• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.10
• /
• pp.1845-1851
• /
• 2016

In this paper, a design method for a wideband square loop antenna for Digital TV applications is studied. The proposed loop antenna is a square loop antenna combined with circular sectors to connect with central feed points. The square loop is used instead of the circular loop in order to miniaturize the antenna size. The input reflection coefficient and gain characteristics of the proposed antenna are analyzed to match with the 75 ohm port impedance for DTV applications. The effects of the gap between the circular sectors and the length of the square loop on the input reflection coefficient and gain characteristics are examined to obtain the optimal design parameters. The optimized antenna is fabricated on an FR4 substrate, and the experiment results show that it operates in the frequency band of 470-1,300 MHz for a VSWR < 2, which assures the operation in the DTV band.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1623-1630
• /
• 2010

In this study, effective forming methods for reducing the roll-over of a sector tooth, which is a main component of an automotive seat recliner, are proposed. Due to the large amount of roll-over, accurate contact between the inner gear of a sector tooth and the outer gear of a pawl tooth cannot be normally achieved; thus sensitivity and safety for the passengers decrease. To overcome the aforementioned drawback, we investigated the effect of flowcontrol forming methods involving local embossing die, coining punch, and VIC (Variable Inverse Clearance) on the roll-over depth by FE-analysis and an experiment. The results of a fine-blanking experiment for verifying the proposed methods showed that VIC type is decidedly superior from the aspects of reduction of roll-over and tool strength of the sector tooth.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.1
• /
• pp.81-89
• /
• 2013

The purpose of this study is to analyze the information effect about the pricing using the ETF price, the benchmark index, and the total tracking error between the ETF price and the benchmark index on the index ETF market and sector ETF markets. Furthermore, the total tracking error is distinguished between the market tracking error and the NAV tracking error. Summary of this study are as follows: First, While KODEX200 don't have impact factors on the price, the most sectors of ETF have the factors affecting the pricing decision. They are the day before the total tracking error or market tracking error. Second, for the ETF price of the most industry, we find that the day before the market tracking error have the price discovery function because it is a negative(-) coefficients. But NAV tracking error could not find such a feature. Finally, the sector ETF price of energy chemical, construction, IT, and semiconductor industries affected of the day before positive(+) impact by the benchmark index price.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.831-834
• /
• 2011

LEACH(One of the leading algorithms in the field of WSN) for the life of the system, even by the number of all nodes to ensure that the cluster header. However, each round does not guarantee a certain number of cluster header. So sometimes cluster header is elected of small number or not elected. If cluster header number is to small, takes a heavy load on cluster header. And empty cluster is occur depending on the location of the cluster header. The algorithm proposed in this paper, the area of interest is divided into sectors. And randomly, cluster header be elected one the in each sector. When clustering the sensor nodes will belong to the nearest cluster header. So clustering is independent of the sector. This algorithm is guarantee a certain number of cluster header in each round. And has prevent occurrence of empty cluster.

• Journal of Biomedical Engineering Research
• /
• v.7 no.1
• /
• pp.59-66
• /
• 1986

A prototype ultrasound sector B-scanner has been developed where the front-end hardware refers to all the necessary circuits for transmitting the ultrasound pulses into the human body and receiving the reflected echo signals from it. The front-end hardware can generally be divided into three parts, i.e., a pulse generator for insonification, a receiver which is responsible for processing of low-level analog signals, and a steering controller for driving the mechanical sector probe whose functions and design concepts are described in this paper. The front-end hardware is implemented which incorporates the following features: improvement of the axial resolution using a circuit which reduces the ring-down time, flexibility of generating time-gain compensation curve, and adoption of a one-chip microcomputer for generating the rate pulses based on the sensor output waveforms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1469-1476
• /
• 2015

We propose a beam selection algorithm that improves inter sector SIR using a code-book of a circular array antenna in multi-sector wireless mesh network environments. The proposed method improves SIR using a combination of fed back code-book and guarantees QoS of all nodes. Computer simulation exhibits the proposed scheme demonstrates 4.42dB higher SIR than that of the conventional code-book method, QoS with proportional fair is improved by 1.70dB and fact that all nodes are satisfied Qos is also shown.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.7
• /
• pp.9-17
• /
• 2000

Determining the position and velocity of mobiles is an important issue for efficient handoff and channel allocation in microcell structure. Our early work proposes a technique for estimating the mobile location in the microcellular architecture. This process is based on the three step position estimation which determines the mobile position by gradually reducing the area of the mobile position. Using three step method, the estimator first estimates the locating sector in the sector estimation step, then estimates the locating zone in the zone estimation step, and then finally estimates the locating block in the block estimate step. But this scheme is prone to errors when the mobile is located in the boundary of sectors or tracks. In this paper we propose the enhanced scheme to reduce the estimation error.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.11a
• /
• pp.333-336
• /
• 2006

플래시 메모리는 휴대폰과 PDA 와 같은 이동 기기에서 저장 장치로 널리 사용되고 있다. 또한 기가바이트(GB) 단위의 대용량화로 인해 노트북과 개인용 컴퓨터에서 보조기억장치로 사용되고 있다. 요즘에는 대용량의 데이터를 효율적으로 다루기 위한 B+트리와 같은 자료구조를 플래시 메모리상에서 저비용의로 구현하려는 연구들이 이루어지고 있다. 지금까지의 연구에서는 플래시 메모리에서 B+트리를 구축할 때 노드 크기를 플래시 메모리의 섹터(sector) 크기로 사용해왔다. 본 논문에서는 노드 크기가 플래시 메모리의 섹터 크기보다 더 커졌을 경우, 플래시 메모리에서 구현되는 B+트리의 구축성능과 검색성능 그리고 저장 공간 사용량을 비교 분석한다. 키 삽입 시 정렬 알고리즘과 비정렬 알고리즘을 각각 사용해 구축비용을 측정하였으며 효율적인 노드 검색을 위해 인덱스 노드 헤드 구조를 사용한다. 그리고 이러한 실험결과는 B+트리 노드 크기를 섹터 크기보다 블록 크기로 할당할 때 B+트리 성능의 우수성을 보인다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.807-811
• /
• 2001

In this paper we proposed a dual-frequency circular sector microstrip antenna with orthogonal polarized modes and high isolation between the two feeding ports. And then we designed a transceiver operating at 5.6 GHz for transmitting and at 5.5 GHz for receiving. The good isolation provided by the proposed antenna is used as the basis for the transmit-receive filtering of transceiver. The operating frequencies and polarization characteristics of the proposed antenna is calculated by using a cavity model. The 5-parameters and radiation patterns of the antenna are measured. A power amplifier and a low noise amplifier are designed and integrated with antenna to make a transceiver, which has about 13dB transmitting gain and about 8㏈ receiving gain.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.1
• /
• pp.81-92
• /
• 1997

Rear floating junction cell (RFJC), using the buried contact technology, is capable of eliminating the efficiency limitations on the single sided cells by providing betterear surface passivation. The implementation of this structure, is simpler and lower in cost and therefore viable for commercial production. However, the contributions, due to damages in the two sets of grooves, to the total dark saturation current density has limited the achievable efficiency of the RFJC to only 21.5 %. This Paper reports on the efficiency estimates of RFJC using PC-1D.