• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.2
• /
• pp.149-155
• /
• 2012

Purpose : Serum insulin levels are useful indicator which of reflecting the function of insulin secretion in pancreatic ${\beta}$ cell and diagnosis of diabetes, differentiating the cause of impaired glucose tolerance. Insulin measurement kits have shown some differences in many ways such as test methods as well as quality control. The purpose of this study was to evaluate the diagnostic performance of seven manufacturing companies commercial kits. Materials and Methods : The values of insulin measured by three manufacturing companies (Biosource, Siemens, TFB) with 59 samples in August 2009 were compared with those measured by four manufacturing companies (Immunotech, Izotope, BNIBT, Cisbio) with 68 samples in December 2011. We evaluated precision, recovery rate, dilution test and correlation of serum insulin measurement using seven manufacturing company kits. Statistical program SPSS 12.0 was used for the verification of results. Results : The coefficients variation of the precision on all seven different kits were showed within 5.0%. Recovery rate of Biosource, Siemens, TFB kits on three different levels showed 94.2~103.7%, 99.0~104.6%, 99.7~107.6% respectively. Immunotech, Izotope, BNIBT, Cisbio were 93.5~99.1%, 91.4~99.1%, 99.2~131.0%, 84.8~102.3% respectively. There was strong correlation between the measurement of insulin by Biosource kit and that by two commercial kits, Siemens (R2=0.96), TFB (R2=0.99). There was good correlation between the measurement of insulin by TFB kit and that by three commercial kits, Immunotech (R2=0.97), Izotope (R2=0.96), Cisbio (R2=0.97). In the dilution test performed with more than 200 ${\mu}IU/ml$ high concentration samples, samples with diabetes correctly was measured in all seven manufacturing kits. However, as measured with insulinoma samples TFB, Siemens, Izotope, Cisbio kits were correctly measured, but Biosource and Immunotech kits were measured 47.4 ${\mu}IU/ml$, 72.3 ${\mu}IU/ml$, respectively. Conclusion : Serum Insulin radioimmunoassay kits were showed excellent precision, correlation and good recovery rate. However, some kits were not measured correctly in the high concentration insulin values. when selecting a kit should be considered many factors that cost effectiveness, compatible for automation equipment, high performance kit, the environment for each laboratory such as reaction time and reporting time.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.5
• /
• pp.84-95
• /
• 2011

In this paper, we present a deblocking algorithm that removes grid and staircase noises, which are called "blocking artifacts", occurred in the compressed satellite images. Particularly, the given satellite images are compressed with equal quantization coefficients in row according to region complexity, and more complicated regions are compressed more. However, this approach has a problem that relatively less complicated regions within the same row of complicated regions have blocking artifacts. Removing these artifacts with a general deblocking algorithm can blur complex and undesired regions as well. Additionally, the general filter lacks in preserving the curved edges. Therefore, the proposed algorithm presents an adaptive filtering scheme for removing blocking artifacts while preserving the image details including curved edges using the given quantization step size and content analysis. Particularly, WLFPCA (weighted lowpass filter using principle component analysis) is employed to reduce the artifacts around edges. Experimental results showed that the proposed method outperforms SA-DCT in terms of subjective image quality.

• Science of Emotion and Sensibility
• /
• v.22 no.1
• /
• pp.89-100
• /
• 2019

Sleep apnea, a medical condition associated with a variety of complications, is generally monitored by standard sleep polysomnography, which is expensive and uncomfortable. To overcome these limitations, this study proposes an unconstrained wearable monitoring system with stretch-fiber sensors that integrate with the wearer's clothing. The system allows patients to undergo examinations in a familiar environment while minimizing the occurrence of skin allergies caused by adhesive tools. As smart clothing for adult males with sleep apnea, long-sleeved T-shirts embedding fibrous sensors were developed, enabling real-time monitoring of the patients' breathing rate, oxygen saturation, and airflow as sleep apnea diagnostic indicators. The gauge factor was measured as 20.3 in sample 4. The maximum breathing intake, measured during three large breaths, was 2048 ml. the oxygen saturation was measured before and during breath-holding. The oxygen saturation change was 69.45%, showing a minimum measurable oxygen saturation of 70%. After washing the garment, the gauge factor reduced only to 18.0, confirming the durability of the proposed system. The wearable sleep apnea monitoring smart clothes are readily available in the home and can measure three indicators of sleep apnea: respiration rate, breathing flow and oxygen saturation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.1
• /
• pp.23-28
• /
• 2013

The process of a feature matching for two different spatial data sets is similar to the process of classification as a binary class such as matching or non-matching. In this paper, we calculated a threshold by applying an equal error rate (EER) which is widely used in biometrics that classification is a main topic into spatial data sets. In a process of discriminating what's a matching or what's not, a precision and a recall is changed and a trade-off appears between these indexes because the number of matching pairs is changed when a threshold is changed progressively. This trade-off point is EER, that is, threshold. To the result of applying this method into training data, a threshold is estimated at 0.802 of a value of shape similarity. By applying the estimated threshold into test data, F-measure that is a evaluation index of matching method is highly value, 0.940. Therefore we confirmed that an accurate threshold is calculated by EER without person intervention and this is appropriate to matching different spatial data sets.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.1
• /
• pp.109-126
• /
• 2014

The level of service (LOS) of the Highway Capacity Manual (KHCM) has been used as a basic criterion at decision making processes for signalized intersections in Korea. The KHCM provides five steps for the signalized intersection analysis. Among them, lane grouping, which is the third step, significantly influence the final LOS. The current method presented in the KHCM, however, classifies a shared lane as a de facto turning lane group, even though the turning traffic of the shared lane is few. Thus, this research was initiated to provide an alternative. To this end, three alternatives were suggested, including the method based on the lane grouping presented in the U.S. Highway Capacity Manual, the method using turning ratio of shared turning lane, and the method using a threshold traffic volume in lane grouping. The feasibilities of the three methods were evaluated using a calibrated CORSIM model. Conclusively, the method using a threshold traffic volume in lane grouping outperformed.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.72-72
• /
• 2017

국내 농업에서 토양의 반전, 쇄토, 배토, 가능한 복합작업기인 무동력 디스크해로우 방식의 경운과 배토 고효율 복합작업기의 수요가 증가 하고 있다. 경운작업에서 일련의 과정은 작물의 생육과 관리차원에서 큰 의미를 지니며 작물재배의 첫 단계로 중요시 다루어져야할 과정이다. 이러한 작업기의 성능 시험에서 포장시험을 통해 복합기의 신뢰도와 실제 필드에서 발생하는 문제들을 포괄적으로 해결 할 수 있는 방안이 필요하다. 토양 경작을 위한 농업기기의 작업 저항은 식물 생산에서 유용성을 평가하는 가장 중요한 지표중 하나이다. 작업 저항(수평, 수직 방향의 힘)은 트랙터의 힘에 의해 생성된 동작을 방해하므로 토양 경운 시 에너지 소비를 결정하고 설계 매개 변수 측면에서 최적의 작업 조건을 결정하는 데 중요한 영향을 미친다. 따라서 본 연구에서는 경상대학교 내 위치한 실험동에서 Soil-bin에 이송장치를 설치한 후, 이송장치에 디스크 해로우 (Multidisc Vario, Tulip Agri., Netherlands)를 부착하여 실험을 진행하였다. 디스크 해로우의 원주 평면과 수직 평면 사이의 각 a(토양 표면에 수직)와 디스크의 해로우의 원주 평면과 작업 방향 사이의 각 b의 값을 독립 변수로 두고 a, b를 변화 시키면서 발생하는 이송장치의 견인력을 측정하여 농가 및 효율적인 경운작업 시 기초자료로 활용하고자 한다.

• Journal of Korean Library and Information Science Society
• /
• v.45 no.3
• /
• pp.5-36
• /
• 2014

The Web is rich with various sources of information that go beyond the contents of documents, such as hyperlinks and manually classified directories of Web documents such as Yahoo. This research extends past fusion IR studies, which have repeatedly shown that combining multiple sources of evidence (i.e. fusion) can improve retrieval performance, by investigating the effects of combining three distinct retrieval approaches for Web IR: the text-based approach that leverages document texts, the link-based approach that leverages hyperlinks, and the classification-based approach that leverages Yahoo categories. Retrieval results of text-, link-, and classification-based methods were combined using variations of the linear combination formula to produce fusion results, which were compared to individual retrieval results using traditional retrieval evaluation metrics. Fusion results were also examined to ascertain the significance of overlap (i.e. the number of systems that retrieve a document) in fusion. The analysis of results suggests that the solution spaces of text-, link-, and classification-based retrieval methods are diverse enough for fusion to be beneficial while revealing important characteristics of the fusion environment, such as effects of system parameters and relationship between overlap, document ranking and relevance.

• Journal of Korean Society of Rural Planning
• /
• v.20 no.1
• /
• pp.1-12
• /
• 2014

Living environments in rural area have become deteriorated rapidly. Increase of aging population, decline in agricultural income, polarization of wealth in rural community due to rural returners have caused severe decline and imbalance of living environments in rural area. Responding to this circumstances, governments currently develop projects for improving living environments focusing on individual housing which were excluded from governmental supports because those had been regarded as private property. Nevertheless, there are still some gaps and problems in evaluating the quality of living environment and suggesting effective solutions. It would be because standards and guidelines of the projects have been based on urban housing system. In order to support the implementation of the projects, this research has developed an index for evaluating and monitoring the quality of living environments in rural area. By applying Delphi method, the index has been created in four categories of 'security', 'convenience', 'comfortability', and 'durability' 'Security' consists of structural safety, crime, disaster, accident prevention. 'Convenience' includes three divisions of living, traffic, farm working. 'Comfortability' is divided into sanitation, indoor environments, and aesthetic appreciation. Lastly, 'durability' has four divisions of energy conservation, environmental friendliness, efficiency, and economics. Each sub-division also has different items from three to twelves. In the case of an index for performance evaluation, items have been derived from energy conservation(6-items), and environmental friendliness(7-items). Items developed as an index for evaluating rural living environments in this research might be good background information for remodeling project in rural housing development.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.437-443
• /
• 2018

This study investigates the effect of the mixing elements on the pressure loss and mixing performance in line mixer. The high density ozone water devices mixed with gas and liquid are used in various fields such as sterilizing of group feeding facilities and water quality management at a fish farm. Due to the decrease in rainfall due to climate change, pasteurization of drinking water from ground water and surface water is extremely important. Therefore, it is intended to develop a line-mixed gas liquid mixer with a small amount of space. In this study, the effects of the number of static mixers and the types and the number of the orifice used in line mixer on the volume fraction and the pressure loss were studied by CFD simulation. The pressure drops of line mixer with orifice which curved vanes were attached to were down to more than 50 percent of that of line mixer with static mixer whereas the mixing performance of the former was similar to that of the latter.

• Korean Journal of Remote Sensing
• /
• v.27 no.5
• /
• pp.587-599
• /
• 2011

As one measure of image interpretability, NIIRS(National Imagery Interpretability Rating Scale) has been used. Unlike MTF(Modulation Transfer Function), SNR(Signal to Noise Ratio), and GSD(Ground Sampling Distance), NIIRS can describe the quality of overall image at user's perspective. NIIRS is observed with human observation directly or estimated by edge analysis. For edge analysis specially manufactured artificial target is used commonly. This target, formed with a tarp of black and white patterns, is deployed on the ground and imaged by the satellite. Due to this, the artificial target-based method needs a big expense and can not be performed often. In this paper, we propose a new edge analysis method that enables to estimate NIIRS accurately. In this method, natural targets available in the image are used and characteristics of the target are considered. For assessment of the algorithm, various experiments were carried out. The results showed that our algorithm can be used as an alternative to the artificial target-based method.