• Title/Summary/Keyword: 성형 능력

Search Result 93, Processing Time 0.031 seconds

점진적 팽창단조법에의한 대형 노즐형제품의 성형공정 개발

  • 박치용;양동열;이경훈;은일상
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 1993.04b
    • /
    • pp.33-37
    • /
    • 1993
  • 연결부를 지닌 대형의 노즐형상 제품은 대형산업기기에서 용기의 일부 및 추진체 및 인공위성 발사 대등에서 쓰이는 제품으로 목적하고자 하는 최종 조립품의크기에 따라 제품자체의 지름이 1m 에서 수m 에 이르는 대형으로 제작된다. 대형노즐형 제품은 제품 자체의 강도, 정확한 치수 및 소요재료의 다수등도 중요한 요소이나, 가공하중의 크기에 따라 다르지만 제품을 만들기 위해서는 수만톤을 필요로하기 때문에 제품제조의 가능여부가 성형기의 능력에 의존하게 된다. 본 연구는 비교적 소형장비로써 대형 노즐형단조 품의 제작이 가능한 새로운 성형공정을 개발하는데 그 목적이 있으며 공정개발은 비교적 소형 장비로써 대형단조품의 제작이 가능하도록 하는데 촛점을 맞추고서 이루어 졌다. 이를 위해 여러가지 가능한 방법 들을 제안하고, 각각의 공정 방법들에 대해서 Plasticine 모델 시험을 통하여 소성유동에 의한 성형성과 하중을 검토한 후에 국내에서 사용가능한 장비 및 하중능력, 그리고 성형성 등을 고려하여 적절한 공정방법을 선택하였다. 선택된 공정에서 점진적 팽창단조를 위한 예비 성형체의 결정 및 공정변수의 결정등을 납 모델링실험을 행하여하였으며 실재 재료의 축소모형실험을 수행하여 공정을 확인 하였다.

Improvement of A Rice Seed Pelleting Machine for Direct Seeding in Rice Cultivation (직파용 벼 펠렛종자 제조장치 성능 개선 연구)

  • 유대성;유수남;최영수
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 2002.02a
    • /
    • pp.35-41
    • /
    • 2002
  • 본 연구는 기존 벼 펠렛종자 제조장치의 제조성능 및 제조 벼 펠렛종자 품질향상을 위하여 펠렛재료 공급부, 성형부, 펠렛종자 배출부를 개선 설계 제작하여 그 성능과 제조 벼 펠렛종자 특성을 구명함으로써 직파용 벼 펠렛종자 대량생산을 위한 제조장치 개발의 기초 자료를 얻고자 수행하였으며 그 주요 결과를 요약하면 다음과 같다. 펠렛재료의 일정한 공급과 펠렛재료가 성형 홈으로부터의 이탈하는 것을 줄이고, 펠렛종자의 완전한 배출이 가능하도록 한 벼 펠렛종자 제조장치를 설계·제작하였으며, 벼 펠렛종자 제조장치를 상토 종자혼합비, 성형롤의 회전속도에 따라 실험한 결과 벼 펠렛종자 제조 능력은 성능 개선 전의 펠렛종자 제조장치에 비하언 약 1.7배 향상된 제조능력을 보였으며, 성형률은 최대 약 89 %로 나타나 개선 전의 71%에 비해 18 %정도 성형률이 향상되었다. 그러나, 벼 종자손실률은 약 24% ∼ 49%로 거의 비슷한 수준인 것으로 나타났다. 제조된 벼 펠렛종자의 특성을 분석한 결과 펠렛종자의 구형률은 99.1%로 거의 구형으로 제조됨을 알 수 있었으며, 무게는 제조 직후에는 약 1.70 g, 완전 건조 후에는 1.31 g으로 나타났고, 직경은 약 12.03 mm에서 건조 후 11.53 mm로 축소되었다. 개선 전에 비해 직경과 무게가 약간씩 증가한 것으로 나타났다. 이러한 결과는 재선된 제조장치에서 펠렛재료가 성형롤의 성형 홈에 압축 공급되고, 펠렛재료의 손실도 적었기 때문으로 판단된다. 제조된 한 개의 벼 펠렛종자 내에 포함된 완전 벼 종자의 개수는 상토 종자혼합비가 커질수록 성형롤의 회전속도가 낮을수록 많아지는 것으로 분석되었으며, 모두 펠렛종자 당 평균 약 3 개 이상의 완전 벼 종자를 포함하고 있는 것으로 나타났다. 개선 전에 비하여 펠렛종자 내에 포함된 평균 완전 종자수도 증가하였으며, 3개 이상 완전 종자를 포함한 펠렛종자의 비율도 증가하여 유압에 의한 펠렛재료 공급과 성형롤의 개선효과가 있었던 것으로 보인다. 음지 건조 후 벼 펠렛종자의 압축강도는 약 132 N ∼ 152 N으로 조사되었으며, 개선전에 비하면, 약 30 %가 증가한 것으로 나타났다. 출아율 실험 결과 상토 종자혼합비 6 : 1, 성형롤 회전속도 7 rpm에서 건답직파는 100%, 답수직파는 97 %의 출아율을 보여 만족할 만한 결과를 얻었으나, 그 외의 경우는 거의 90 % 이하의 출아율을 보여 출아율을 높이기 위한 방안이 필요한 것으로 보인다. 본 연구의 벼 펠렛종자 제조장치의 적정운전 조건은 제조된 벼 펠렛종자의 특성과 출아율을 고려해 볼 때 상토 종자혼합비 6 : 1, 성형롤 회전속도 약 7 rpm으로 판단되며, 이 때 제조능력은 시간당 약 65 Kg(펠렛종자 약 39,000 개), 성형률 약 87 %, 종자손실률은 약 30 %, 펠렛종자 내 평균 종자수는 약 5.5 개, 완전 벼 종자 3개 이상 포함 펠렛종자 비율은 약 100 %가 될 것으로 보인다.

  • PDF

THE EFFECT OF DIFFERENT FLUTE DESIGN AND TORQUE-CONTROLLED MOTOR ON THE SHAPING ABILITY OF SIMULATED RESIN ROOT CANALS (엔진의 토크 조절 능력과 니켈-티타늄 파일의 삭제 성향이 근관 성형에 미치는 영향)

  • Roh, Hyoung-Mee;Huh, Bock;Kim, Hyeon-Cheol;Park, Jeong-Kil
    • Restorative Dentistry and Endodontics
    • /
    • v.30 no.6
    • /
    • pp.486-492
    • /
    • 2005
  • The purpose of this study was to compare the shaping ability of the two different Ni-Ti file systems and the two different engine systems in simulated canals. A total of four groups of each 10 were tested. Each group was instrumented with HeroShaper and Endo-Mate2 (Croup HE), HeroShaper and Tecnika (Croup HT), ProFile and Endo-Mate2 (Group PE), and ProFile and Tecnika (Croup PT). Canal preparation time was recorded. The images of pre- and post- instrumented root canals were scanned and superimposed. The amounts of increased width and centering ratio were measured and calculated at apical 1, 3 and 5mm levels. These data were statistically analyzed with one-way ANOVA and Duncan's multiple range test The results of this study were as fellows ; 1. Canal preparation time of HT group was the shortest (p<0.05). 2. The amount of increased canal width in HE group was significantly larger than PT group at apical 1mm level (p<0.05) At apical 3mm level, PT group was significantly smaller than other groups (p<0.05). At apical 5mm level, PE group was significantly larger than PT group (p<0.05). 3. The amount of centering ratio in HE group was significantly larger than other groups (p<0.05). At apical 5mm level, HT group was significantly larger than PE group and PT group (p<0.05). Under the condition of this study, torque-controlled endodontic motor is safer than no torque controlled motor, especially when the active file is used.

Influence of Soil Properties on Erodibility of Fine-grained Soils (세립토의 침식능에 대한 토질정수의 영향)

  • 곽기석;이주형;박재현;정문경;배규진
    • Journal of the Korean Geotechnical Society
    • /
    • v.20 no.8
    • /
    • pp.89-96
    • /
    • 2004
  • Many researches have been devoted to developing a model fur bridge scour analysis which can consider both of the erosive potential of flowing water and the relative ability of the soil to resist erosion. The scour rate apparatus that can quantify the erosion rate of the soil has been developed by virtue of the extensive efforts. The scour rate tests were performed on 3 types of the remolding clay samples using the scour rate apparatus. The erosion characteristics of the fine-grained soil samples according to the variation of the remolding loads are examined and the correlation between the soil properties and erosion rates is also analyzed. The results of the tests and analyses show that the soil properties, especially the dry unit weight and the shear strength of the soil have great influence on the erosion characteristics.

Development of filter using illite from Young-dong (영동산 일라이트를 이용한 필터 개발)

  • 김상순;구경완;황재효;임경천;남은정;한위생
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2000.11a
    • /
    • pp.425-428
    • /
    • 2000
  • 본 논문에서는 영동산 일라이트가 갖는 기능성을 이용하여 정수기용 필터로써의 가능성을 검토한다. 대장균 실험을 통하여 항균성을 평가하였고, 여러 가지 중금속(Zn, Pb, Cu, Cd, Fe$^{2+}$)의 흡착능력을 평가하였다 정수기 필터재료로 사용하기 위한 성형조건을 실험하였고, 물 필터하우징에 성형된 illite ceramic을 충진하여 물을 정수 처리하여 버섯 재배에 적용하였다. 결과적으로 항균성은 white-yellow-red 순이었고 중금속흡착능력은 원소에 따라서 yellow가 white보다 크게 나타났고, 이에 착안하여 버섯재배에 적용한 결과 수율 향상에 크게 기여하는 것으로 나타났다. 본 논문에서 illite ceramic이 필터재료로서의 가능성을 나타내고 이를 개발, 보고 하고자 한다.

  • PDF

Analysis of DOA Estimation and Adaptive Beam-forming of MIMO between Linear-circular Array Antennas (선형-원형배열 안테나에 따른 MIMO의 DOA 추정과 적응 빔성형 분석)

  • Yang, Doo-Yeong;Lee, Min-Soo
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.12 no.6
    • /
    • pp.2777-2784
    • /
    • 2011
  • In this paper, DOA(direction of arrival) of multiple incident signals received from linear array antenna and circular array antenna, which is based on nonparametric estimation algorithm, and adaptive beam-forming algorithm are studied and analyzed. In nonparametric estimation algorithm, we minimize a regularized objective function for finding a estimate of the signal energy as a function of angle, using nonquadratic norm which leads to supper resolution and noise suppression. And then, DOA is estimated by the signal and noise spatial steering vector, and adaptive beam-forming pattern is improved by weight vectors obtained from the spatial vector. Especially, the discrimination ability of DOA and the adaptive beam-forming ability according to antenna array methods and the number of array elements are compared and considered.

A COMPARISON OF SHAPING ABILITY OF THE THREE ProTaper® INSTRUMENTATION TECHNIQUES IN SIMULATED CANALS (ProTaper®의 세 가지 사용방식에 따른 성형능력 비교)

  • Kim, So-Youn;Park, Jeong-Kil;Hur, Bock;Kim, Hyeon-Cheol
    • Restorative Dentistry and Endodontics
    • /
    • v.30 no.1
    • /
    • pp.58-65
    • /
    • 2005
  • The purpose of this study was to compare the shaping ability of the three $ProTaper^{(R)}$ instrumentation techniques in simulated canals. Thirty resin blocks were divided into 3 groups with 10 canals each. Each group was instrumented with manual $ProTaper^{(R)}$ (Group M), rotary $ProTaper^{(R)}$ (Group R), and hybrid technique (Group H). Canal preparation time was recorded. The images of pre- and post-instrumented root canals were scanned and superimposed. The amounts of canal deviation, total canal width, inner canal width, outer canal width and centering ratio were measured at apical 1, 2, 3, 4, 5 and 6 mm levels 1. Canal preparation time was the shortest in R group (p < 0.05). 2. The amounts of total canal width in R group was generally larger than the other groups, but no significant differences were observed except at the 1, 3 mm levels (p > 0.05) .3. The amounts of inner canal width in R group was larger than M group at the 1 mm level and H group was larger than R group at the 6 mm level (p < 0.05). The amounts of outer canal width in R group was larger than H group only at the 1 mm level (p < 0.05). 4. The direction of canal deviation in H, R group at the 1, 2, 3 mm levels was outward and that in M group at the 1, 2 mm levels was inward. The amounts of canal deviation in H group was larger than R group at the 6 mm level (p < 0.05). 5. The amounts of centering ratio in H group was larger than R group at the 6 mm level (p < 0.05).

Reconfigurable FIR Filter Design Using Partial Reconfiguration (부분 재구성 방법을 이용한 재구성형 FIR 필터 설계)

  • Choi, Chang-Seok;Lee, Han-Ho
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.44 no.4
    • /
    • pp.97-102
    • /
    • 2007
  • This paper presents our implemented, synthesized and tested on demand and partial reconfiguration approaches for FIR filters using Xilinx Virtex FPGAs. Our scope is implementation of a low-power, area-efficient autonomously reconfigurable digital signal processing architecture that is tailored for the realization of arbitrary response FIR filters on Xilinx Virtex4 FPGAs. The implementation of design addresses area efficiency and flexibility allowing dynamically inserting and/or removing the partial modules to implement the partial reconfigurable FIR filters with various taps. This partial reconfigurable FIR filter design shows the configuration time improvement, good area efficiency and flexibility by using the dynamic partial reconfiguration method.

A Study on Practical Tool Education for Improving Injection Molding Quality (사출성형품질 개선을 위한 실무금형교육에 관한 연구)

  • Shin, Ju-kyung
    • Journal of Practical Engineering Education
    • /
    • v.8 no.2
    • /
    • pp.121-128
    • /
    • 2016
  • In injection molding process, the appearance quality issue occurs in most injection molded article. One of thermal designs for the mold was performed by increasing the cavity wall temperature with being as uniform as possible in any position. On the basis of the practical evaluation, the cavity wall temperature and finishing machined cavity surface under the optimum processing conditions are the most significant factors to avoid the appearance issue on the plastic part for a good cosmetic quality. Also, the wrong choice of gate type and location can have a considerable effect on the quality of a molded part and it's so important to keep the correct runner balance from each cavity. We've proposed the education training model of the practical tool technology course for the field oriented education to improve practical tool technology ability and optimized tooling design for injection molding quality which can be performed at the workplace substantially.

Development of A Rice Seed Pelleting Machine for Direct Seeding in Rice Cultivation (격파용 벼 펠렛종자 제조장치 개발)

  • 박종수;유수남;최영수;유대성
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 2002.02a
    • /
    • pp.29-34
    • /
    • 2002
  • 주요 결과를 요약하면 다음과 같다. 가. 벼 종자, 상토, 흔합 접착액 등 펠렛재료를 스크류 컨베이어에 의해 회전 성형롤에 공급, 압축성형 배출함으로써 직경 12 mm의 구형 벼 펠렛종자를 제조할 수 있는 벼 펠렛종자 제조장치를 설계·제작하였다. 나. 설계·제작된 벼 펠렛종자 제조장치의 제조능력은 시간 당 약 13,000 개 ∼ 37,000 개인 것으로 나타났고 이때 성형률은 약 61% ∼ 71%였다. 하지만 벼 종자 손실률은 약 17% ∼ 48%로 매우 큰 것으로 나타나, 펠렛재료의 손실과 종자손상을 줄이기 위한 성형롤 및 펠렛재료 공급장치의 개선이 필요한 것으로 보인다. 다. 제조된 펠렛종자의 무게는 제조 직후에는 1.66 g, 완전 건조 후에는 약 1.3 g으로 나타났으며, 제조된 펠렛종자의 직경은 약 12.0 mm에서 건조 후 약 11.2 mm로 축소되었다. 라. 제조된 한 개의 벼 펠렛종자 내 포함된 벼 종자의 개수는 상토와 벼 종자의 혼합비에 따라 다르게 나타났는데 혼합비 6 : 1에서 펠렛종자 당 종자 개수는 4.1 립, 혼합비 7 : 1에서 3.6 립, 그리고 혼합비 8 : 1에서는 3.1 립으로 나타났다. 마. 건조 후 벼 펠렛종자의 압축강도를 측정한 결과 건조기를 이용한 경우는 118 N ∼ 137 N, 음지 건조의 경우는 88 N ∼ 108 N으로 조사되었으며, 대체적으로 운반 및 파종 과정에서의 취급성은 문제가 없을 것으로 보인다.

  • PDF