• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.10-12
• /
• 2004

무선 센서네트워크는 센싱 지역에 분산되어 있는 초소형 센서 노드들이 감지/처리한 데이터를 수집노드로 전송하여 원격의 사용자가 센싱 지역의 상황인지를 가능하게 하는 유비쿼터스 컹퓨팅의 기반 네트워크이다. 전력 사용이 극히 제한된 센서 노드를 이용하여 무선 센서 망을 구성, 유지하며 데이터를 수집하기 위해서는 효율적인 망의 형태와 이에 따른 네트워크 배치 전략을 필요로 한다. 클러스터 기반 네트워크의 형태는 밀집도가 높은 센서네트워크에서 데이터병합을 수행하고 노드간 에너지 소비 균형을 이루기 위한 효과적인 구조이다. 본 논문에서는 클러스터 기반의 단일 홉 전송 구조에서 데이터 수집률을 높이고 노드간 에너지 사용의 균형을 이루게 하여 네트워크의 생존시간을 최대화할 수 있는 네트워크 배치 방법을 제안하였다. 클러스터링 기법에 따른 에너지 소비 모델을 분석하고 이를 통해 노드의 적절한 밀집도를 산출하였다. 싱크로부터 멀어질수록, 센서필드의 중앙보다는 외곽에 노드의 배치를 조밀하게 배치하여 네트워크의 생존시간을 늘렸다. 시뮬레이션을 통해 효율적인 네트워크의 배치가 노드간 에너지 소비의 균형을 이루도록 하여 네트워크의 생존시간을 늘일 수 있음을 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1670-1679
• /
• 2011

In the area of wireless sensor networks, sensor coverage and network connectivity problems are caused by a limited detection range and the communication distance of the nodes. To solve the coverage and connectivity problems, many studies are suggested, but most research is restricted to apply into the real environment because they didn't consider various environmental factors on wireless sensor network deployment. So in this paper, we propose a node deployment strategy considering environmental factors and the number of nodes in surveillance and reconnaissance sensor networks(SRSN). The proposed node deployment method divides the installation of the surveillance and reconnaissance sensor networks system into four steps such as identification of influences factors for node placement through IPB process, sensor node deployment based on sensing range, selection of monitoring site, and relay node deployment based on RF communication range. And it deploys the sensor nodes and relay nodes considered the features of the surveillance and reconnaissance sensor network system and environmental factors. The result of simulation indicates that the proposed node deployment method improves sensor coverage and network connectivity.

• Journal of the Korea Convergence Society
• /
• v.6 no.4
• /
• pp.139-146
• /
• 2015

WSN has been utilized in various directions from basic infrastructure of environment composition to business models including corporate inventory, production and distribution management. However, as energy organizations' private information, which should be protected safely, has been integrated with ICT such as WSN to be informatization, it is placed at potential risk of leaking out with ease. Accordingly, it is time to need secure sensor node deployment strategies for stable enterprise business. Establishment of fragmentary security enhancement strategies without considering energy organizations' security status has a great effect on energy organizations' business sustainability in the event of a security accident. However, most of the existing security level evaluation models for diagnosing energy organizations' security use technology-centered measurement methods, and there are very insufficient studies on managerial and environmental factors. Therefore, this study would like to diagnose energy organizations' security and to look into how to accordingly establish strategies for planning secure sensor node deployment strategies.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.2
• /
• pp.6-13
• /
• 2011

This paper deals with the interconnection problem in ad-hoc networks or sensor networks, where relay nodes are deployed additionally to form connections between given nodes. This problem can be reduced to a NP-hard problem. The nodes of the networks, by applications or geographic factors, can be deployed densely in some areas while sparsely in others. For such a case one can make an approximation scheme, which gives shorter execution time, for the additional node deployments by ignoring the interconnections inside the dense area of nodes. However, the case is still a NP-hard, so it is proper to establish a polynomial time approximation scheme (PTAS) by implementing a dynamic programming. The analysis can be made possible by an elaboration on making the definition of the objective function. The objective function should be defined to be able to deal with the requirement incurred by the substitution of the dense area with its abstraction.

• Convergence Security Journal
• /
• v.8 no.1
• /
• pp.19-26
• /
• 2008

In wireless sensor networks, an adversary can launch the wormhole attacks, where a malicious node captures packets at one location and tunnels them to a colluding node, which retransmits them locally. The wormhole attacks are very dangerous against routing protocols since she might launch these attacks during neighbor discovery phase. A strategic placement of a wormhole can result in a significant breakdown in communication across the network. This paper presents a compromise-resilient tunneled packet filtering method for sensor networks. The proposed method can detect a tunneled message with hop count alteration by a comparison between the hop count of the message and one of the encrypted hop counts attached in the message. Since the proposed method limits the amount of security information assigned to each node, the impact of wormhole attacks using compromised nodes can be reduced.

• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.161-170
• /
• 2020

There is systematic spatial variations in environmental properties due to sensitive reaction to external conditions at plastic greenhouse occupied 99.2% of domestic agricultural facilities. In order to construct 3 dimensional distribution of temperature, relative humidity, CO₂ and illuminance, measurement matrix as 3 by 3 by 5 in direction of width, height and length, respectively, dividing indoor space of greenhouse was designed and tested at experimental site. Linear regression analysis was conducted to evaluate optimal estimation method in terms with horizontal and vertical variations. Even though sole measurement point for temperature and relative humidity could be feasible to assess indoor condition, multiple measurement matrix is inevitably required to improve spatial precision at certain time domain such as period of sunrise and sunset. In case with CO₂, multiple measurement matrix could not successfully improve the spatial predictability during a whole experimental period. In case with illuminance, prediction performance was getting smaller after a time period of sunrise due to systematic interference such as indoor structure. Thus, multiple sensing methodology was proposed in direction of length at higher height than growing bed, which could compensate estimation error in spatial domain. Appropriate measurement matrix could be constructed considering the transition of stability in indoor environmental properties due to external variations. As a result, optimal measurement matrix should be carefully designed considering flexibility of construction relevant with the type of property, indoor structure, the purpose of crop and the period of growth. For an instance, partial cooling and heating system to save a consumption of energy supplement could be successfully accomplished by the deployment of multiple measurement matrix.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.80-85
• /
• 2015

In this paper, we present, an indstrial RFID layered microstrip patch antenna is designed using an inset feed method in order to improve recognition rates in a long distance as tags are attached to metal object by improving a problem of feeding power in fabricating metal tags and reducing effects of metallic object. The inset feed shows a distinctive characteristic that has no separation between emitters and feed lines differing from a structure with the conventional inductive coupling feed. This structure makes possible to produce a type that presents a low antenna height and enables impedance coupling for tag chips. Although it shows a difficulty in the impedance coupling due to increases in the parasite capacitance between a ground plane and an emitter in an antenna according to decreases in the height of a tag antenna, it may become a merit in designing the tag antenna because the antenna impedance can be determined as an inductive manner if a shorted structure is used for feeding power. Therefore, in this paper the microstrip patch antenna is designed as a modified type and applies the inset feed in order to reduce effects of metallic objects where the antenna is be attached. Also, the antenna uses a multi-layer structure that includes a metal plate between radiator and ground instead of using a single layer.