• Title/Summary/Keyword: 성장지연

Search Result 564, Processing Time 0.021 seconds

A model of fatigue crack growth based on plastic stretch at the crack tip (균열선단의 소성스트레치를 이용한 피로균열성장모델)

  • Ju, Yeong Sik;Kim, Jae Hun
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.31 no.3
    • /
    • pp.15-22
    • /
    • 2003
  • The fatigue crack growth model is derived and the retardation model is proposed. The fatigue crack growth model considers the residual plastic stretch on the crack surface which results from the plastic deformation at the tip of fatigue crack. The fatigue crack growth rate is calculated by using the cumulative fatigue damage and plastic strain energy in the material elements at the crack tip. This model gives the crack growth rate in reasonable agreement with test data for aluminum alloy AL6061-T651 and 17-4PH casting steel. The fatigue crack growth retardation model is based on the residual plastic stretch produced from a tensile overload which reduced the plastic strain range of the following load cycles. A strip-yield model of a crack tip plasticity is used for the calculation of a plastic zone size. The proposed retardation model characterized the observed features and delayed retardation of the fatigue crack growth under tensile overload.

Hematologic Characteristics of Intrauterine Growth Restricted Small for Gestational Age Infants (자궁 내 성장지연으로 인한 부당 경량아의 혈액학적 특징)

  • Kim, Soon-Ju;Cho, Il-Hyun;Cho, Yeon-Soo;Youn, Young-Ah;Lee, Ju-Young;Lee, Hyun-Seung;Lee, Jung-Hyun;Sung, In-Kyung;Kim, So-Young
    • Neonatal Medicine
    • /
    • v.18 no.2
    • /
    • pp.248-256
    • /
    • 2011
  • Purpose: Intrauterine growth retardation (IUGR) is the term used to designate a fetus that has not reached its growth potential. However it is difficult to make a distinction between infants who are constitutionally small and growth restricted small. In the present study, we focused on the clinical characteristics and the hematologic value in small for gestational age (SGA) infants and discussed how to distinguish intrauterine growth restricted infants from constitutionally small infants. Methods: SGA infants that did not have any other risk factors for IUGR in the medical record except maternal hypertension (HTN) and diabetes mellitus (DM) and born at the Seoul St Mary's Hospital and Yeouido St Mary`s Hospital from January 2007 to July 2010 were included. The frequency of IUGR is higher in the pregnancy with medical problem, and in preterm infants. Therefore, the data was categorized by maternal disease and gestational age. We assessed the clinical data and the hematologic value. Results: The leukocyte count and the platelet count were lower in the SGA with maternal HTN group and the preterm SGA group. There was no difference in the clinical data and the prognosis resulted from maternal HTN and maternal DM. However, the hematologic difference was not found in the categorization of the preterm SGA group as maternal diasease. Conclusion: The results of this study showed that it is possible the low leukocyte count and the low platelet count are the characteristic hematologic features in growth restricted small for gestational age infants.

Predicting Factors of Developmental Delay in Infant and Early Children (일 지역 보건소 내원 영유아의 발달지연의심 예측요인)

  • Ju, Hyeon-Ok;Park, Yu-Kyung;Kim, Dong-Won
    • Child Health Nursing Research
    • /
    • v.19 no.1
    • /
    • pp.12-20
    • /
    • 2013
  • Purpose: The purpose of this study was to investigate factors associated with suspicious developmental delay in infants and early childhood. Methods: Participants were 133 infants, aged from birth to 6 years old and their mothers, who were being seen at 16 Public health centers in B city. Korean Denver II was used to test infant development. ${\chi}^2$-test, Fisher's exact test and multiple logistic regression were used with SPSS 19.0 to analyze data. Results: Of participant infants, 7.5% were below the 3rd percentile for the weight percentile, 8.4% is a weight curve that crosses more than 2 percentile lines on the growth charts after previous achievement, and 9.8% had suspicious developmental delay according to Korean Denver II. Further the predictive factors related to suspicious development delay in the children were decrease of weight percentile (Odds Ratio [OR]=6.69, Confidence Interval [CI])=1.22-36.45), low economic state (OR=6.26, CI=1.50-26.00), and development delay perceived by their mothers (OR=4.99, CI=1.24-20.06). Conclusion: It is necessary to build a government level system to follow management of development of infants and children from the time of birth. Especially, it is necessary to develop a program for children in low income families.

A Study on Fatigue Crack Growth Retardation Phenomena of Al 7075--T6 Alloy under Multiple overload(I) (다중 과하중에 의한 A1 7075-T6 합금의 피로균열 성장지연현상에 관한 연구)

  • 이택순;이유태
    • Journal of Ocean Engineering and Technology
    • /
    • v.6 no.1
    • /
    • pp.96-104
    • /
    • 1992
  • Aircraft structures and engineering structures are always subject to variable amplitude loads. Variable amplitude loads include some kind of loading history; for example, constant amplitude load, single peak overload and block overload etc. Crack growth under variable amplitude loading exhibits retardation effect. In this study, the 4 point bending fatigue test was performed by hydrolic servo fatigue testing machine on 7075-T6 Al-alloy. The retardation effect of overload ratio and numbers of overload cycle was quantitatively studied. 1) Change of retardation effect against increment of overload ratio is more evident when the multiple overload is applied than single overload is done. 2) The number of overload cycle is very important factor about the crack growth retardation effect when the overload ratio is more than 1.75; that is not when the overload ratio is less than 1.75. 3) Overload affected zone size increased gradually by increment of crack growth retardation effect. 4) Crack driving force is more greatly reduced when the crack tip branched off two direction than it sloped to one direction.

  • PDF

CASE REPORTS RUSSELL-SILVER SYNDROME (증례 보고 : Russell-Silver Syndrome)

  • Lee, Jin;Jang, Ki-Taeg;Kim, Chong-Chul
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.29 no.1
    • /
    • pp.51-56
    • /
    • 2002
  • Russell-Silver syndrome is a type of intrauterine growth retardation, characterized by short stature noted at birth, hemiatrophy or asymmetry, variation in sexual development and other abnormalities, including cafe-aulait pigmentation and clinodactyly. Facial features commonly associated with this syndrome are a small triangular face, decreased facial height, down-turned corners of the mouth(shark's mouth), a small mandible, and occasionally asymmetry. The major intra-oral features of the syndrome that have been reported are a high-arched palate, delayed tooth eruption, microdontia, hypodontia, and crowding. These cases were diagnosed at birth as Russell-Silver syndrome by clinical features such as prenatal growth retardation, short stature, low body weight, et al., and have been treated with growth hormone. The purpose of this paper is to report the dental findings of two patients and review the pertinent literature through the two cases.

  • PDF

Effect of Low Temperature and Single Overload on Fatigue Crack Growth Behavior of Cr-Mo Steel Weldments (Cr-Mo강 용접부의 피로균열 성장거동에 미치는 저온도와 단일과대하중의 영향)

  • Lim, Jae Kyoo
    • Journal of Welding and Joining
    • /
    • v.14 no.2
    • /
    • pp.79-89
    • /
    • 1996
  • 일정진폭하중과 과대하중비 2.5의 단일 인장과대하중에 의한 4140강 용접부 의 피로균열성장거동을 실온과 -45.deg.C의 저온에서 피로시험과 파면관찰을 통하여 고찰하였다. 이때, 용접부 미시조직의 영향을 평가하기 위해 모재(parent metal), 열영향부(as-welded HAZ), 열처리된 열영향부(PWHT HAZ)로 나누어 응력비 0과 0.5로 CT시험편을 이용하여 피로시험을 실시하였다. 피로균열성장거동은 재료의 미시조직과 온도변화보다는 응력비에 크게 영향을 받았으며, 단일 과대하중에 의한 피로균열성장 지연효과가 모든 재료에서 상당히 크게 나타났다. 전자현미경에 의한 피로파면 관찰 결과, 실온에서는 연성의 스트라이에이숀과 -45.deg.C에서는 의벽개파면과 같은 피로 균열성장거동을 나타내고 있다.

  • PDF

Comparison of predicted adult heights measured by Bayley-Pinneau and Tanner-Whitehouse 3 methods in normal children, those with precocious puberty and with constitutional growth delay (정상 소아, 성조숙증 및 체질성 성장지연 소아에서 Bayley-Pinneau방법과 Tanner-Whitehouse 3방법에 의한 예측성인신장 비교)

  • Oh, Yeon Joung;Yu, Byung Keun;Shin, Jung Yeon;Lee, Kee-Hyoung;Park, Sang Hee;Lee, Kwang Chul;Son, Chang Sung
    • Clinical and Experimental Pediatrics
    • /
    • v.52 no.3
    • /
    • pp.351-355
    • /
    • 2009
  • Purpose : This study compared bone ages measured by the Greulich-Pyle (GP) and Tanner-Whitehouse 3 (TW3) methods and investigated the differences in predicted adult heights measured by Bayley-Pinneau (BP) and TW3 methods. Methods : Bone ages were assessed from left-wrist radiographs by two investigators, one for each GP and TW3 methods in 85 normal children, 30 precocious puberty girls, and 30 constitutional growth delay boys. The differences between the measured predicted adult heights using the BP and TW3 methods were compared in each group. Results : The bone age measured by the TW3 method was less than that by the GP method in normal children. The predicted adult heights measured by the two methods showed no significant difference in normal boys, while the predicted adult height measured by the TW3 method was higher than that by the BP method for normal girls ($156.4{\pm}4.7$ cm vs. $158.9{\pm}3.8$ cm, P<0.01) and for precocious puberty girls ($156.3{\pm}4.0$ cm vs. $159.3{\pm}4.2$ cm, P<0.01). In contrast, the predicted adult height was higher from the BP method than from the TW3 method in constitutional growth delay boys ($173.3{\pm}4.4$ cm vs. $169.7{\pm}3.2$ cm, P<0.01). Conclusion : There were significant differences in predicted adult heights between the BP and TW3 method in normal girls, precocious puberty girls, or constitutional growth delay boys. In precocious puberty and constitutional growth delay, the BP method might be preferred to predict adult height, but further studies on final adult height are needed.

Crack Growth Retardation Behavior in Aluminium 2024-T3 Alclad Alloy by Pre-Indentation (예비압입에 의한 알루미늄 2024-T3 알클래드 합금의 균열성장 지연거동)

  • 황정선;조환기
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.4 no.2
    • /
    • pp.42-51
    • /
    • 2001
  • The effects of pre-indentation technique are presented for A12024-T3 Alclad alloy using as skin material for aircraft fuselage and wing. Indentations were applied to specimens to be placed on the presumed path of fatigue crack growth before fatigue tests. Tension-tension fatigue tests were conducted on the edge cracked specimens in the L-T orientation. Test results were analyzed to investigate the effectiveness of pre-indentation with the variation of specimen's thickness, position of indentation and applied maximum stress. Fatigue crack retardation by pre-indentation is well recognized in the various conditions.

  • PDF

어린이 당뇨병

  • Yu, Hyeong-Jun
    • 건강소식
    • /
    • v.10 no.8 s.93
    • /
    • pp.12-15
    • /
    • 1986
  • 신체적 성장부진, 이차 성장 발현지연, 사회적 소외감, 자신감 부족, 지나친 소심 등의 심리적 합병증까지 유발하는 어린이 당뇨병

  • PDF

Fatigue Crack Growth Retardation Using Ring Indentation (링압인을 이용한 피로균열의 성장지연효과)

  • Im,Won-Gyun;Song,Jeong-Hun
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.31 no.10
    • /
    • pp.27-33
    • /
    • 2003
  • A method for the retardation of fatigue crack growth using ring indentation at the vicinity of a crack is examined. Residual stresses near crack tip are evaluated using fracture mechanics approach using the Bueckner weight function. The motivation is to develop a simple and effective method for obtaining an increase in fatigue lives to total failure of materials with crack. Fatigue testing of aluminum specimen showed that the retardation effects are observed after the application of the method.