• Journal of IKEEE
• /
• v.25 no.3
• /
• pp.485-492
• /
• 2021

In this paper, we propose the development of a defect inspection system for polygonal containers. Embedded board consists of main part, communication part, input/output part, etc. The main unit is a main arithmetic unit, and the operating system that drives the embedded board is ported to control input/output for external communication, sensors and control. The input/output unit converts the electrical signals of the sensors installed in the field into digital and transmits them to the main module and plays the role of controlling the external stepper motor. The communication unit performs a role of setting an image capturing camera trigger and driving setting of the control device. The input/output unit converts the electrical signals of the control switches and sensors into digital and transmits them to the main module. In the input circuit for receiving the pulse input related to the operation mode, etc., a photocoupler is designed for each input port in order to minimize the interference of external noise. In order to objectively evaluate the accuracy of the development of the proposed polygonal container defect inspection system, comparison with other machine vision inspection systems is required, but it is impossible because there is currently no machine vision inspection system for polygonal containers. Therefore, by measuring the operation timing with an oscilloscope, it was confirmed that waveforms such as Test Time, One Angle Pulse Value, One Pulse Time, Camera Trigger Pulse, and BLU brightness control were accurately output.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.1433-1436
• /
• 2005

임베디드 시스템의 발전으로 현재 진보된 로봇 시스템들은 운영 체제, 비젼 시스템 및 센서 시스템들을 별도의 호스트 PC의 도움 없이 독립적으로 탑재하여 가동 시킬 수 있다. 본 논문에서는 임베디드 시스템을 이용한 SBER (Small Biped Entertainment Robot)에 필요한 로봇의 제어기 구조와 로봇에 최적화된 임베디드 시스템을 구현한다. 또한 주 프로세서와 주 컨트롤러를 탑재한 최적화된 소형 엔터테인먼트 이족 로봇 개발을 목적으로 한다. SBER은 TI사의 DSP인 TMS320LF2407A를 로봇의 주 컨트롤러로 사용하여 로봇의 관절 제어를 통한 기본적인 보행 실험과 음원의 위치를 파악하기 위한 음원 위치 추적 문제를(Sound Localization) 수행한다. 또한 Intel사의 PXA255A를 주 프로세서로 사용하여 연산량이 높은 영상처리 알고리즘과 감정 표현, 장애물 인식 및 장애물 회피를 적용하여 보다 지능적인 로봇 시스템을 구현한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.569-570
• /
• 2021

Hydroponic cultivation is of considerable interest to the production of high-quality green plants. However, establishing the planting operating systems in hydroponic cultivation may result in chronic problems, such as the reproduction of harmful bacteria throughout the circulating culture fluid. Extensive research has been conducted on using an ultraviolet sterilization system to prevent culture fluid contamination. In this study, the proposed module, using UV-C LEDs that emit wavelengths between 270 and 285 nm, was designed along with a sensor and controller. The module was set to emit 300, 500, and 700 mW, for different culture fluid flow rates, to investigate its capacity to eliminate Escherichia coli, Clavibacter michiganensis, Pseudomonas cichorii, and Fusarium oxysporum.

• Journal of the Korea Convergence Society
• /
• v.8 no.2
• /
• pp.15-20
• /
• 2017

In this paper, Esp8266, Node.js, and TCP / IP socket communication are used to design a compact data integration device. This device is designed to configure server and client using Esp8266 module that supports Wifi connection and to support bidirectional data transmission using TCP / IP socket communication. The server is configured using the Node.js operating system, and the database is integrated using Mysql. The network is designed to have a separate IP address by assigning a private IP address to the router, such as a home network. This device can transmit data bidirectionally, store individual client data on the server side, and can check the flow of data transmitted bidirectionally through wire-shark, so that it can be used as a compact real-time data integration and convergence device.

• The Journal of the Korea Contents Association
• /
• v.7 no.1
• /
• pp.83-93
• /
• 2007

In this paper, we address a power-aware scheduling algorithm for a mixed real-time system which consists of periodic and sporadic tasks, each of which is characterized by its minimum period, worst-case execution requirement and deadline. We propose a dynamic voltage scaling algorithm called DVSMT(DVS for mixed tasks), which dynamically scales down the supplying voltage(and thus the frequency) using on-line distribution of the borrowed resources when jobs complete while still meeting their deadlines. With this scheme, we could reduce more energy consumption. As the proposed algorithm can be easily incorporated with RTOS(Real-Time Operating System), it is applicable for handhold devices and sensor network nodes that use a limited battery power. Simulation results show that DVSMT saves up 60% more than the existing algorithms both in the periodic-task and mixed-task systems.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.7
• /
• pp.47-55
• /
• 2013

Most of the applications implemented in embedded systems use timers equipped in MCU. The purposes of timer usage of the applications lie in a wide range of areas such as implementing software timers of real-time operating systems to measuring processing time of sensors. The elapsed times measured by the applications are various in length as well as in precision ranging from several us to several hundreds of ms. The paper analyzes the timing error factors caused by un- synchronizing timer clock pulse when timers are manipulated, and proposes a method of how to synchronize timer clock pulse to reduce the timing errors. As a result of an experiment, this paper shows that an error of 230us is reduced within 10us in case of appling the proposed method to a 4096Hz timer prescaled from 32768Hz by 8.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.2
• /
• pp.1-8
• /
• 2011

An underwater robot S/W framework consists of various sub-modules such as sensory data processing module, thruster control module, cognition module and behavior control module. Performance of a robot is determined by not only the efficiency of algorithms used but also effectiveness of their implementations. One most important factor of the effective implementation is the efficiency of data sharing module, as it transmits signals and data between the sub-modules and thus is directly related to the cycles of sensing and control The ideal data sharing module enables immediate access to any data source irrespective of system configurations. In reality, however, there are lots of obstacles including limitation of processing capacity of source modules, delay over network, and scheduling latency of operating systems. The paper proposes a new data sharing architecture and programming models to effectively handle such obstacles in implementation of underwater S/W framework on a small scale distributed computing system.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.6
• /
• pp.19-24
• /
• 2012

In this paper we introduce a commercial interactive whiteboard (IWB) system named ImSensorTouch by ImSensor Inc. Using this interface system, we can control our computer through the interactive whiteboard screen just by touching it with your finger or a pen. The interface interacts with Windows operating system (OS) and is adaptable to changes of surroundings especially temperature, and illumination condition. The proposed system calculates the difference between a reference image and a current image captured by a camera in the optical receptive field. And the position making the difference is used to generate the position on Windows screen. Then, we send a mouse event on the position to Windows OS. We have implemented the system using a critical section(CS) with two threads for the reference frame update process in which an adaptive thresholding technique is periodically exploited to get reliable result. We expect the system is competitive and promises a bright future in the IWB market.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.483-486
• /
• 2011

Recently, large and small vehicle accidents due to human life and property due to loss of function similar to that used on the plane with a black box mounted on the vehicle by the driver of the vehicle in order to analyze the cause of the accident vehicle you are using a black box. The black box used in the existing operating system, unlike the Android OS portability is good compared to other OS support an open platform for the development of additional costs or proven, which includes many libraries need to use any external libraries there are no advantages. In addition, the existing black box on the incident can not be sent automatically to report an accident notification has a problem. In this paper, another advantage of the OS used in a black box with an Android-based acceleration sensor on the test board GPS module and smart phones using the information, and incident detection capability to send a message to the specified number of black boxes with was implemented.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.1092-1095
• /
• 2019

In this paper, we propose the development of an embedded board for construction of smart factory. The proposed embedded board for construction of smart factory consists of main module, ADC module, I/O module. Main module is a main calculating device which includes communication pard that allows interface with external device with using industrial protocol and is ported operating system makes board operating into. ADC module takes part in transferring digital signal has converted from electrical signal to the main module from the external sensor which is installed on the field. I/O module is an input and output module which transfers to the main module about a status, alarm, command signal of field device and it has a function that blocks external noises from field device with isolation circuit into it. In order to evaluate the performance of the proposed embedded board for construction of smart factory, it has been tested by an authorized testing institute. As a result, quantity of interacting protocol was 5, speed of hardware clock synchronization was under 10us and operating time of battery without source power was over 8 hours. It produced the same result as the world's highest level.