• ETRI Journal
• /
• v.14 no.4
• /
• pp.210-216
• /
• 1992

불요 전자파 제거용 필터의 유전체로 사용되는 Zirconium Titanate 세라믹 유전체에서 $MoO_2$ 함유량과 소결온도에 변화를 주어 이들이 유전특성에 미치는 영향에 대하여 검토하였다. 일반적으로 $MoO_2$ 함유량보다는 소결온도의 변화가 유전률, 품질계수 및 소결밀도 등에 더 큰 영향을 주었으며, 정전용량의 온도계수 측면에서는 $MoO_2$ 함유량을 제어하여0ppm$^\{circ}C$근처로 이동시켜 상당히 안정된 온도 특성으로 개선할 수 있었다.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.72.1-72
• /
• 2003

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.202.2-202
• /
• 2003

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.466-466
• /
• 2007

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.35-37
• /
• 2001

다층 인쇄 회로 기판에 Combline 구조를 가진 스트립 라인 또는 마이크로 스트립 라인 대역통과 필터를 구현하였다. 저 비용 구현과 이동성과 휴대성을 강조하기 위해 기존의 세라믹 대신 FR4 와 에폭시를 기반으로 하는 다층 회로 기판의 도체 층에 집적화하였다. Combline 각 끝단에 커패시터를 부하 함으로써 전기적 길이를 화장하였고 전체적인 크기를 감소시킴으로서 적당한 필터 특성을 얻을 수 있었다. 구현된 필터는 마이크로파 대역에서 사용 가능하며 특히 Bluetooth나 Wireless LAN 과 같은 ISM 대역을 사용하는 무선통신소자로서 사용 가능하다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.2 no.3
• /
• pp.201-209
• /
• 2004

Important operation parameters and performance of a high temperature ceramic candle filter system were evaluated through a series of demonstration tests at a pilot-scale vitrification plant. At the initial period of each test, due to the growth of dust cake on the surface of ceramic candles, the pressure drop across the filter media increased sharply. After that it became stable to a certain range and varied continuously proportion to the face velocity of off-gas. On the contrary, at the initial period of each test, the permeability of filter element decreased rapidly and then it became stable. Back flushing of the filter system was effective under the back flushing air pressure range of 3∼5 bar. Based on the dust concentrations measured by iso-kinetic dust sampling at the inlet and outlet point of HTF, the dust collection efficiency of HTF evaluated. The result met the designed performance value of 99.9%. During the demonstration tests including a hundred hour long test, no specific failure or problem affecting the performance of HTF system were observed.

• Korean Chemical Engineering Research
• /
• v.57 no.4
• /
• pp.461-468
• /
• 2019

Demand for improving dust removal efficiency in coal power plants and the dust removal requirement to the level of capturing fine particulate matter and ultrafine particles have been increasing. While bag filter and electrostatic precipitator (ESP) are typically used for dust removal in the processes operating at atmospheric pressure, metal filters or ceramic filters are employed for dust which is produced at high temperature/pressure system as in coal gasification. For dust removal at the high temperature/pressure conditions, two metal filters of five compressed/sintered layers were manufactured and applied to analyze the dust removal characteristics. Manufactured metal filters exhibited more than 99% dust removal efficiency on coal gasification fine particulates in mass basis. To evaluate the fine particulate removal efficiency of less than $2.5{\mu}m$, JIS standard fine sample was used and confirmed the removal efficiencies of 97% and 70~82% on the fine particulates of $1{\sim}2.5{\mu}m$ size range. For the size range of less than $1{\mu}m$, dust removal efficiency of manufactured metal filters significantly degraded with smaller particle size. Improving methods are proposed to overcome the limitations in applying to fine dust of less than $1{\mu}m$.

• Membrane Journal
• /
• v.26 no.2
• /
• pp.87-96
• /
• 2016

Ceramic materials have attracted increasing attention in the last 10 years because of their high thermal stability and high permeation property compared with polymeric nanofiber membranes. Recently, novel nanofiber ceramic membranes with high porosity and flux have been fabricated from metal oxide nanofibers. To improve the performance of ceramic membranes and reduce their costs, a new ceramic membrane with a selective separation layer made of nanofibers was fabricated by electrospinning process and modification process for filtration system. This review summarizes the research trends for the development of ceramic nanofiber membrane over the past few years.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1164-1171
• /
• 2008

The present study, which is about a ceramic waveguide filter for UMTS, designed a filer using a circuit and structure simulator, suggested a design method at a required frequency band, and developed a waveguide filter, which can be applied at a power of over 50W and be miniaturized, through implementing the design and examining related variables and characteristics. In the results of designing a waveguide filter with the center frequency of 1,950 MHz and 2,140 MHz and examining its characteristics, bandwidth was 60MHz, insertion loss was below 1.0dB, return loss was over 20dB, and attenuation at the relative frequency band was over 60dB. In the results of a power station test, the characteristics did not change and internal temperature was below $30^{\circ}C$ at 50.8W, and this confirmed that the filter is usable at over 50W.

• Analytical Science and Technology
• /
• v.15 no.3
• /
• pp.256-262
• /
• 2002

After porous filters were manufactured using cordierite powder whose mean paricle size was 200${\mu}m$, they were loaded with catalysts such as $V_2O_5$, CuO and $LaCoO_3$ by vacuum impregnation method. And the NOx/SOx simultaneous removal efficiency was measured by passing NO and $SO_2$ through catalyst-loaded ceramic filters. The cordierite porous filters had the apparent porosity of 61.6%, the compressive strength of 12.3 MPa and the pressure drop of 147 pa at the face velocity of 5 cm/sec. According to the analysis of NO/$SO_2$ simultaneous removal efficiency, perovskite $LaCoO_3$ catalyst was the most efficient for the simultaneous NO and $SO_2$ removal. The $LaCoO_3$ catalyst-loaded filter could remove more than 90% for NO and more than 80% for $SO_2$.