• Journal of Digital Contents Society
• /
• v.16 no.1
• /
• pp.97-104
• /
• 2015

The conventional 1 Hall sensor-type water gauge has some defects that it can not detect counterflow and low-speed flow of water, and it also generates power consumption during even sleep mode. In this paper, a low-power consumption wireless digital remote water gauge with a counterflow detection capability is proposed. The proposed water gauge detects the direction and amount of water flow by using the three Hall sensors placed at $120^{\circ}$ intervals with 8-year national standard life durability. The water gauge with three Hall sensors works without error regardless of water speed does not generate power dissipation during sleep mode by presented reading algorithm for bew water gauge. The proposed water gauge is designed to send its ID, current time and counting value to repeater or central control center with specified frequency by RF Module.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.1
• /
• pp.67-75
• /
• 2011

This paper presents the systematic optimal design of an overlapped ultrasonic sensor ring for high performance obstacle detection using effective beam overlap. Basically, a set of low directivity ultrasonic sensors of the same type are arranged in a circle at regular intervals with their beams overlapped. First, both real and simplified beam patterns of an ultrasonic sensor and several sensor models for obstacle position estimation within its beam pattern are introduced. Second, the obstacle detection range of an overlapped ultrasonic sensor ring and its simple sensor model for obstacle position estimation are described. Third, for both conic and non-conic shaped beam pattern, the design indices of an overlapped ultrasonic sensor ring for minimal positional uncertainty in obstacle detection are defined. Fourth, the constraints imposed on the structural parameters of an overlapped ultrasonic sensor ring to guarantee non empty beam overlap and to avoid excessive beam overlap are derived. Fifth, the optimal number of ultrasonic sensors for a given radius of an overlapped ultrasonic sensor ring and the optimal radius of an overlapped ultrasonic sensor ring are determined. Throughout this paper, the MA40B8 from Murata Inc. is taken as a representative commercial low directivity ultrasonic sensor.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.4
• /
• pp.341-347
• /
• 2011

This paper presents the performance evaluation. optimal design. and complex obstacle detection of an overlapped ultrasonic sensor ring by introducing a new concept of effective beam width. It is assumed that a set of ultrasonic sensors of the same type are arranged along a circle of nonzero radius at regular spacings with their beams overlapped. First, the global positional uncertainty of an overlapped ultrasonic sensor ring is expressed by the average value of local positional uncertainty over the entire obstacle detection range. The effective beam width of an overlapped ultrasonic sensor ring is assessed as the beam width of a single ultrasonic sensor having the same amount of global positional uncertainty, from which a normalized obstacle detection performance index is defined. Second. using the defined index, the design parameters of an overlapped ultrasonic sensor ring are optimized for minimal positional uncertainty in obstacle detection. For a given number of ultrasonic sensors, the optimal radius of an overlapped ultrasonic sensor ring is determined, and for a given radius of an overlapped ultrasonic sensor ring, the optimal number of ultrasonic sensors is determined. Third, the decision rules of positional uncertainty zone for multiple obstacle detection are provided based on the inequality relationships among obstacle distances by three adjacent ultrasonic sensors. Using the provided rules, the obstacle outline detection is performed in a rather complex environment consisting of several obstacles of different shapes.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.1
• /
• pp.15-23
• /
• 2000

RC oscillation method was applied to study the condenser characteristics of two metal sticks insulated by vinyl tube and used in the dielectric constant determinations of most soils. Its capacitance as influenced by the contacted ambient materials was measured as relative capacitance of the sensor sticks compared with the standard one on the RC oscillation circuit. According to the equivalent circuit of the sensor stick set, the measured capacitance was composed of a basic capacitance connected in parallel with sensor stick capacitance, which was composed of lineally connected vinyl tube capacitances and the sensing part capacitance. The dielectric constant (U) of the contacted ambient moist soil located in the sensing part around the sticks interrelated with the other parameters as following equation. $$\frac{1}{C-B}=\frac{k}{U}+Z$$ where C is the output total relative capacitance, B is the hidden and fixed basic relative capacitance, k is a constant related with U, and Z is a constant for the insulating vinyl tube capacitances determined by its thickness and dielectric constant. The constant k is determined by the spacing and length of sensor sticks. The Z value is theoretically an invariable constant, but it may become considerably bigger than the determined in lab if air tube is formed on the surface of sensor sticks by some shocks on them after their installation in soil. Due to the unstability of lab Z value, it may be better to revise it after sensor stick's installation in soil and no shaking shocks should be applied on them.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.1
• /
• pp.215-221
• /
• 2016

In this thesis we introduce a large quantity of input interface system using a low cost single chip microcontroller which is consists of walking board with 1600 switches, RS485 communication for switch data communication and PC application software for walking pattern analysis. When a pedestrian walks on the walking board, the pattern analysis of foot pressed switches can be utilized on diverse divisions of sports and industry such as walking physical therapy, dancing, a large quantity of sensors interface system, etc.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.5
• /
• pp.15-23
• /
• 1994

We developed an electronic lens for acoustic imaging systems, which is linear array with 31 microphones equally spaced with distance 34mm. Resonant frequency fo receiver circuit coupled to microphone is 20 kHz. We arranged 16 microphones horizontally and 15 microphones vertically, so that the array allows us to obtain a 2 dimensional angle of source, and to track the motion of source in real time. Due to the problem of aliasing in discrete Fourier Transfrom, the maximum observable angle of the lens is limited to 15${\circ}$. We also employed quadrature phase detection scheme to adjust the focus. We have tested the acoustic lens with a personal computer in an anechoic room and obtained the results agreed with the acoustic imaging theory.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.444-444
• /
• 2023

하천 및 저수지와 같은 공간의 수체 탐지는 수자원 관리에서 매우 중요하며, 유역의 수문학적 과정을 이해하는데 도움을 준다. 수문학적 데이터 수집은 우량계, 수위계와 같은 물리적 인프라의 배치가 필요하다. 그러나 상대적으로 저개발된 국가는 수문학적 측정을 위한 인프라가 매우 미흡한 것이 현실이며, 북한과 같은 비접근 지역에 대한 수문학적 과정을 분석하는데는 한계가 있다. 인공위성 원격탐사 센서 중 SAR영상은 지표면에 직접 전파를 방사하고 산란되어 돌아오는 신호를 수신하여 영상을 만들기 때문에 일반적인 광학영상과는 달리 햇빛의 유무와 강우, 구름여부 등의 기상 조건의 영향을 거의 받지 않는 장점이 있다. 또한 국내와 같이 계절적인 요인과 인간활동에 의해 변화되는 물 순환을 SAR 영상은 지표수의 계절적 및 연간 변동성을 모니터링하는데 매우 유용한 자료로 평가되고 있다. 본 연구는 SAR영상을 이용하여 국내의 검증 가능한 지역의 저수지 수면적 변화를 모니터링하고 저수지 수면적과 저수량 분석을 수행하는 것을 목적으로 하였다. 분석자료인 SAR영상은 ESA의 Sentinel-1영상을 2022년 4월부터 2022년 11월의 자료를 수집하여 소양강댐 저수지 수면적과 저수량과의 관계식을 도출하였다. 수체 추출을 위한 SAR 영상은 특히 수로의 일부 가장자리와 홍수터의 식물 존재로 인한 제외지의 매핑에 부정확성을 포함하여 처리에 몇 가지 단점을 갖는 한계도 존재하지만 악천후의 기상 조건에서도 작동할 수 있는 SAR 영상의 능력 덕분에 규칙적인 시간 간격으로 수체면적의 변화에 대한 정보를 제공할 수 있다. 향후 북한 지역의 주요 댐 저수지 수면적에 대한 연간변화와 장기간의 추세를 분석하는 연구를 진행할 계획이다.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.1
• /
• pp.17-27
• /
• 2019

In this study, we conducted a study to predict the photovoltaic power by constructing the sensor based meteorological data observation system and the accurate terrain data obtained by using LiDAR surveying. The average sunshine hours in 2018 is 4.53 hours and the photovoltaic power is 2,305 MWh. In order to analyze the effect of photovoltaic power on the installation angle of solar modules, we installed module installation angle at $10^{\circ}$ intervals. As a result, the generation time was 4.24 hours at the module arrangement angle of $30^{\circ}$, and the daily power generation and the monthly power generation were the highest, 3.37 MWh and 102.47 MWh, respectively. Therefore, when the module arrangement angle is set to $30^{\circ}$, the generation efficiency is increased by about 4.8% compared with the module angle of $50^{\circ}$. As a result of analyzing the influence of the seasonal photovoltaic power by the installation angle of the solar module, it was found that the photovoltaic power was high in the range of $40^{\circ}{\sim}50^{\circ}$, where the module angle was large from November to February when the weather was cold. From March to October, it was found that the photovoltaic power amount is $10^{\circ}{\sim}30^{\circ}$ with small module angle.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.8
• /
• pp.619-627
• /
• 2017

MIMO(Multi-Input Multi-Output) radar is an emerging radar technology for its numerous advantages. However, in the electric warfare viewpoint, MIMO radar is a new developed radar technology for that existing parameter estimation cannot applied and a new radar parameter estimation based on the characteristics of MIMO radar is desired. In this paper, we propose a blind estimation scheme for the number of orthogonal waveforms of a uniform linear array(ULA) MIMO radar using minimum two electronic sensors.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.4_1
• /
• pp.293-298
• /
• 2014

Recently, the direct georeferencing has been becoming a common method in the aerial photogrammetry. As this direct georeferencing method using converged sensor of the digital photogrammetry camera and GPS(Global Positioning System)/INS(Inertial navaigation System), more rapid and accurate aerial photogrammetry has improved following advanced performance in photogrammetry. Since the accuracy of EO parameters from the direct georeferencing is determined by GPS/INS accuracy, it is significant to calculate the exact attitude information using values of INS rotations. For following calculations, the misalignment, such as INS rotation and the gap of GPS/INS, has to be decided. Because the number of ground control points are used for tirangulation and boresight calibration, those results should be different according to array and location of ground control points. In the study, those location and array of ground control points were tested to be used boresight calibration. As a result, there is no significant change of misalignment and exterior orienation parameters in the case when ground control points were at all course. On the contrarily, the difference has been shown in the case of no ground control point at course.