• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1993.04a
• /
• pp.178-178
• /
• 1993

생리활성 펩타이드류의 경점막 수송을 검토하기 위하여 토끼의 비강, 직장, 질 또는 눈 점막 구출액에서의 메치오닌엔케팔린 (Met-Enk) 및 그 합성 유사체인 [D-알라$^2$]-메치오닌엔케팔린아미드 (YAGFM)의 효소적 분해를 억제하고자 수종 효소억제제를 검토하였다. 방법: 토끼의 질, 직장 및 비강 점막을 차례로 적출하여 신속히 Valia-Chien투과셀에 마운팅하고, 눈의 각막은 절취하여 따로 각막 투과셀에 마운팅한 다음 등장 인산염 완충액 3.5ml씩으로 8시간씩 3회 추출하여 점막측 및 장막측 추출액을 제조하였다. 추출 완료 직후 이들 추출액에 Met-Enk 또는 YAGFM 50$\mu\textrm{g}$/ml의 농도로 첨가하고 여러 효소억제제를 단독 또는 혼합하여 첨가한 조건에서 37$^{\circ}C$에서 60 rpm으로 24시간 동안 흔들면서 경시적으로 시료를 취하여 잔존 펩타이드의 양을 HPLC법으로 정량하여 속도론적으로 비교 검토하였다. 이 연구에 사용한 효소억제제로는 아미노펩티다제의 억제제인 amastatin (AM), bestatin (BS). 엔케팔리나제 A의 억제제로 알려진 thiophan (TP), 엔케팔리나제 B의 억제작용이 있는 것으로 밝혀진 thimerosal (TM), metalloenzyme의 억제제인 에데트산나트륨 (EDTA) 등을 검토하였고 또 $\beta$-시클로덱스트린 유도체인 디메칠-$\beta$-시클로덱스트린과 2-히드록시프로필-$\beta$-시클로덱스트린이 펩타이드의 분해억제효과도 함께 검토하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.396-396
• /
• 2011

유연기판(Flexible) CIGS 박막태양전지는 금속 및 폴리머 기판을 이용하고 roll-to-roll 공정에 적합하기 때문에 유리기판을 이용한 태양전지에 비해 가볍고 공정단가를 절감할 수 있다. 그러나 기존의 soda-lime 유리 기판에 비해 금속 및 폴리머 기판을 사용시 Na 공급의 부재로 CIGS 박막 태양전지는 Voc, FF의 감소로 효율이 감소한다. 본 연구에서는 기존 유리기판과 유사한 Na의 공급을 위해 soda lime 유리 박막(SLGTF)을 Mo 후면전극 증착 전에 도입하였으며, CIGS 박막 및 태양전지를 제조함으로써 SLGTF의 영향을 분석하였다. SLGTF는 rf magnetron 스퍼터링법으로 두께를 조절하여 철강기판과 Mo 사이에 증착하였다. 본 연구에서는 SLGTF의 두께에 따른 CIGS 박막의 미세구조 및 Na 함량의 변화를 기존의 유리기판 및 SLGTF이 없는 철강기판과 비교하여 분석하고자 하였다. CIGS 박막은 3-stage 진공증발법으로 증착하였으며, CIGS 박막의 우선배향성(texture) 변화를 관찰하기 위해 XRD (X-ray Diffraction)를 이용하였고 Na 양을 확인하기 위해 SIMS(Secondary Ion Mass Spectroscopy)를 사용하였다. SLGTF의 도입 및 두께의 변화에 따라 CIGS 박막의 우선배향성(texture) 및 Na의 양에 큰 변화가 있었으며, 이러한 변화가 CIGS 태양전지 셀 효율에 미치는 영향을 분석하였다.

• Polymer(Korea)
• /
• v.30 no.2
• /
• pp.182-186
• /
• 2006

Due to their periodic helical structure, cholesteric liquid crystals (CLC) have a unique ability to selectively reflect light. CLC films reflecting a broad wavelength band were prepared by inducing a pitch gradient in CLC layer through a phase separation. The reflection bandwidth of the CLC cell was broaden as irradiation light intensity decreased and as the amount of the UV absorbing dye increased. Initial reflection bandwidth of 50 nm was broaden to 300 nm Various pitch distributions in the CLC cell was observed using SEM and ATR-IR technique was used to prove that the pitch distributions are induced through the phase separation.

• Membrane Journal
• /
• v.26 no.2
• /
• pp.152-158
• /
• 2016

The Chlor-alkali (CA) membrane cell is a major electrolysis system to produce valued chemicals such as chlorine gas and sodium hydroxide. The CA membrane process has been attracted in the industries, since it has relatively low energy consumption when compared with other CA processes. The key component in CA process is perfluorinated sulfonic acid ionomer membranes, which provide ion-selectivity and barrier properties to produced gases. Unfortunately, there is limited information to determine which factors should be satisfied for CA applications. In this study, the influences of PFSA membranes on CA performances are disclosed. They include ion transport behaviors, gas evolution capability, and chemical/electrochemical resistances under CA operation conditions.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.4
• /
• pp.235-238
• /
• 2007

There is great interest in the applicability of generated hydrogen peroxide to a variety of industrial processes, usually involving oxidation of organics. Hydrogen peroxide is now employed for the bleaching as well as mechanical and chemical treatment in the pulp and paper industries. It addition, it is considered as an agent to displace the traditional alkaline treatments with chlorine-based chemicals. This paper reports a comparative study of $H_2O_2$ electogeneration on gas-diffusion electrode in divided cell with several $Nafion^{(R)}$ proton-exchange membranes, Russian cation-exchange membrane MK-40 and SPEEK membrane. The influence of different PEMs on electro-chemical cell voltage, current efficiency and energy consumption of hydrogen peroxide generation has been studied.

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.648-653
• /
• 1998

This study examines the effects of cell size and structure on the oil adsorption by polyurethane (PU) foam. A series of oil-adsorptive PU foam has been prepared, using various molecular weight of polyether polyol (GP-1000, GP-3000, GP-4000, GP-5000), together with TDI-80, water and additives. It was found that the cell size of PU foam decreased with increasing the agitation speed and surfactant content. Oil-adsotption of PU foam increased over 2000% with the increase of molecular weight of polyol and with the decrease of cell size. Increase in the surfactant content and the viscosity of adsorbed oil also give a remarkable decrease in oil adsorption.

• Resources Recycling
• /
• v.20 no.6
• /
• pp.50-55
• /
• 2011

Using ultrasonic irradiation, the separation and recovery of PV cell, made of silicon wafer, from PV module was carried out through selective decomposition of EVA used as an interlaminated binder. The ultrasonic cleaner of bath-type (Output: 130 W, Frequency: 40 kHz) was used as an ultrasonic apparatus in this research. With the fixed distance of 2 cm, from ultrasonic generator to PV cell, the experiment of EVA decomposition was performed in various organic solvents such as Toluene, Trichloroethylene, O-dichlorobenzene, Benzene. And also their concentrations and temperature was changed to survey the optimum conditions. However EVA can be decomposed perfectly at $55^{\circ}C$ within 160 min in 5 M of all kinds of solvent, PV cell may be recovered with being damaged or broken severely. This damage may be resulted from the swelling of EVA in the process of decomposition. Whereas, at the condition of 5 M at $65^{\circ}C$, PV cell can be recovered with the state of minor damage or crack. This implies that the decomposition rate of EVA increases with an increase of temperature, thereby EVA can be decomposed before the swelling of EVA layer. Conclusively, it is possible for PV cell to be recovered within 40 min, at $65^{\circ}C$ in 5 M, with less damage.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.685-693
• /
• 2013

The foams of a poly(lactic acid) modified by the reactive compounding were produced with the batch foaming technique using supercritical $CO_2(scCO_2)$. Experiments were performed at $105{\sim}135^{\circ}C$ and 12~24 MPa. The blowing ratio and foam structure were significantly affected by changing the temperature and pressure conditions in the foaming process. The blowing ratio first increased with increasing foaming temperature and saturation pressure, reached a maximum and then decreased with a further increase in the foaming temperature and saturation pressure. Decreasing the rate of depressurization permitted a longer period of cell growth and therefore larger microcellular structures were obtained.

• Journal of Platform Technology
• /
• v.8 no.2
• /
• pp.22-31
• /
• 2020

The construction and operation of industrial automation has been actively taking place from manufacturing plan to production for improving operational efficiency of production line and flexibility of equipment. ISO/TC184 is standardizing on operating methods that can share information of programmable device controllers such as PLC and IoT that are geographically distributed in the production line. In this study, the design of the cell controller consists of PLC group and IoT group that perform signals such as temperature sensors, gas sensors, and pressure sensors for thermal processes and corresponding motors or valves. The operation and analysis of the cell controller were performed using SDN(Software Defined Network) and the three types of process services performed in thermal processes are real-time transmission service, loss-sensitive large-capacity transmission service, and normal transmission service. The simulation result showed that the average loss rate improved by about 17% when the traffic increased before and after the application of the SDN route technique, and the delay in the real-time service was as low as 1 ms.

• Bulletin of the Korea Photovoltaic Society
• /
• v.7 no.1
• /
• pp.17-26
• /
• 2021

Cu(In,Ga)Se₂(CIGS) 태양전지 연구개발은 1970년대부터 지속적으로 발전하여 유리 및 플렉서블 기판에서 모두 20% 이상의 고효율을 달성하였으며, 상용화도 성공적으로 이루었다. 최근 태양전지의 초고효율화를 위한 방안으로 태양전지를 적층하는 다중접합 태양전지 특히 제조원가를 고려한 탠덤 구조에 대한 연구가 상당히 주목을 받고 있다. 이는 페로브스카이트 태양전지를 상부셀로 적용하였을 때, 29.5%의 초고효율이 보고되었기 때문이다. 이런 추세로 보면 태양전지의 탠덤 구조는 초고효율화 달성에 필연적으로 사용될 것으로 생각된다. 하지만 초고효율화와 더불어 BIPV, VIPV, 모바일소자 등 심미성, 경량성, 유연성을 갖춘 다기능성 태양전지에 대한 요구까지 충족시키기 위해서는 궁극적으로 유연한 하부셀이 사용되어야 한다. 이런 점들을 고려하였을 때, 초고효율 유연 탠덤 태양전지의 하부셀로 유연 CIGS 박막 태양전지가 적합한 선택이 될 것으로 판단된다. 따라서 본 글에서는 CIGS 박막 태양전지를 기반으로 하는 탠덤 태양전지의 연구개발 현황에 대해서 살펴보고 향후 유연 탠덤 태양전지의 전망에 대해서도 기술하고자 한다.