상용 태양전지의 해석에 가장 많이 사용되는 PC1D프로그램이 있다. 그러나 PC1D의 경우에는 1차원의 해석만 가능하기 때문에 local contact의 2차원 이상의 구조 변화에 따른 최종적인 효율을 계산하는데 무리가 따르게 된다. 따라서 2차원 이상의 형상에 대한 분석이 가능한 프로그램을 이용하여 실제 셀에서 일어나는 현상을 더 정밀하게 모사함으로써 local contact에서 일어나는 전기적, 구조적 변화가 최종적인 효율에 어떻게 영향을 미치는지를 파악해볼 것이며, 어떤 구조를 선택하였을 때 가장 높은 효율을 달성할 수 있는지 알아보려고 한다.

• Membrane Journal
• /
• v.13 no.4
• /
• pp.291-299
• /
• 2003

Polymer membranes such as poly(1-trimethylsilyl-1-propyne)-polyetherimide (PTMSP-PEI) and poly(dimethylsiloxane)- polyetherimide (PDMS-PEI) composite membrane were prepared by solution casting method. To investigate the characteristics of these membranes, the analytical methods such as FT-IR, $^1H-NMR,$ DSC, TGA, GPC, and SEM have been utilized. The number-average (equation omitted) and weight-average (equation omitted) molecular weight of PTMSP were 477,920 and 673,329 respectively. The glass transition temperature ($T_g$) of PTMSP was $224^{\circ}C.$ The separation of the gas mixture ($H_2/N_2$) through the composite membranes were studied as a function of pressure. The separation factor (${\alpha}, {\beta},$ quation omitted) of the composite membranes used in this work increased as the pressure of permeation cell increased. The real separation factor (${\alpha}$), head separation factor (${\beta}$), and tail separation factor (equation omitted) of PTMSP-PEI composite membrane were 2.28, 1.17, and 1.96 respectively at ${\Delta}P$ 30psi and $25^{\circ}C.$ (${\alpha}, {\beta}$ and equation omitted of PDMS-PEI composite membrane were 3.70, 1.53, and 2.42 respectively at ${\Delta}P$ 30psi and $25^{\circ}C$.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1991.10a
• /
• pp.261-267
• /
• 1991

다품종소량생산의 특징을 갖고 있는 금형공업에서 컴퓨터통합생산시스템(Computer Integrated Manufacturing System;CIMS)의 실현을 위한 중요한 분야의 하나는 부품설계도면으로부터 최종제품을 생산하는데 필요한 공정계획의 자동화, 즉 컴퓨터를 이용하여 공정계획을 자동적으로 생성하는 자동공정계획시스템(Computer Aided Process Planning;CAPP) 기술의 개발이다. 국내외적으로 CAPP분야의 연구는 컴퓨터 지원에 의한 자동화 기술의 급속한 발전과 더불어 지난 20여년 동안에 기계가공품에 관한 CAPP은 약 150여가지가 개발되었으나, 이는 컴퓨터 지원에 의한 설계의 자동화(Computer Aided Design;CAD)나 컴퓨터 지원에 의한 제조의 자동화(Computer Aided Manufacturing;CAM)분야에 비해 상대적으로 저조한 형편이다. 특히 금형을 대상으로 한 CAPP시스템의 개발은 아직 초기단계에 있기 때문에, 본 연구에서는 사출금형을 대상으로 하여 실용성이 있는 공정설계시스템을 개발함을 목적으로 한다. 일반적으로 공정계획은 "소재로부터 제품을 경제적, 효율적으로 생산하는데 필요한 제조공정의 체계적인 결정"이라고 정의할 수 있다. 공정계획은 제품의 종류와 수량, 재료와 부품의 종류, 보유 생산설비와 제조기술의 수준에 따라 다르나, 공정설계(Process Design)와 작업설계(Operation Design)로 구분할 수 있다. 본 연구에서는 공정계획을 광의의 공정설계로 정의하고, 공정설계와 공정계획을 동의어로 통용토록 한다. 기존의 CAPP시스템의 개발에 관한 기본적인 접근방법은 변성형방법(Variant method), 창성형방법(Generative method) 및 자동화방법(Automatic method)이 있다. 이들 CAPP시스템을 개발할 때 사용하는 기법은 크게 5가지- (1) GT(group Technology) 접근기법, (2) Bottom-up 접근기법, (3) Top-down 접근기법, (4) AI와 전문가시스템(Expert System) 접근기법, (5) 컴퓨터 프로그래밍 언어 - 로 분류할 수 있다. 본 연구에서는 전문가시스템 기법을 도입해서 사출금형 공정계획전문가의 지식과 경험을 획득하여 지식베이스를 구축하고, 전문가시스템 셀(shell)중 CLIPS를 이용하여 자동공정계획시스템인 Mold CAPP을 개발하였다.PP을 개발하였다.

• Korean Journal of Materials Research
• /
• v.11 no.1
• /
• pp.61-66
• /
• 2001

$TiO_2$films for photocatalytic reaction were synthesized by anodizing process. The photocatalytic efficiencies of anodized $TiO_2$were evaluated by the rate of decomposition of aniline blue. The properties of photocatalysis on anodic $TiO_2$films have been observed, but the efficiencies of photocatalytic reaction depended on the conditions of films formation. The microstructure of the anodic film formed in $H_2SO_4$ solution differed from that of $TiO_2$films formed in $H_2SO_4+H_3PO_4$ solution. It has been shown that the appropriate applied-voltage for anodizing of titanium for photocatalysis was 180V in both aqueous solutions.

• Korean Chemical Engineering Research
• /
• v.49 no.1
• /
• pp.10-14
• /
• 2011

The electrode material performances of electric double layer capacitor(EDLC) were investigated using mesopous active carbon fiber(ACF), which was prepared by the iron exchange method. The mesoporous ACF had pore characteristics of specific surface area around 1249, 664 $m^2$/g, mesoporous fraction around 70.6-81.3% and meanpore size around 2.78-4.14 nm. The results showed that as HNO3 treatment time decreased, the specific surface area increased and mesoporous fraction decreased. To investigate electrochemical performance of EDLC, unit cell was manufactured using mesoporus ACF, conducting material and binder; organic elctrolyte was used on this experiment. The specific capacitance of ACF treated with HNO3 for 2 hours turned out to be 0.47 $F/cm^2$and the results of the cyclic charge-discharge tests were stable. Thus, the electrochemical performance of EDLC was mainly dependent on specific surface area of ACF electrode and the diffusion resistance of charge decreased as the mesopore increased.

• Applied Chemistry for Engineering
• /
• v.25 no.6
• /
• pp.592-597
• /
• 2014

The graphite/$SiO_2$ composites as anode materials for lithium-ion batteries were prepared by sol-gel method to improve the graphite's electrochemical characteristics. The prepared graphite/$SiO_2$ composites were analysed by XRD, FE-SEM and EDX. The graphite surface modified by silicon dioxide showed several advantages to stabilize SEI layer. The electrochemical characteristics were investigated for lithium ion battery using graphite/$SiO_2$ as the working electrode and Li metal as the counter electrode. Electrochemical behaviors using organic electrolytes ($LiPF_6$, EC/DMC) were characterized by charge/discharge, cycle, cyclic voltammetry and impedance tests. The lithium ion battery using graphite/$SiO_2$ electrodes had better capacity than that of using graphite electrodes and was able to deliver a discharge capacity with 475 mAh/g at a rate of 0.1 C. Also, the capacity retention ratio of the modified graphite reaches 99% at a rate of 0.8 C.

• Polymer(Korea)
• /
• v.27 no.6
• /
• pp.549-554
• /
• 2003

Emeraldine salt of polyaniline-dodecylbenzenesulfdnic acid (PANI-DBSA) in organic solvents such as toluene and xylene was obtained by a direct one-step emulsion polymerization technique. When the molar ratio of DBSA to aniline monomer was 1.5:1, its solubility and electric property showed a maximum value and then the solid contents of PANI-DBSA was 8 wt% in toluene. The cast film of PANI-DBSA with no binder was obtained on glass or plastic substrates under ambient conditions. PANI solution can be also easily blended with polyurethane and polystyrene polymers in toluene. Improved electrical performance up to 5 S/cm was achieved with good light-transmittance up to 70% at 500 m thickness. They also showed more homogeneous morphology than that prepared with PANI-DBSA kom aqueous dispersion polymerization. The partially dispersed PANI-DBSA showed particles sizes of 50-400 m in organic solvents and their XRD pattern were observed from the powder sample.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.89-94
• /
• 2019

Glass base sealant is required as a ceramic-ceramic joining material between α-alumina insulation cap and β-alumina electrolyte tube in the development of NaS battery cell package for electrical energy storage system. The fabrication of glass frit by thermal quenching method, phase analysis, particle size analysis, coefficient of thermal expansion and surface roughness according to the glass compositions were analyzed for the fabrication of glass sealing paste for ceramic-ceramic joining. Also, a new evaluation method of the adhesion strength of glass sealant at the small area in ceramic-ceramic joining component was proposed using conventional Dage bond tester that was used to measure the adhesion of solder ball joint.

• Journal of the Korean Electrochemical Society
• /
• v.20 no.3
• /
• pp.49-54
• /
• 2017

We develop a ceramic composite separator prepared by coating $ZrO_2$ nanoparticles with a poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP) copolymer on a polyvinyl alcohol (PVA) mechanical support prepared by electrospinning technique to improve thermal properties. The gurley number of the ceramic composite separator shows much lower value than that of a PE separator even though it possesses the polymeric coating layer with ceramic nanoparticles. In addition, the proposed sample shows higher electrolyte uptake than PE separator, leading to enhancing the ionic conductivity of the proposed sample and, by extension, the rate discharge properties of lithium ion batteries. Thermal stability of the ceramic composite separator is dramatically improved without any degradation in electrochemical performance compared to the performance of conventional PE separators.