• Korean Journal of Food Science and Technology
• /
• v.31 no.6
• /
• pp.1421-1426
• /
• 1999

Sixteen domestic barley varieties and subsequently produced malts were evaluated for quality characteristics. Diastatic power(DP), complementary actions of amylases in malt, had a wide $variation(139{\sim}220^{\circ}L)$ among the barley varieties. Some 6-row barley varieties demonstrated significantly high DP values. ${\beta}-\;and\;{\alpha}-amylase$ activities in malts were also significantly influenced by barley varieties. Diastatic power was highly correlated with ${\beta}-amylase$ activity, indicating that the ${\beta}-amylase$ activity was a predominant factor determining saccharifying action in malt. Amylograph was used to indirectly estimate starch-degrading enzymatic activity, and the reduction in amylograph viscosity was associated with ${\alpha}-amylase$ activity. Barley quality factors in relation to enzymatic activity of malt were analyzed, and the barley variety with lower kernel weight and less plumper kernels tended to produce higher starch-degrading enzyme activity. Potential diastatic power, an estimate of bound ${\beta}-amylase$ in raw barley, was associated with diastatic power in the final malt. Potential diastatic power turned out to be an important factor for predicting good malting barley.

• Proceedings of the KAIS Fall Conference
• /
• 2004.11a
• /
• pp.99-102
• /
• 2004

Display process has adopted RCA clean, being applied to large area and coped with environmental issue for last ten years. However, the approaching concept of ozonized, hydrogenised, or electrolyzed water cleaning technologies is within RCA clean paradigm. In this work, only electrolyzed anode water was applied to clean particles and organics as well as metals based on Pourbaix concept, and as a test vehicle, MgO particles were introduced to prove the new concept. The electrolyzed anode water is very oxidative with high oxidation reduction potential(ORP) and low in pH of more than 900mV and 3.1, respectively. MgO particles were immerged in the anode water and its weight losses due to dissolution were measured with time. Weight losses were in the ranges of 100 to 500 micrograms in 250m1 anode waters depending on their ORP and pH. Therefore it was concluded that the cleaning radicals in the anode water was at least in the range of 1 to 5E20 ea per 250 ml anode water equivalent to IE18 ea/cm3. Hence it can be assumed that the anode water be applied to display cleaning since 1E10 to IE15 ea/cm3 ranges of contaminants are being treated. In addition, it was observed that anode water does not develop micro-roughness on hydrophobic surface while it does on the native silicon oxide.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.1
• /
• pp.72-81
• /
• 2009

This paper presents quasi-resonant type high power factor ac power supply for atmospheric pressure plasma cleaning system adopting three phase PFC boost converter and it's control method. The presented ac power supply consists of single phase H-bridge inverter, step-up transformer for generating high voltage and three phase PFC boost converter for high power factor on source utility. Unlikely to the traditional LC resonant converter, the propose one has an inductor inside only. A single resonant takes place through the inside inductor and the capacitor from the plasma load modeled into two series capacitor and one resistance. The quasi-resonant can be achieved by cutting the switching signal when the load current decrease to zero. To obtain power control ability, the propose converter controlled by two control schemes. One is the changing output pulse period scheme in the manner of PFM(Pulse Frequency Modulation) control. On the other, to provide more higher power to load, the DC rail voltage is directly controlled by the 3-phase PFC boost converter. The significant merits of the proposed converter are the uniform power providing capability for high quality plasma generation and low reactive power in AC and DC side. The proposed work is verified through digital simulation and experimental implementation.

• The Journal of the Korea Contents Association
• /
• v.13 no.9
• /
• pp.485-494
• /
• 2013

In child care teacher aptitude, it is identified that there is difference between male and female in sociability for the infants, but it shows that there is no difference in other field and implies that compared with gender of child care teacher, desire and qualification are more important for child care teaching. In addition,, in child care teacher aptitude, it is identified that as variable, commitment for duty expressively explicates child care teacher's professional perception, and the following things are shown as the variables to meaningfully explain the child care efficacy : creativity, self-improvement, sociability for infants, receptiveness, sensitiveness and safety management capacity significantly. Finally, it is turned out that creativity and self-improvement as main variable, expressively explains multicultural teaching efficacy. It is suggested the necessity to instruct pre-service child care teachers to possess creativity and be able to develop themselves, and improve multicultural teacher competencies.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.19 no.1
• /
• pp.11-15
• /
• 2013

In order to find a sanitary logistic way to handle library books, papers and environmental sources contacting the books were tested in their microbial contamination load and methods to decontaminate the books were investigated. Generally bacterial load of inner book pages was very low, but increased when contaminated with liquid such as saliva. In contrast, their lateral ends showed much higher bacterial contamination presumably due to dry dust contamination on there. As operations to improve the sanitary book conditions, turbulent air blow was found to be workable for reducing dry dusty contamination and 280 nm ultra-violet (UV) light emitting diode (LED) was so for decontaminating wet surface contamination. Microbial inactivation by the UV LED could be realized with irradiation for more than 5 minutes at 2 cm distance. Air blow of 5.5 m/s for 0.5~1 minute could reduce the dusty contamination on a model book surface.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.67-67
• /
• 2000

CeO2는 cubic 구조의 일종인 CaR2 구조를 가지고 있으며 격자상수가 Si의 격장상수와 매우 비슷하여 Si 기판위에 에피텍셜하게 성장할 수 있는 가능성이 매우 크다. 따라서 SOI(silicon-on-insulator)구조의 실현을 위하여 Si 기판위에 CeO2 박막을 에피텍셜하게 성장시키려는 많은 노력이 있어왔다. 또한 metal-ferroelectric-semiconductor field effect transistor)에서 ferroelectric 박막과 Si 기판사이의 완충층으로 사용된다. 이러한 CeO2의 응용을 위해서는 Si 기판 위에 성장된 CeO2 박막의 방위성 및 CeO2/Si 구조의 전기적 특성을 알아보는 것이 매우 중요하다. 본 연구에서는 Si(100) 기판위에 CeO2(200)방향으로 성장하는 박막과 EcO2(111) 방향으로 성장하는 박막을 rf magnetron sputtering 방법으로 증착하여 각각의 구조적, 전기적 특성을 분석하였다. RCA 방법으로 세정한 P-type Si(100)기판위에 Ce target과 O2를 사용하여 CeO2(200) 및 CeO2(111)박막을 증착하였다. 증착후 RTA(rapid thermal annealing)방법으로 95$0^{\circ}C$, O2 분위기에서 5분간 열처리를 하였다 이렇게 제작된 CeO2 박막의 구조적 특성을 XRD(x-ray diffraction)방법으로 분석하였고, Al/CeO2/Si의 MIS(metal-insulator-semiconductor)구조를 제작하여 C-V (capacitance-voltage), I-V (current-voltage) 특성을 분석하였으며 TEM(transmission electron microscopy)으로 증착된 CeO2막과 Si 기판과의 계면 특성을 연구하였다. C-V특성에 있어서 CeO2(111)/Si은 CeO2(111)의 두께가 증가함에 따라 hysteresis windows가 증가한 방면 CeO2(200)/Si은 hysteresis windows가 아주 작을뿐만 아니라 CeO2(200)의 두께가 증가하더라도 hysteresis windos가 증가하지 않았다. CeO2(111)/Si과 CeO2(200)/Si의 C-V 특성의 차이는 CeO2(111)과 CeO2(200)이 Si 기판에 의해 받은 stress의 차이와 이에 따른 defect형성의 차이에 의한 것으로 사료된다.

• Membrane Journal
• /
• v.15 no.1
• /
• pp.70-83
• /
• 2005

By supplying air intermittently in various mode, the effects of oxic/anoxic time ratio and air scrubbing in aeration condition on the membrane flux and permeability were investigated. When suction pump stops, vacuum pressure remains inside the suction pump. Therefore, the effect of remaining vacuum pressure in the suction pump on fouling of membrane was investigated. The effect of EPS (Extra cellular Polymeric Substance) which is generated due to the long SRT and high concentration of MLSS and the dose of coagulant on the membrane were also investigated. The suitable oxic/anoxic time ratio for the best removal efficiency of organic matter and nitrogenous matter was 40 minutes (Oxic) : 20 minutes (Anoxic). At this time ratio, alum was dosed into the aeration tank. The result of dosing alum was that the concentration of alum solution might affect nitrification and denitrification. To remove 1 mg/L of phosphorus in MBR process, it needs 0.75 mg/L of alum solution.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.82.2-82.2
• /
• 2013

반도체 및 디스플레이 소자를 생산 하기 위하여 다양하고 많은 공정 기술이 사용 되며 그 중에서 플라즈마를 이용하는 제조공정이 차지 하는 부분은 상당한 부분을 차지 하고 있습니다. 전체 반도체 공정 중 48%가 진공공정이며, 진공공정 중 68% 이상이 플라즈마를 이용하고 있으며, 식각과 증착 장비 뿐만 아니라 세정과 이온증착 에 이르기 까지 다양하며 앞으로도 더욱 범위가 늘어 날 것으로 보입니다. 이러한 플라즈마를 이용한 제조 공정들은 제품의 생산성을 향상 하기 위하여 오염제어 기술을 비롯한 공정관리기술 그리고 고기능 센서기술을 이용한 공정 모니터링 및 제어 기술에 이르기 까지 다양한 기술들을 필요로 합니다. 플라즈마를 이용한 제조 장비는 RF파워모듈, 진공제어모듈, 공정가스제어모듈, 웨이퍼 및 글래스의 반송장치, 그리고 온도제어 모듈과 같이 다양한 장치의 집합체라 할 수 있습니다. 플라즈마의 생성과 이를 제어 하기 위한 기술은 제조장비의 국산화를 위한 부단한 노력의 결실로 많은 부분 기술이 축적되어 왔고 성과를 거두고 있습니다. 그러나 고기능 모니터링 센서 기술 개발은 그 동안 활발 하게 이루어져 오고 있지 않았으며 대부분 외산 기술에 의존해 왔습니다. 세계 반도체 시장은 현재 300 mm 웨이퍼 가공에서, 추후 450 mm 시장으로 패러다임이 변화될 예정이며, 미세화 공정이 더욱 진행 됨에 따라 반도체 제조사들의 관심사가 "성능 중심의 반도체 제조기술"로부터 "오류 최소를 통한 생산성 향상"에 더욱 주목 하고 있습니다. 공정미세화 및 웨이퍼 대구경화로 인해 실시간 복합 센서를 이용한 데이터 처리 알고리즘 및 자동화 소프트웨어의 기능이 탑재된 장비를 요구하고 있습니다. 주식회사 레인보우 코퍼레이션은 플라즈마 Chemistry상태를 정성 분석 가능한 OES (Optical Emission Spectroscopy)를 이용한 EPD System을 상용화 하여 고객사에 공급 중이며, 플라즈마의 광 신호를 실시간으로 고속 계측함과 동시에 최적화된 알고리즘을 이용하여 플라즈마의 이상 상태를 감지하며 이를 통하여 제조 공정 및 장비의 개선을 가능하게 하여 고객 제품의 생산성을 향상 하도록 하는 기술을 개발 하고 있습니다. 본 심포지엄에서는 주식회사 레인보우 코퍼레이션이 개발 중인 "실시간 고속 플라즈마 광 모니터링 기술" 의 개념을 소개하고, 제품의 응용 범위와 응용 방법에 대하여 설명을 하고자 합니다.

• Membrane Journal
• /
• v.30 no.2
• /
• pp.138-148
• /
• 2020

The purpose of this study was to identify the cleaning efficiency of fouled multi-bore hollow fiber membranes after purification of contaminated water. The PSf (polysulfone) based hollow fiber membrane manufactured by Pure & B Tech Co., Ltd. Was used in this study. The antifouling characteristics during the water treatment were studied using bovine serum albumin (BSA) as a model compound and the chemical resistance was evaluated after long-term impregnation in sodium hypochlorite (NaOCl) solution and Citric acid to understand the long term stability of the membranes. Water permeability and mechanical strength of the membranes after prolonged chemical exposure was measured to observe the change in mechanical stability and long term performance of the membrane. moreover, the recovery efficiency was also evaluated after chemical enhanced backwashing of a membrane contaminated with bovine serum albumin. The PSf hollow fiber membrane exhibited excellent chemical resistance, and it was confirmed that the efficiency of sodium hypochlorite was high as a result of chemical enhanced backwashing.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.5
• /
• pp.545-550
• /
• 2012

Steam generator is one of the major components of nuclear power plant and steam generator tubes are the pressure boundary between primary and secondary side, which makes them critical for nuclear safety. As the operating time of nuclear power plant increases, not only damage mechanisms but also scaled deposits on steam generator tubes are known to be problematic causing tube support flow hole blockage and heat fouling. The ability to assess the extent and location of scaled deposits on tubes became essential for management and maintenance of steam generator and eddy current bobbin data can be utilized to measure thickness of scale on tubes. In this paper, tube reference standards with various thickness of scaled deposit has been set up to provide information about the overall deposit condition of steam generator tubes, providing essential tool for steam generator management and maintenance to predict and prevent future damages. Also, methodology to automatically measure scale thickness on tubes has been developed and applied to field data to estimate overall scale amount.