• Annual Conference of KIPS
• /
• 2002.11b
• /
• pp.1241-1244
• /
• 2002

인터넷은 전세계를 연결하는 컴퓨터 망으로서 최근 기하급수적으로 그 수요가 증가하고 있다. 현재 전세계적으로 다양한 정보통신 서비스 창출과 향상된 성능을 가진 장치들의 개발 등으로 인해 과거 어느 때보다도 정보통신서비스 시장이 확대되고 있으며, 이에 따라 각 정보통신서비스 제공업자들도 기존의 가입자의 양적 확장에 치중하던 경향에서 탈피하여 보다 저렴한 고속/고품질 서비스 제공을 통하여 가입자들을 확보하기 위한 경쟁을 펼치고 있다. 정보통신서비스 제공업자들이 정보통신서비스 시장에서 다른 경쟁업체에 비하여 우위를 차지하고 보다 높은 수익창출을 위한 중요한 관건은 바로 정보통신서비스 이용자들에게 제공되는 통신 서비스의 품질 보장이다. 이를 위해서는 현재 사업자들이 사용자들에게 제공하는 통신서비스 품질 보장은 기존의 단순한 서비스 품질 보장 차원의 수준을 넘어 고객에게 서비스에 대한 신뢰성, 투명성 및 객관성을 입증할 수 있어야 한다. 이에 관한 입증 방법을 체계화한 것이 서비스 수준 규약(Service Level Agreement : SLA)이다 본 논문에서는 서비스 수준 규약의 개념과 SLA 표준화 동향을 소개하고, 현재 가장 보편적인 망인 IP 망에서의 표준화 동향 분석을 바탕으로 얻어진 SLA 표준 지표 모델에 대해서 제시한다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.1 no.2
• /
• pp.84-90
• /
• 1997

The turboshaft engine with the free power turbine has been used for various purposes, for instance electric power generator, emergency power source, helicopter powerplant and so on. Steady-state simulation program was developed and experimental tests was carried out for comparing with computer simulation results. The test unit was composed of 1-stage centrifugal compressor, the can type combustor chamber, 1-stage radial type compressor turbine, and radial type free power turbine, and its output power is obtained from 3-phase AC generator. Main component characteristics which was used for the steady state simulation program, were obtained from the manufacturer of the test unit, and modified from experimental results of test unit. In comparison between computer simulation and experimental test results even though the test unit has the operational limit, deviation of component performance characteristics in simulation were within 6％ range of experimental results.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.3
• /
• pp.273-277
• /
• 2016

In this paper, we deals with the digitization of high frequency sine wave power supply using power source of high frequency surgical equipment and RF device. High frequency surgical equipment has been using commonly on medical surgery because of its merits such as programmable depth of incision, availability of incision and coagulation in the same device, increasing the usability on surgical side. However, the core part of the device is consists of vacuum tubes which are expensive, not ease to use and must be imported, therefore it is inevitable of high prices, forces to develop the fully digitized alternative technology. The fully digitized high frequency sine wave power supply for surgical device is proposed and verified by experimental results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.4
• /
• pp.356-363
• /
• 2004

This paper presents a precision voltage control technique of a single phase PWM inverter for a constant voltage and constant frequency(CVCF) applications. The proposed control scheme employs an additional phase-locked loop(PLL) compensator which is constructed using the output capacitor voltage and current. The computer simulation and experiment are carried out for the actual single-phase PWM inverter and it is well demonstrated from these results that the steady-state performance and total harmonic distortion(THD) are remarkably improved by employing the proposed technique.

• Journal of the HCI Society of Korea
• /
• v.1 no.2
• /
• pp.19-26
• /
• 2006

This paper presents a novel pneumatic tactile display that can deliver some useful information. The air-jet display forms 5 by 5 arrays and features air nozzles with an external diameter of 2.4mm and internal diameter of 1.5 mm. In comparison with other tactile displays such as vibrotactile, there is little concrete psychophysical data relating to pneumatic displays, a fact which hinders their adoption. This paper addresses this challenge, and presents brief psychophysical studies examining localization rate, the two point threshold, stimulus intensity and the temporal threshold of cues produced by pneumatic air jets. Two groups of subjects were used in these studies, subsequently termed groups A and B. Both were comprised of eight participants. In the case of localization study we obtained 58.13% and 85.9% of localization rates each for dense display and sparse display. Two-points threshold test showed the length of gap between two air-jet stimuli which subjects can detect. However, it was formidable to find out precise temporal resolution of PTI owing to the limitation of capability of the pneumatic valves. Lastly, the results of stimulus intensity study suggest that by varying the size of a pneumatically created tactile stimulus, we can effectively vary its perceived magnitude.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.3
• /
• pp.70-77
• /
• 2014

In this paper, the development of unique model of the 2.75 inch rocket propulsion system is described. Recently developed korean 2.75 inch rocket propulsion system shows the improvement of a flame stability resulted from a change in the configuration of propellant grain, and of an incidental ignition protection function using the EMI(electromagnetic interference) filter on ignition system. Moreover it is shown that a directional flight stability is improved by increasing the number of fins and changing the nozzle configuration. Static firing test and thermal shock test were conducted for the validation before flight, and flight test of 210 rounds of rockets was conducted to verify the trajectory uniformity. In addition, intellectual property issues can be overcome with the unique korean 2.75 inch rocket motor as well as the performance improvement.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.6
• /
• pp.529-534
• /
• 2014

Pyrotechnic devices are widely used for space appendages. However, a cube satellite requirements do not permit the use of explosive pyrotechnic device. A nichrome burn wire release has typically been used for holding and release of deployable appendages of the cube satellite due to its simplicity and low cost. However, relatively low mechanical constraint force and system complexity for application of multi-deployable systems are disadvantages of the conventional mechanism. To overcome these drawbacks, we developed a hinge driving segmented nut type holding and release mechanism based on the nichrome burn wire release. The functional performance of the mechanism has been verified through release function test, static load test and shock level measurement test.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.10
• /
• pp.827-832
• /
• 2013

Heating wire cutting type separation mechanism has been widely used for cube satellite applications due to its design constraints such as small size of $10cm{\times}10cm{\times}10cm$ and light weight of less than 1kg. In addition, usage of pyro technic device is not allowed for cube satellite application. The conventional methods have some disadvantages of relatively small mechanical constraint force and the system complexity for the multi-deployable systems. In this paper, a separation nut type non-explosive separation mechanism has been proposed and investigated. The effectiveness of the design has been verified through the qualification tests of the mechanism.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1162-1169
• /
• 2012

One of the important operational requirements for mission critical Ethernet networked system is having the fault tolerant capability. Such capability can be obtained by equipping multiport Network Interface Card (NIC) in each node in the system. Conventional NIC uses two or more Media Access Controls (MACs) and a co-processor for the MAC switching whenever an active port fails. Since firmware is needed for the co-processor, longer fail-over switching and degraded throughput can be generally expected. Furthermore the system upgrading requiring the firmware revision in each tactical node demands high cost. In this paper we propose a novel single MAC based NIC that does not use a co-processor, but just use general discrete building blocks such as MAC chip and switching chip, which results in better performances than conventional method. Experimental results validate our scheme.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.415-420
• /
• 2010

This paper describes the design overview of shared file system $SANique^{TM}$ and analyzes the performance evaluation results of I/O intensive stress test based on various cluster file system architectures. Especially, we illustrate the performance analysis for the comparison results between the $SANique^{TM}$ and the Linux file system EXT3 system that is used to generally in Unix world. In order to perform our evaluation, Oracle 10g database system is operated on the top of cluster file system, and we developed the various kinds of testing tools which are compiled by ESQL/C from Oracle. Three types of architectures are used in this performance evaluation. Those are the cluster file system $SANique^{TM}$, EXT3 and the combined architecture of $SANique^{TM}$ and EXT3. In this paper, we present that the results of $SANique^{TM}$ outperforms other cluster file systems in the overhead for providing the true sharing over the connecting server nodes.