• Journal of KIISE:Computer Systems and Theory
• /
• v.28 no.1_2
• /
• pp.33-44
• /
• 2001

최근 버퍼 캐쉬의 성능을 향상시키기 위한 많은 블록 교체 기법들이 제안되었으며 이 중에서 작업 집합 (working set) 변화에 잘 적응하고 구현이 용이한 Least Recently Used (LRU) 블록 교체 기법이 널리 사용되고 있다. 그러나 LRU 블록 교체 기법은 블록들이 규칙적인 참조 패턴을 보이면서 순차 참조되거나 순환 참조될 때 이 규칙성을 적절히 이용하지 못해 성능이 저하되는 문제점을 가진다. 본 논문에서는 다중 응용 트레이스를 이용하여 LRU 블록 교체 기법의 문제점을 관찰하고, 이 문제점을 해결하는 통합된 형태의 효율적인 버퍼 관리 (Unified Buffer Management, 이하 UBM) 기법을 제안한다. UBM 기법은 순차 참조 및 순환 참조를 자동 검출하여 분리된 공간에 저장하고 이들 참조에 적합한 블록 교체 기법으로 이 공간을 관리한다. 또한 순차 참조와 순환 참조를 위한 공간과 나머지 참조를 위한 공간의 비율을 최적으로 할당하기 위해 온라인에서 수집된 정보를 이용하여 계산된 단위 공간 증가당 예상 버퍼 적중 증가율을 이용한다. 다중 응용 트레이스 기반 시뮬레이션 실험에서 UBM 기법의 버퍼 적중률은 LRU 블록 교체 기법에 비해 평균 12%, 최대 28%까지 향상된 결과를 보였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11C
• /
• pp.1052-1057
• /
• 2006

The implement the adaptive partial response maximum likelihood (PRML) detector with tilt analyzer for asymmetric high-density optical storage system. For the estimation of disc tilt, we exploit spc patterns in each data frame. Because of using the ROM table to renew the coefficients of equalizer and reference values of branches, the complexity of the hardware is reduced. The proposed PRML has been designed and verified by VerilogHDL and synthesized by the Synopsys Design Compiler with Hynix $0.35{\mu}m$ STD cell library. In the result, the total gate count is 35K, and the maximum operating frequency is 140MHz.

• Journal of KIISE
• /
• v.42 no.12
• /
• pp.1544-1550
• /
• 2015

Recently, the development of practical wearable robot interfaces has resulted in the emergence of wearable robots such as arm prosthetics or lower-limb exoskeletons. In this paper, we propose a novel method of wrist movement intention estimation based on a regression technique using electromyography of human bio-signals. In daily life, changes in user arm position changes cause decreases in performance by modulating EMG signals. Therefore, we propose an estimation method for robust wrist movement intention for arm position changes, combining several movement intention models based on the regression technique trained by different arm positions. In our experimental results, our method estimates wrist movement intention more accurately than previous methods.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.11
• /
• pp.1198-1206
• /
• 2003

In this paper, a MMIC waveguide mixer module based upon the novel suggested mode converter for wave-guide-to-microstrip transition was fabricated and measured. The insertion and return losses of the mode converter was optimized by compensating the discontinuity effect between ridge and microstrip with the modification of 50 $\Omega$ microstrip line pattern. Due to the low loss nature of the mode converter, a millimeter wave MMIC mixer chip can be successfully applied as a waveguide module for mmW waveguide communication system. The measured results of the module showed the successful MMIC chip application in waveguide and the negligible degradation of the supplied chip specification.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.6
• /
• pp.11-16
• /
• 2017

Multi-level holographic data storage requires modulation codes for avoiding two dimensional inter-symbol interference (2D-ISI). Modulation codes can remove the fatal ISI pattern of neighboring the largest and the smallest symbols. In this paper, we propose a 4-level 4/6 modulation code and its trellis encoding for error correction. The proposed 4/6 modulation code prevents that the symbol 0 and 3 are not adjacent in any direction. Also, we compare the proposed modulation code with the same code rate modulation codes for four-level holographic data storage.

• The KIPS Transactions:PartB
• /
• v.10B no.3
• /
• pp.273-280
• /
• 2003

Recommender System can help users to find products to Purchase. A representative method for recommender systems is collaborative filtering (CF). It predict products that user may like based on a group of similar users. User information is based on user's ratings for products and similarities of users are measured by ratings. As user is increasing tremendously, the performance of the pure collaborative filtering is lowed because of high dimensionality and scarcity of data. We consider the effect of dimension deduction in collaborative filtering to cope with scarcity of data experimentally. We suggest that SVD improves the performance of collaborative filtering in comparison with pure collaborative filtering.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.5
• /
• pp.90-98
• /
• 2007

The objective of this investigation was to reveal the cause of the faulted cable(LV URD(low voltage underground) cable). For the analysis, various types or equipments such as external pattern, thermal pattern, surface structure, thermal analysis, and property distribution were deployed. The international standards and the specification provided by the manufacturer of faulted cable were examined whether it fit the standards. The summary is as follows. (1) Discovered as a factor lowering insulation performance of the faulted cable: minimum thickness of the insulation layer specified by IEC 60502-1 and IEC 60811-1-1 was not fit. (2) Infrared absorption peaks measured by FT-IR spectrometer revealed that the measurements made for the same material did not conform and it is an important basis for proving heterogeneous composition of the insulation material. (3) It was found that PVC bedding was thermally fragile and therefore long term exposure at the site could cause similar fault pattern.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.786-791
• /
• 2007

Korean high speed train(HSR-350x) has adopted a combined electrical and mechanical(friction) braking system. Brake blending control unit(BBCU) controls each brake system to fulfill the required brake performances such as braking distance, deceleration and jerk. Also the braking system should be designed considering the economical management, such as effective use of generated braking energy and the minimum wear of friction materials(a pad and a brake shoe). In this paper, we establish the disc braking force pattern that reduces the wear of pad in the disc braking system by minimizing the variance of the instantaneous disk baking energy during braking time, and compare the wear mass of pad between the conventional disc braking force pattern and the established results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.2
• /
• pp.358-365
• /
• 2007

In this paper, the effects of transmit beamforming on downlink performance in DS-CDMA communication systems are investigated. The uplink and downlink in FDD systems use different carrier frequencies. If the downlink uses the same weighting vectors as the uplink, the antenna beam for downlink is formed with certain DOA shift and it thus affects the beamforming gain. So, the impacts of different frequencies on the downlink beam patterns are studied. One possible algorithm to convert uplink beamforming weights to downlink, which is called frequency-calibrated processing, is also evaluated to reduce the degradation of downlink performance due to different frequencies. Under frequency selective channels, the downlink chooses a PUPW beamforming scheme when the uplink employs a PPPW vectors. To form a beam pattern for a PUPW after combining the downlink PPPWs converted from the uplink PPPWs, three approaches are studied. One method is to consider only one dominant path and thus obtain a single main-beam. In the others, multiple-beams weighted with the magnitudes of all paths and equally weighted with all paths are constructed.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.9
• /
• pp.11-19
• /
• 2009

A RAM-based Neural Net(RBNN) which has multi-discriminators is more effective than RBNN with a discriminator. Experience Sensitive Cumulative Neural Network and 3-D Neuro System(3DNS) that accumulate the features point improved the performance of BNN, which were enabled to train additional and repeated patterns and extract a generalized pattern. In recognition process of Neural Net with multi-discriminator, the selection of class was decided by the value of MRD which calculates the accumulated sum of each class. But they had a saturation problem of its memory cells caused by learning volume increment. Therefore, the decision of MRD has a low performance because recognition rate is decreased by saturation. In this paper, we propose the method which improve the MRD ability. The method consists of the optimum MRD and the matching ratio prototype to generalized image, the cumulative filter ratio, the gap of prototype response MRD. We experimented the performance using NIST database of NIST without preprocessor, and compared this model with 3DNS. The proposed MRD method has more performance of recognition rate and more stable system for distortion of input pattern than 3DNS.