• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1814-1821
• /
• 2012

As a new Korean grid code which includes LVRT requirement to wind farm of which capacity is greater than 20MW is activated in 2012, this paper developed the analytical model of the Korean LVRT for the simulation based feasibility study of the wind farm interconnection into power systems. The developed model of the LVRT is verified by applying it into the performance evaluation of the wind farm interconnected power systems and the effect of Korean LVRT is analyzed through case studies considering typical disturbances of power systems.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.823-826
• /
• 2013

Subscriber Protector is installed in a point of connection between main wire and in-plant cable to protect telecommunication facilities and service users from overvoltage or overcurrent due to the lightning or induction. In Korea, there are regulations for obligation of installation and performance criteria of protectors, but these regulations in force can not cope with diversification of services because it stands on the basis of PSTN service only. In earlier paper, we suggested the improvement way of technical regulation for subscriber protector in customer premises. and in this paper, we propose revised criteria for overvoltage performance of protector in customer premises, and make feasibility of revised criteria through inspection tests.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.3
• /
• pp.339-346
• /
• 2012

The pre-evaluation of the current-collection performance is an important issue for high-speed railway vehicles. In this paper, using flexible multibody dynamic analysis techniques, a simulation model of the dynamic interaction between the catenary and pantograph is developed. In the analysis model, the pantograph is modeled as a rigid body, and the catenary wire is developed using the absolute nodal coordinate formulation, which can analyze large deformable parts effectively. Moreover, for the representation of the dynamic interaction between these parts, their relative motions are constrained by a sliding joint. Using this analysis model, the contact force and loss of contact can be calculated for a given vehicle speed. The results are evaluated by EN 50318, which is the international standard with regard to analysis model validation. This analysis model may contribute to the evaluation of high-speed railway vehicles that are under development.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.4
• /
• pp.309-318
• /
• 2013

Abutment-to-pile connection in an integral abutment bridge is vulnerable to lateral displacement induced by thermal movement of the superstructure. However, previous researches have merely focused on the connection. In order to improve the performance of the connection, new abutment-to-pile connection designs were proposed based on quasi-static nonlinear finite element model. The reinforcement detail specified in PennDOT DM4 and HSS tube were barely effective in controlling crack growing but spiral rebar effectively performed to delay crack growth as well as absorbing energy capacity. However, it was found that delaying cracking and strengthening the connection also caused the high lateral load in superstructures. Consequently, shape of HP pile were modified to introduce plastic hinge of the HP pile for reducing the lateral load in superstructures. Connections with modified HP pile significantly prevented crack propagations under the lateral displacement.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.6
• /
• pp.545-551
• /
• 2016

Membrane structures which can be used large spatial structure are being expanded because of various advantages. However, despite the diverse membrane structure buildings and materials, the standard for membrane material performance that considering fire safety is still inadequate. Therefore, this study applied basalt or glass woven fabric with flame resistance on architectural membrane, and report the fire safety for architectural membrane using the strength properties, flammability and incombustibility. From the test result, the architectural membrane using basalt or glass woven fabric showed a low heat release rate and total heat release. Therefore, it was confirmed that the fire safety is relatively high.

• Journal of IKEEE
• /
• v.17 no.2
• /
• pp.96-103
• /
• 2013

Since multimedia data takes large part of realtime transmission in wireless communication environments such as IEEE 802.11, QoS issues became one of the important problems with network performance. 802.11e MAC provides differentiated services based on priority schemes to solve existing 802.11 MAC problems. The TXOP is an important factor with the priority to improve network performance and QoS because it defines the time duration in which multiple frames can be transferred at one time for each station. In this paper, therefore frame sizes, TXOP Limit, and Priority values in accordance with the number of stations are experimented and derived for best network performance and QoS. Using 802.11e standard parameters, simulation results show the best throughput when the number of stations is 5 and TXOP Limit value is 6.016ms. For fairness, the best result is achieved at 3.008ms of TXOP Limit value and 15-31 of CW(Contention Window) that is lower priority than CW 7-15.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.2
• /
• pp.179-185
• /
• 2020

Recently, in order to improve the performance of the Earthquake Early Warning System (EEWS) and to supplement the effects of earthquake disaster prevention in epicenters or near epicenters, development of on-site EEWS has been attempted. Unlike the national EEWS, which is used for earthquake disaster prevention by using seismic observation networks for earthquake research and observation, on-site EEWS aims at earthquake disaster prevention and therefore requires efficient design and evaluation in terms of performance and cost. At present, Korea lacks the necessary core technologies and operational know-how, including the use of existing EEWS design criteria and evaluation methods for the development of On-Site EEWS as well as EEWS. This study proposes hardware and software design directions and performance evaluation items and methods for seismic data collection, data processing, and analysis for localization of On-Site EEWS based on the seismic accelerometer requirements of the Seismic and Volcanic Disaster Response Act.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.2
• /
• pp.293-300
• /
• 2007

As the development of the various IP-based services, it is expected that Internet telephony service will gradually replace the traditional PSTN-based telephony service. But there are many issues resolved to spread the Internet telephony service. One of them is to support the emergency services in the Internet telephony. In the case of USA, it has been regulated that 911 services should be supported in the Internet telephony services using VoIP on the similar performance level to PSTN 911 service. According to the regulation, basic VoIP 911 calls should be routed to the general access line of LEA without the location information or the callback number, but the enhanced VoIP 911 calls with the location information and callback number should be routed on the dedicated 911 network and destined to the local 911 distribution center such as PSAP. But, in the current VoIP-based Internet telephony network, the emergency call service has not been handled as one of the special services as well at has a worse performance in comparison to it on PSTN. Moreover, the service has a critical problem that it can not be destined to the nearest PSAP because of the insufficient information about the location information and the call back number. In this paper, we suggest the SIP-based emergency call service mechanism in order to resolve the problems above mentioned. This suggested mechanism is implemented to show its effectiveness and efficiency.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2006.06a
• /
• pp.57-62
• /
• 2006

휴대용 단말기의 소형화 및 지능화와 더불어 차세대 PC 기반의 유비쿼터스 컴퓨팅에 대한 관심이 높아짐에 따라 최근에는 펜이나 음성 입력 멀티미디어 등 여러 가지 대화 모드를 구비한 멀티 모달 상호작용 (Multi-Modal Interaction MMI)에 대한 연구가 활발히 진행되고 있다. 따라서, 본 논문에서는 잡음 환경에서의 명확한 의사 전달 및 휴대용 단말기에서의 음성-제스처 통합 인식을 위한 인터페이스의 연구를 목적으로 Voice-XML과 Wearable Personal Station(WPS) 기반의 음성 및 내장형 수화 인식기를 통합한 멀티 모달 명령어 인식 시스템 (Multi-Modal Instruction Recognition System : MMIRS)을 제안하고 구현한다. 제안되어진 MMIRS는 한국 표준 수화 (The Korean Standard Sign Language : KSSL)에 상응하는 문장 및 단어 단위의 명령어 인식 모델에 대하여 음성뿐만 아니라 화자의 수화제스처 명령어를 함께 인식하고 사용함에 따라 잡음 환경에서도 규정된 명령어 모델에 대한 인식 성능의 향상을 기대할 수 있다. MMIRS의 인식 성능을 평가하기 위하여, 15인의 피험자가 62개의 문장형 인식 모델과 104개의 단어인식 모델에 대하여 음성과 수화 제스처를 연속적으로 표현하고, 이를 인식함에 있어 개별 명령어 인식기 및 MMIRS의 평균 인식율을 비교하고 분석하였으며 MMIRS는 문장형 명령어 인식모델에 대하여 잡음환경에서는 93.45%, 비잡음환경에서는 95.26%의 평균 인식율을 나타내었다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.7
• /
• pp.22-30
• /
• 2015

For long-term evolution (LTE) MIMO transmission, codebooks are used to utilize the estimated channel information under the limited feedeback environment, and related study has been actively performed. Existing codebooks include codevectos constructed based on vector quantization (VQ) and discrete Fourier transform (DFT), and the LTE standard specifies codebooks modified from these examples to support up to 8 transmit antennas. As the number of antennas increases and as the spatial channel model is used as a standard environment to evaluate the LTE transmission performance, new beamforming methods as well as codebook designs are needed. In this paper, we implement the 3-dimensional spatial channel model (3D-SCM) to analyze the key statistical characteristics of the generated channel, and present efficient ways of determining corresponding codebooks. In particular, we propose a nonuniform-phase DFT-based codebook to improve the existing uniform-phase DFT-based codebook, and evaluate its performance under the given SCM transmission environment. There exists a strong tendancy in statistical distributions of the phase difference between adjacent antenna elements for the SCM, which can be appropriately exploited in codebook design to produce a performance gain over the existing design.