• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.553-553
• /
• 2000

The application as the parts of an automobile, using the property of GMT-Sheet, is increasing. In order to exchange the parts of an automobile for GMT-Sheet, at first, the establishment and joining problem of exact joining strength must be determined. We have studied it using composites which is not same each other fiber oriented condition so as to determine joining strength and joining condition of GMT-Sheet. h this study, the result of experiment of forming condition concerned joining problem of GMT-Sheet is this ; joining efficiency of of GMT-Sheet, increases as lap joint length L increases. Increase of compression ratio causes decrease of joining efficiency after of GMT-Sheet joining. In the viewpoint of recycling, randomly oriented composite of GMT-Sheet is desirable more than unidirectional oriented composite. We has better design the structure so as not to occur to stress centralizatien on the joining part.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.3
• /
• pp.37-43
• /
• 2006

Six types of hat stiffened composite panels were manufactured with different bonding methods and stiffener section shapes and compression testing of these panels were performed. The panels showed similar behaviors in bucking and postbuckling region before a skin-stiffener separation failure occurred. Although all the separation failures occurred at the same locations of stiffener flanges close by skin buckling crests, the separation loads, separation failure growth behaviors and final collapse loads were different with respect to bonding methods and stiffener section shapes. As the separation failure initiated early and propagated larger area, collapse loads and structural efficiency of the panels decreased.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1558-1563
• /
• 2010

This paper describes a study on algorithm for the development of machine vision system as well as the inspection of automobile's plastic part locking lever to replace a human worker's eye inspection. Before developing the machine vision system based on the PC, the purpose of this research is to develop the algorithm to decide whether a product is a good/bad one in real time inspection. NI-LabVIEW software is used in the inspection method and an inspection program is developed using LabVIEW Vision image functions. The inspection program was built and validated to help the system operator set up the inspection area and change the criteria number in the program.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.29-29
• /
• 2014

최근 화석에너지 고갈 및 에너지 수요의 폭발적 팽창을 해결하기 위하여 경량화와 내마모 측면에서 고효율 시스템을 적용한 자동차 및 각종 성형 기기들이 개발되고 있다. 특히 장치의 고성능화라는 요구조건을 충족시키기 위해서는 금속가공산업에서 표면개질의 중요성이 부각되고 있다. 이러한 표면개질에는 일반적으로 표면의 성질을 개선하여 마모(abrasion) 및 국부 압력(local stress) 또는 피로(fatigue), 마식(wear and corrosion)에 견디게 하여 부품의 수명증대와 제품의 소형화에 기여하고 있다. 이러한 표면개질법에는 경질의 물질을 표면에 코팅시켜 재료표면의 특성을 향상시키는 방법과 금속의 표면에 다른 원소를 침투 및 확산시키는 방법으로 나눌 수 있다. 확산방법으로 침탄, 질화, 보로나이징, 크마이징 처리 방법 등이 있다. 상업적으로 가장 많이 사용되는 표면 개질법은 침탄기술로서, 고온에서 짧은 시간내에 물성 향상이 가능하지만, 강의 변태점 이상의 온도에서 진행됨으로서, 변형에 따른 문제가 발생되어 후처리를 필요로 하는 문제점을 가지고 있다. 반면, 질화법은 변태점 이하의 저온에서 철강 표면에 N을 침투시켜 강을 경화시키는 특징을 가진다. 변형이 적고 질소원자가 강내에 침투함으로 인해 내마모성, 내피로성, 내식성 등의 물리적 성질을 향상시키는 점에서 유리하여 각종 정밀 부품 및 자동차 부품, 금형 등에 많이 사용된다. 또한, 경도 향상 및 결정구조의 영향으로 코팅처리시 모재와 코팅 층의 밀착력 향상을 가져오면 이러한 이유로 코팅 층의 하지 층으로써 각광 받고 있다. 본 발표에서는 플라즈마 질화의 이해를 높이기 위해 관련 기술에 대한 전반적인 소개와 향후 플라즈마 질화 기술의 적용이 기대되는 침탄대체 적용 가능 부품, 침류질화 기술, PECVD 공정과의 접목 등 산업적은 응용 측면에서 응용 분야에 대한 소개를 진행하고자 한다.

• Journal of Biomedical Engineering Research
• /
• v.25 no.1
• /
• pp.27-32
• /
• 2004

In this study, method of PMMA injection is suggested for vertebroplasty in patients with osteoporotic compression fracture. The finite element analysis is used to investigate the vertebroplasty quantitatively. In order to improve previous works with simplified geometry of vertebral body more exact geometry has been constructed from CT image data with 1m thickness. An ideal method of PMMA delivery, with respect to location and amount of injectate, into vertebral body has been suggested based on evaluation of the insert positions and the insert shapes of injected PMMA. It is shown that vertebral body can be compensated most efficiently when PVIMA is highly concentrated on the top-front of trabecular bone of compressed vertebra.

• Journal of Digital Convergence
• /
• v.14 no.9
• /
• pp.423-429
• /
• 2016

Character customization means a series of processes to build a characters. Mobile character customizing system is very scarce than Online RPG system qualitatively or quantitatively. In this paper, I will propose some effective elements about A DIY character system that must be suitable for the mobile environment system. The reasons why Select System is mainly used as the customizing system in RPG are as follows; First, the screen of a mobile device is small; Second, it is due to the space-time characteristics with which mobile games are played. In the middle of playing a game, a customizing system should be adopted in order for players not to feel bored. In addition, avatar's costumes should be continually updated.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.2
• /
• pp.111-119
• /
• 2001

The application as the parts of an automobile, using the property of GMT-Sheet, is increasing. In order to exchange the parts of an automobile for GMT-Sheet, at first, the establishment and problem of exact joining strength must be determined. We have studied it using composites which is not same each other fiber oriented condition so as to determine joining strength and joining condition of GMT-Sheet. In this study, the result of experiment of forming condition concerned joining problem of GMT-Sheet is this; joining efficiency of GMT-Sheet, increases as lap joint length L increases. Increase of compression ratio causes decrease of joining efficiency after of GMT-Sheet joining. In the viewpoint of recycling, randomly oriented composite of GMT-Sheet is desirable more than unidirectional oriented composite. We has better design the structure so as not to occur to stress centralization on the joining part.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.1109-1112
• /
• 2008

Concrete structure is recognized as the universal structuring material for its outstanding formability, economic efficiency, and strength development. However, as the ageing of field workers and the deficiency of skilled workers due to evasions from 3D business have recently become the major issues of the industry in Korea and as the materials are becoming more diversified and complicated for today's concrete structures are becoming higher, larger, and specialized, the need for practicality of construction work based on new technology and new method has greatly increased. Therefore, the overall condition of today's construction business requires researches and developments on the high fluidity concrete for higher construction efficiency and quality improvements. With this reason, this study investigated study development tendency and development situation of the high fluidity concrete, arranged experiment performance, and domestic or international specification used in performance valuation of the high fluidity concrete.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1192-1194
• /
• 2005

선형전동기는 일반적으로 회전형 전동기를 잘라 평면에 펼친 다음 회전형 전동기와 같이 구동할 경우 직선운동을 하는 전동기이다. 회전형 전동기에 비해서 효율특성을 다소 떨어지지만 직선운동을 위한 전동기가 필요할 경우에는 많이 사용하고 있는 실정이며 회전형의 경우 고정자와 회전자의 극간격을 유지하기 위해서 축을 중심으로 구동할 수 있게 제작하고 있는 실정이다. 그러나 선형전동기의 경우 정확한 극간경의 유지를 위해서 LM guide를 사용하는 것이 일반적이며 이로 인해서 고정자회 이동자 사이의 정확한 간격을 유지할 수 있게 된다. 또한 자속의 흐름과 이동자의 이동방향에 따라 일반적으로 선형전동기를 구분하는데 자속의 흐름으로 인해 만들어지는 평면과 이동자가 움직이는 방향이 같은 면 상에 있으면 종자속이라고 하고 횡방향으로 놓여질 경우 횡자속 선형전동기라고 부른다. 본 연구에서는 횡자속 선형전동기에서 발생되는 추력특성을 고려하여 선형액추에이터를 설계할 경우 발생되는 추력읜 불균일성에 대한 내용으로 전동기의 추력 특성 파형에 따른 성형 액추에이터의 동특성을 알아보았다. 특히 액추에이터에서 발생되는 공진특성을 기준으로 불때 같은 에너지로 약 2배의 동특성을 얻을 수 있었고 반력은 거의 같은 특성을 얻을 수 있었다.

• Resources Recycling
• /
• v.13 no.5
• /
• pp.23-27
• /
• 2004

In this study, experimental work was performed to mold tensile specimens by using the injection molding machine. Melt temperature, mold temperature and the mixed ratio of recycled resin were selected as processing parameters for studying the effect of those conditions on the shrinkage, weight, absorption, and tensile strength of molded parts. As a result, the shrinkage was increased according to the higher mold and melt temperature and it was more sensitive to the change of mold temperature. On the other hand, the weight of molded parts was decreased due to the increment of mold and melt temperature. Tensile strength was increased with mold and melt temperature, and it was also easy to change by mold temperature.