• Journal of Animal Science and Technology
• /
• v.49 no.3
• /
• pp.379-386
• /
• 2007

This study was conducted to investigate the effect of the mating system on the retail cut yield and meat quality in pigs. A total of 210 samples were used to estimate meat productivity and meat quality two blocks of two boarlines Duroc (D) and Berkshire (B) were mated to sows of the sowlines Yorkshire×Landrace (YL) and Berkshire (B). Results showed that YLD (YL♀×D♂) and BD (B♀×D♂) had higher percentages of Boston butt and belly than YLB while it has higher percentages of lean meat yield than YLB (YL♀×B♂). There were no significant differences in crude protein and ash content of pork from different breeds (P>0.05). However, YLB and YLD had higher moisture content in loin and Boston butt than BD (P<0.05). The pH of BD was highest in pork loin and belly (P<0.05). There differences in meat yield, pH and moisture content among the genotypes suggested that pork quality might be affected by the lightness and cooking loss. BD was lowest lightness value (CIE L*) and cooking loss in pork loin among the genotypes (P<0.05). The percentage of saturated palmitic acid (C16:0) in Boston butt (P<0.05) of BD had significant lower, while the percentage of unsaturated palmitoleic (C16:1) and oleic acid (C18:1) had higher in pork loin and belly (P<0.05). Drip and marbling score were found significantly different in genotypes and BD had lower drip and higher marbling score in pork loin and belly (P<0.05). The sensory evaluations indicated that the highest overall acceptability in BD was attained. From the results, BD breed had highest meat quality among crossbred pigs.

• Fire Science and Engineering
• /
• v.34 no.2
• /
• pp.156-165
• /
• 2020

In this paper, the application of evacuation delay time (Cognition time + initiation time) and examine the degree of opening of fire doors in households for evaluating evacuation safety and suggest a realistic alternative. In order to proceed with this study, first of all, the preliminary investigation on evacuation safety evacuation of residential-type buildings (Apartment, urban living houses, etc.) among the performance-oriented design targets of Gwangju Metropolitan City, which was implemented until June 2018. Then, for the two representative types that are commonly used among the previously surveyed buildings, evacuation delay time is applied to W1, W2, and respectively simulating the opening of the doors is applied to th full open, 1/4 open, the leakage gap and evacuation safety evaluation was performed. As a result of evaluating evacuation safety was found that it is difficult to secure evacuation safety regardless of evacuation delay time W1 and W2 when the fire door is fully open and 1/4 open, Only when the leakage gap is applied evacuation safety was ensured even if evacuation delay time W2 was applied. Therefore, when a residential building is subject to performance-oriented design, evaluating the application of W2 rather than W1 is considered for evacuation delay time to reflect concern about privacy infringement due to CCTV installation, etc. In order to secure the Smoke blocking performance of the fire door and to improve the performance-oriented design, I would like to propose to consider the method of applying a leak gap to the degree of opening of the fire door. Through this, it is expected that the performance-oriented design will be a step further by performing evacuation safety evaluation with more realistic data.

• Journal of Life Science
• /
• v.26 no.4
• /
• pp.414-418
• /
• 2016

This study tested the association between genetic polymorphisms of the isocitrate dehydrogenase 3, beta subunit (IDH3B) gene and economic traits in an F₂ crossbred population of Landrace × Jeju (South Korea) Black pigs. A 304-bp insertion/deletion mutation in promoter region was screened for determining genotypes of the IDH3B gene in a total of 1,105 F₂ pigs. Three genotypes (AA, AB, and BB) were identified in the founder, F₁, and F₂ populations. Association analysis showed significant differences in carcass weights (CW), backfat thicknesses in three positions of the body (4^th-5^th ribs, BF5; 11^th-12^th ribs, BF12; 13^th rib-1^st lumbar, BFL), and carcass lengths (CL) (p<0.05), but not in meat color (MC), eye muscle area (EMA), or marbling scores (MARB) (p>0.05). The F₂ IDH3B BB homozygotes showed heavier CW (80.790±0.725 kg) and shorter CL (101.875±0.336 cm) than the other genotypes (p<0.05). In addition, the BF levels between the 4^th - 5^th and 11^th - 12^th vertebrae were thicker in the carcasses of pigs with the IDH3B BB genotype than with the other genotypes (p<0.05). These results suggested that genetic variations in the IDH3B gene may serve as molecular genetic markers for improving the Landrace × Jeju Black pig crossbreeding systems.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.1
• /
• pp.1-11
• /
• 2017

Bio-oil has attracted considerable interest as one of the promising renewable energy resources because it can be used as a feedstock in conventional petroleum refineries for the production of high value chemicals or next-generation hydrocarbon fuels. Zeolites have been shown to effectively promote cracking reactions during pyrolysis resulting in highly deoxygenated and hydrocarbon-rich compounds and stable pyrolysis oil products. In this study, catalytic pyrolysis was applied to upgrade bio-oil from yellow poplar and then fuel characteristics of upgraded bio-oil was investigated. Yellow Poplar(500 g) which ground 0.3~1.4 mm was processed into bio-oil by catalytic pyrolysis for 1.64 seconds at $465^{\circ}C$ with Control, Blaccoal, Whitecoal, ZeoliteY and ZSM-5. Under the catalyst conditions, bio-oil productions decreased from 54.0%(Control) to 51.4 ~ 53.5%, except 56.2%(Blackcoal). HHV(High heating value) of upgraded bio-oil was more lower than crude bio-oil while the water content increased from 37.4% to 37.4 ~ 45.2%. But the other properties were improved significantly. Under the upgrading conditions, ash and TAN(Total Acid Number) is decrease and particularly important as transportation fuel, the viscosity of bio-oil decreased from 6,933 cP(Control) to 2,578 ~ 4,627 cP. In addition, ZeoliteY was most effective on producing aromatic hydrocarbons and decreasing of from the catalytic pyrolysis.

• Journal of Ginseng Culture
• /
• v.2
• /
• pp.71-83
• /
• 2020

College students are the potential income classes preparing for income activities and are the main consumers of the future that are very important. In order to understand the current state of ginseng-related consumption culture of young consumers, this study wanted to examine university students' attitudes toward ginseng-related products and services in the future, and to find out their purchasing status, satisfaction, and intent to purchase them. In doing so, we looked at the relative influence of the relevant variables that affect the intent of the purchase. As a result, the variables that affect college student consumers' intention to purchase ginseng-related products were shown in the order of their reliability, economy, purchasing experience, subjective interest, monthly income, monthly allowance, pride in ginseng, and age. Of these, most of the variables had positive effects, but the average monthly income, monthly allowance, and age had negative effects. In other words, the higher the reliability, economy, and self-esteem of ginseng, the higher the willingness to buy ginseng, the higher the subjective interest in ginseng, the higher the age, the lower the monthly allowance, and the lower the income, the lower the willingness to buy ginseng. To promote college students' consumption of ginseng products, it is necessary to cut prices for the younger generation, enhance the quality of the products for the younger generation, improve the taste to overcome the negative aspects of rejecting the bitter and bitter taste, and, above all, induce consumers' attention. It is also necessary to expand accessibility through the development of convenient and easy-to-eat products for young people and the expansion of sales outlets. Recently, young consumers are interested in new products they have never experienced before, products that are good to certify because of their unique design or packaging, and retro products that stimulate nostalgia in the past, so they need to promote and provide information related to consumption of ginseng products in this regard. Considering the practicality and convenience of consumers, we propose consideration of personal consumers' taste curation services, which reflect their preference for products that are convenient to carry with them in line with various living environments, and can have synergy with other products.

• The korean journal of orthodontics
• /
• v.33 no.1 s.96
• /
• pp.51-61
• /
• 2003

The purpose of this study was to evaluate the effects of a self-etching primer on the shear bond strength of orthodontic brackets and on the failure pattern of bracket-adhesive interfaces in dry or wet condition. Brackets were bonded to extracted human teeth according to one of three experimental protocols. In the Group P, teeth were etched with $37\%$ phosphoric acid. After the Transbond XT Primer was applied onto the etched surfaces, the brackets were bonded with Transbond XT(3M, Unitek, Monrovia, Calif) and light cured for 40 seconds. In the Group SD, a self-etching primer(3M, Unitek, Monrovia, Calif) was placed on the enamel for 3 seconds and gently evaporated with air, as suggested by the manufacturer. The brackets were then bonded with Transbond XT as in the Group P In the Group SW, artificial saliva was applied to the enamel surface for 10 seconds to allow complete hydration of the surface before application self-etching primer The brackets were then bonded following the procedures of Group SD. Each group was divided into 2 sub-groups(0.5h, 24h) according to debonding time. Shear bond strengths were measured by Instron universal testing machine. After debonding, the teeth and brackets were examined under scanning electron microscope and assessed with the adhesive remnant index. The result obtained were summarized as follows ; 1. The shear bond strengths were high enough to use clinically in all testing groups, but the shear bond strengths of Group SD and SW were significantly lower than Group P(p<0.05). 2. With respect to comparison of debonding time, 24h debonding samples exhibited heigher shear bond strength than 0.5h debonding samples in Group P, SD and SW(p<0.05). 3. In the self etching primer groups(Group SD and Group SW), there was no significant difference in mean shear bond strength between under dry and wet state(p>0.05). 4. There was a greater frequency of ARI score of 0 and 1 with the Group P. On the other hand, there was a higher frequency of ARI scores of 2 and 3 with Group SD and Group SW(p<0.05).

• The korean journal of orthodontics
• /
• v.28 no.1 s.66
• /
• pp.165-174
• /
• 1998

The turnover of collagen is controlled by the balance between collagen synthesis and degradation. The production of collagenase (matrix metalloproteinase-1) and its inhibitor, tissue inhibitor of matrix metallopmteinase-1 (TIMP-1) are one of the substances which regulate this balance. The periodontal ligament fibroblast plays an important role in collagen metabolism during orthodontic treatment and is believed to be an origin of the osteoblast in the alveolar bone. The collagenase secreted by the periodontal ligament fibroblast and the osteoblast initiates the bone resorption by removing the osteoid layer in the alveloar bone. The interleukin-$1{\beta}$ is secreted by the macrophage during orthodontic treatment. The present study was undertaken to assess the effect of mechanical stress and interleukin-$1{\beta}$ on the expression of collagenase and TIMP-1 in the periodontal ligament fibroblasts using reverse transcription polymerase chain reaction and immunohistochemical staining. The periodontal ligament fibroblasts were stitched by placing the $Petriperm dish^{\circledR}$ dish on the top of spheroidal convex watch glass ($5\%$ surface increase) and tented with interleukin-$1{\beta}$ (1.0 ng/ml), or treated with both of them. Treatment with mechanical stress and/or interleukin-$1{\beta}$ resulted in increased collagenase mRNA expression. The mechanical stress treated group (1.61, 1.62, 1.37 fold increase), the interleukin-$1{\beta}$, tented group (1.68, 1.60, 3.78 fold increase), the mechanical stress and interleukin-$1{\beta}$ treated group (1.89, 1.72, 5.48 fold increase) induced increases in collagenase mRNA compared with the control group after 2, 4, 8 hours respectively. But TIMP-1 mRNA expressions at experimental groups were decreased after 2, 4 hours and increased after 8 hours. The mechanical stress treated group (0.16, 0.49 fold decrease and 3.77 fold increase), the interleukin-$1{\beta}$ treated group (0.15,0.44 fold decrease and 4.46 fold increase), the mechanical stress and interleukin-$1{\beta}$ tented group (0.15, 0.69 fold decrease and 4.81 fold increase) induced changes in TIMP-1 mRNA compared with the control group after 2, 4, 8 hours, respectively. Immunohistochemical stain showed that increased collagenase and TIMP-1 staining of the mechanical stress tented group, the interleukin-$1{\beta}$ treated group, and the mechanical stress and interleukin-$1{\beta}$ treated group compared with that of the control group after 8 hours. These findings suggest that mechanical stress and interleukin-$1{\beta}$ regulate expression of collagenase and TIMP-1.

• Journal of Life Science
• /
• v.9 no.2
• /
• pp.121-126
• /
• 1999

Some attempts were made to investigate the honeydew excretion of the brown planthopper(BPH), Nilaparvata lugens Stal, biotypes in terms of instal nymph, days after emergence, macropterous and brachypterous mated and unmated female, and macropterous female with different sources fed on 60-day-old rice cultivars with different resistance genes. The feeding amount of the BPH biotypes was measured by using the honeydew excretion test. The feeding amount of fifth instar on Miryang 23 with no resistance gene was higher than that of Cheon-gcheongbyeo with Bph-1 gene by two times. Macropterous and brachypterous females showed low feeding amount at first day after emergence, but they showed high feeding amount from second days after emergence. Also the feeding amount of brachypterous female was higher than that of macropterous female. In addition, the feeding amount of BPH was in the order of nymph

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.1
• /
• pp.48-57
• /
• 2015

In a sodium-cooled fast reactor, which is a Generation-IV reactor, refueling is conducted by rotating, but not opening, the reactor head to prevent a reaction between the sodium, water and air. Therefore, an inspection technique that checks for the presence of any obstacles between the reactor core and the upper internal structure, which could disturb the rotation of the reactor head, is essential prior to the refueling of a sodium-cooled fast reactor. To this end, an ultrasound-based inspection technique should be employed because the opacity of the sodium prevents conventional optical inspection techniques from being applied to the monitoring of obstacles. In this study, a ranging inspection technique using a plate-type ultrasonic waveguide sensor was developed to monitor the presence of any obstacles between the reactor core and the upper internal structure in the opaque sodium. Because the waveguide sensor installs an ultrasonic transducer in a relatively cold region and transmits the ultrasonic waves into the hot radioactive liquid sodium through a long waveguide, it offers better reliability and is less susceptible to thermal or radiation damage. A 10 m horizontal beam waveguide sensor capable of radiating an ultrasonic wave horizontally was developed, and beam profile measurements and basic experiments were carried out to investigate the characteristics of the developed sensor. The beam width and propagation distance of the ultrasonic wave radiated from the sensor were assessed based on the experimental results. Finally, a feasibility test using cylindrical targets (corresponding to the shape of possible obstacles) was also conducted to evaluate the applicability of the developed ranging inspection technique to actual applications.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.1 no.1
• /
• pp.100-106
• /
• 1998

Purpose: Ceftriaxone, a potent parenteral third-generation semisynthetic cephalosporin is widely used for the treatment of a variety of bacterial infections in both children and adult. Review of recent data indicates that ceftriaxone treatment has been associated with the development of reversible biliary pseudolithiasis and that is thought by many to be a benign process. Despite, several reports describe patients with ceftriaxone pseudolithiasis who required cholecystectomy for presumed acute cholecystitis. In this study we evaluated the incidence, risk factors, and prognosis of gallbladder pseudolithiasis after ceftriaxone treatment. Methods: Between march, 1997 and January, 1998, any child admitted to the Children's hospital of National University of Seoul and prescribed ceftriaxone for probable or definite bacterial infection were eligible for the study. 21 of them had ultrasound examination on the 2~12 days later after the start of ceftriaxone treatment, 8 of whom documented gallbladder precipitates or pseudolithiasis during treatment by serial abdominal ultrasound. Repeat abdominal ultrasound was performed 10~80 days later after the end of ceftriaxone treatment. The children with underlying liver disease or decreased renal function were excluded in this study. Results: 1) 21 children had ultrasound examinations of gallbladder during ceftriaxone treatment and 8 (38%) of them acquired pseudolithiasis. 2) The patients who developed gallbladder pseudolithiasis were significantly older ($6.3{\pm}2.9$ yr. vs $2.2{\pm}3.1$ yr.)(p<0.05), and older than 24 months were probably the significant risk associated with this phenomenon (p<0.05). However, no significant differences in sex, type of infection, fasting, and ceftriaxone treatment regimen (dose, duration of therapy). 3) The abnormality found on gallbladder ultrasonography was a strikingly hyperechogenic material with post-acoustic shadowing in 5 patients without post-acoustic shadowing in 3 patients 4) Follow up of gallbladder ultrasound was performed in 6 patients after cessation of ceftriaxone treatment. Sonographic abnormalities completely resolved within 14 days post cessation of therapy in 2 patients; 30 days, 1 patient; 80 days, 3 patients. Conclusions: We suggest that routine abdominal ultrasound should be considered in all children who received high dose ceftriaxone in more than 24 months of age and developed hepatobiliary symptoms during or just after ceftriaxone treatment.