• Composites Research
• /
• v.23 no.6
• /
• pp.61-66
• /
• 2010

In this paper, the variation of mechanical properties of T800 carbon/epoxy composites according to the forming pressure, which was referred to previous studies on a filament winding process, were investigated. The specimens of all the tests were fabricated by an autoclave de-gassing molding process controlling forming pressure (absolute pressures of 0.1MPa, 0.3MPa, 0.7MPa including vacuum) and water jet cutting after fabricating composite laminates. Various tensile tests were performed for in-plane properties and interlaminar properties were also measured by using Iosipescu test jig. Fiber volume fraction was measured to correlate the property variation and the forming pressure. This properties are expected to be utilized in the design of Type III pressure vessel for hydrogen vehicles which uses the same carbon fiber (T800 carbon fiber) for the filament winding process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7729-7735
• /
• 2015

As plastic injection mold parts is suitable system mass production making mold. So thick steering wheel parts is desirable to carry out gas injection molding. Gas injection mold is skill to inject nitrogen gas postfilling melting raw material into mold. Gas injection mold have many advantage like retrenchment of material cost, upgrading the guality. etc. It was decided gate position to minimize warpage of parts analysis injection mold process using mold flow software and incase doing gas injection mold using normal p.p material. it occur big warpage. so it is object minimizing warpage of injection parts to change p.p material containing mineral 18% and removing fingering phenomenon trouble as changing gate position. Also in case carrying out gas injection mold, I did comparison and analysis to grasp shape flow in gas setting a standard gate after flowing in raw material. Through this study, I found out changing of thickness by parts shape and it can occur warpage of parts by plastic material even though it carry out gas injection mold and it had a direct influence on trouble of parts by gate position.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.04a
• /
• pp.270-273
• /
• 1999

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.04a
• /
• pp.278-281
• /
• 1999

• 기계와재료
• /
• v.13 no.2 s.48
• /
• pp.93-103
• /
• 2001

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.29-34
• /
• 2002

주요 결과를 요약하면 다음과 같다. 가. 벼 종자, 상토, 흔합 접착액 등 펠렛재료를 스크류 컨베이어에 의해 회전 성형롤에 공급, 압축성형 배출함으로써 직경 12 mm의 구형 벼 펠렛종자를 제조할 수 있는 벼 펠렛종자 제조장치를 설계·제작하였다. 나. 설계·제작된 벼 펠렛종자 제조장치의 제조능력은 시간 당 약 13,000 개 ∼ 37,000 개인 것으로 나타났고 이때 성형률은 약 61% ∼ 71%였다. 하지만 벼 종자 손실률은 약 17% ∼ 48%로 매우 큰 것으로 나타나, 펠렛재료의 손실과 종자손상을 줄이기 위한 성형롤 및 펠렛재료 공급장치의 개선이 필요한 것으로 보인다. 다. 제조된 펠렛종자의 무게는 제조 직후에는 1.66 g, 완전 건조 후에는 약 1.3 g으로 나타났으며, 제조된 펠렛종자의 직경은 약 12.0 mm에서 건조 후 약 11.2 mm로 축소되었다. 라. 제조된 한 개의 벼 펠렛종자 내 포함된 벼 종자의 개수는 상토와 벼 종자의 혼합비에 따라 다르게 나타났는데 혼합비 6 : 1에서 펠렛종자 당 종자 개수는 4.1 립, 혼합비 7 : 1에서 3.6 립, 그리고 혼합비 8 : 1에서는 3.1 립으로 나타났다. 마. 건조 후 벼 펠렛종자의 압축강도를 측정한 결과 건조기를 이용한 경우는 118 N ∼ 137 N, 음지 건조의 경우는 88 N ∼ 108 N으로 조사되었으며, 대체적으로 운반 및 파종 과정에서의 취급성은 문제가 없을 것으로 보인다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2002.05a
• /
• pp.89-89
• /
• 2002

• 기계와재료
• /
• v.4 no.3 s.13
• /
• pp.63-73
• /
• 1992

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1992.05b
• /
• pp.30-30
• /
• 1992

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1992.05b
• /
• pp.75-75
• /
• 1992