• Fiber Technology and Industry
• /
• v.8 no.1
• /
• pp.19-23
• /
• 2004

Wearable computer는 1980년대 중반부터 개발되기 시작하면서 1990년대에 들어서 본격적으로 개발이 진행되었다. 초기에는 컴퓨터의 각 부품을 분해하여 편리하게 배치하거나 신체의 됫부분으로 옮겨 조립함으로써 앞에서 보기에 보이지 않게 하는 정도의 매우 투박한 수준이었지만, 전자제품 생산기술의 발전이 가속화되면서 부품이 소형화되고 성능이 향상되면서 wearable computer의 기능이 크게 업그레이드되었다. 이러한 노력 덕분에 2001년도부터는 일상생활에서 착용이 가능한 수준의 디지털 의류의 형태로까지 개발되면서 언제 어디서나 네트워크에 접속하여 정보를 공유할 수 있는 유비쿼터스 시대를 향하여 나아가고 있다.(중략)

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.887-892
• /
• 2003

A modeling method for the modal analysis of a rotating composite beam is presented in this paper. Linear differential equations of motion are derived by using the assumed mode method. For the modeling, hybrid deformation variables are employed and approximated to derive the equations of motion Symmetrical laminated layers are considered for the composite beam. The effects of the dimensionless angular velocity, the hub radius and the fiber orientation angle parameter on the variations of modal characteristics are investigated.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.9
• /
• pp.149-156
• /
• 2012

The Fabric Electrode was proposed for the effective production of the display based on electrowetting in this paper and designed the source driver of flexible display which could be driven by the electrowetting cell. The electrowetting cell matrix was implemented on the substrate(PET) by imprinting. The driver fabric, wetting electrode fabric and conductive fabric was placed horizontally and vertically in the groove between cell matrix and the electrowetting cell matrix can be driven by the cross-point as electric connection. The integration density of driver module is decreased because using the R/2R DAC module per channel in the conventional method. The proposed method could utilize the effective production process and reduce the production price of a display panel. The source driver which consume lower power and can increase the integration density because of reducing the number of driver device per channel was designed and evaluate the driver operation by the simulation using the VHDL programming in this paper.

• Archives of design research
• /
• v.17 no.3
• /
• pp.27-38
• /
• 2004

It is important for designers to be supported with their decision-making on colours which is often based on personal distinction rather than logical dialogue that may lead to confusion within communicating with others. To help these problems and to gain productivity, we would like to propose a way to define colour grouping method. In other words, the purpose of this study is to help to improve the communication and productivity within the design and designers. The grouping was based and inspired by from the studies of Kobayashi, Hideaki Chijiawa, Allis Westgate and Martha Gill. The study of grouping is based on the "tones" of each group, as they seem to reflect a designer s sentimentalism of chosen colours the best. Each of these groups will be named Bright , Pastel ,Deep and Neutral The general concept of each groups are: - Bright: high quality of pixels of primary colour - Pastel: primary colour with white - - Deep: Primary colour with gray or black - Neutral: colours that does not include any of above Each of the colour group has been allocated into Si-Hwa Jung's colour charts and colour prism to visualize the relationships between the colour groups. These four groups and the colours included in them will be broken down to smaller groups in order to make colour palette. This would break the barrier and result in using colours in groups as well as crossover coordination. This study would result in new ways of using colurs for designers designers

• The Journal of the Korea Contents Association
• /
• v.20 no.12
• /
• pp.529-536
• /
• 2020

This paper presents experimental investigations about compressive strength and durability of reinforced concrete compressive members repaired using ductile fiber reinforced cementitious composite (DFRCC) and carbon fiber sheet through freezing and thawing test. Total 24 RC specimens of 100x100x400mm size were tested by compressive strength test and freezing and thawing test by KS F 2456. The specimens were reinforced using 4D10 steels and repaired on 4 sides expect on top cycle. Test results showed that the specimens repaired using fiber carbon sheet revealed about 5% higher values of the compressive strength compared than the cases of DFRCC motar. On the other hand, the resurts did not showed meaningful differences in the aspect of durability. For further research, considerations of the steel interference effect and real old specimens such as taken from real deteriorated structures are needed to be tested after repairing with DFRCC and carbon fiber sheet.

• Journal of Animal Science and Technology
• /
• v.51 no.3
• /
• pp.225-230
• /
• 2009

This experiment was carried out to investigate the effects of ruminally inserted artificial fiber (RIAF; polymerized fibrous implements) on growth performance, feed intake and carcass characteristics of Hanwoo steers. Thirty six steers averaging $368.3\pm20.3kg$ were randomly assigned into three groups: control group, the ruminal insertion of three pieces (T1), and five pieces (T2) of RIAF. Average daily gain, feed intakes and conversions among treatments were similar. Numbers of rumen villi were higher in RIAF treatment (T1 and T2) groups than control group, but they were not significant (p>0.05). The length of villi were significantly longer in T2 than control group (p<0.05). Fecal weight tended to decrease in T1 compared with the control group (p>0.05). There was no differences on carcass traits inc1uding longissmus muscle area, back fat thickness, marbling score, meat color, and fat color among treatments.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.4
• /
• pp.279-284
• /
• 2012

Purpose: This study evaluated the effect of glass fiber pre-impregnated with light-curing resin on the fracture strength and fracture modes of a maxillary complete denture. Materials and methods: Maxillary acrylic resin complete dentures reinforced with glass fiber pre-impregnated with light-curing resin (SES MESH, INNO Dental Co., Yeoncheongun, Korea) and without reinforcement were tested. The reinforcing material was embedded in the denture base resin and placed different regions (Control, without reinforcement; Group A, center of anterior ridge; Group B, rugae area; Group C, center of palate; Group D, full coverage of denture base). The fracture strength and fracture modes of a maxillary complete denture were tested using Instron test machine (Instron Co., Canton, MA, USA) at a 5.0 mm/min crosshead speed. The flexure load was applied to center of denture with a 20 mm diameter ball attachment. When fracture occurred, the fracture mode was classified based on fracture lines. The data were analyzed with one-way ANOVA at the significance level of 0.05. Results: There were non-significant differences (P>.05) in the fracture strength among test groups. Group A showed anteroposterior fracture and posterior fracture mainly, group B, C and control group showed partial fracture on center area mostly. Most specimen of group D showed posterior fracture. Conclusion: The location and presence of the fiber reinforcement did not affect the fracture strength of maxillary complete denture. However, reinforcing acrylic resin denture with glass fiber has a tendency to suppress the crack.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.1
• /
• pp.90-90
• /
• 2003

본 시험에서는 무첨가구인 대조구와 대조구에 남은 음식물을 수준별로 첨가하고 단백질의 수준을 높여준 leftover food 10%와 leftover food 20% 및 leftover food 30%의 4처리구와 각 처리구에 녹차 부산물을 1%씩 첨가한 4처리로 총 8처리 5반복으로 반복 당 6수씩 총 240수를 임의 배치하여 사양 시험을 실시하고, 증체량 과 사료섭취량 및 사료효율, 폐사율과 체조성 및 혈중 콜레스테롤 및 도체 콜레스테등을 측정한 결과는 다음과 같다. 1. 사육후기의 증체량은 대조구가 1,364g으로 가장 높은 증체를 보였으며 (P<0.05), 남은 음식물 10%, 20% 및 30% 그리고 이 4처리구에 녹차 부산물을 첨가한 처리구에서는 모두 대조구 보다 낮은 증체를 보였다. 개시체중과 사료 섭취량에서는 통계적 유의차를 보이지 않았다 (P>0.05). 2. 폐사는 남은 음식물 10% + GTB 1%첨가구 에서만 나타났다. 남은 음식물 첨가가 육계의 폐사에는 영향을 미치지 않는 것으로 사료된다. 3. 조섬유 (16.70)와 조단백질 (20.09)의 함량은 유사한 결과를 보였으나 조지방 (10.55)함량은 다소 낮게 나타났다. 4. 혈중 cholesterol 함량은 남은 음식물 20% + GTB 1%와 남은 음식물 30% + GTB 1%에서 각각 146.96mg/100ml와 172.03mg/100ml로 높은 수치를 보였으며 통계적 유의차를 보였다 (P<0.05). 5. 도체 cholesterol은 대조구에서 98.57mg/100g으로 가장 높은 수치를 보였으며 남은 음식물 30% + GTB 1%가 72.10mg/100g으로 낮게 나타났으며 통계적 유의차를 보였다 (P<0.05).

• Journal of Veterinary Clinics
• /
• v.26 no.4
• /
• pp.324-330
• /
• 2009

This study was performed to determine the effectiveness of poloxamer/sodium alginate mixture(PX/SA) barriers on prevention of post-operative peritoneal adhesion in dogs. Fifteen mongrel dogs were divided into three experimental groups: non-treated group, 2% Sodium Carboxymethylcellulose (SCMC) treated group and PX/SA treated group. In order to induce adhesions, the anti-mesenteric serosa of the ileum was exteriorized and then abraded in a standard manner by scraping with a scalpel blade to create homogeneous petechial hemorrhagic surface over a 1 ${\times}$ 1 cm area. Solution of SCMC was allowed to spread across the intraperitoneal organs through a catheter using a syringe. PX/SA was simply coated over the abraded tissues. On day before and day 1, 4, 7, and 14 after operation, venous blood specimens were collected for measurement of RBC, total WBC and fibrinogen. The adhesions were blindly assessed 3 weeks later by using a computerized tensiometer. The RBC, total WBC and fibrinogen values of three groups showed no statistical significances. The mean tensile strength(gram force, gf) of formed adhesions on day 21 after surgery was 173.05${\pm}$113.48 in the non-treated group, 111.42 ${\pm}$ 38.25 in the SCMC group, and 69.00 ${\pm}$ 45.07 in the PX/SA group. The tensile strength values for adhesion seperation in PX/SA group was lower than those in SCMC group(p < 0.05) and significantly lower than those in the non-treated group(p < 0.05). Our data suggested that PX/SA should be effective on reducing peritoneal adhesion formation in dogs compared with SCMC. PX/SA may be applicable to preventing post-operative intraperitoneal adhesion in dogs.

• Journal of Animal Science and Technology
• /
• v.47 no.4
• /
• pp.565-572
• /
• 2005

An experiment was conducted to determine the effect of supplementation of insoluble dietary fiber (Vitacel®) on growth performance and nutrient digestibility in weanling pigs. A total of 96 pigs that averaged 6.49$\pm$0.52kg BW and 23$\pm$2.1d age were allocated in a randomized block design with two pigs per pen and 12 pens per treatment. Pigs and feeders were weighed 10-days interval for the 40-d trials to determine ADG, ADFI and feed:gain ratio(F:G). Pigs were fed one of four diets:1) Control diet (C) 2) C+0.3% insoluble dietary fiber(IDF) 3) C+0.6% IDF and 4) c+0.9% IDF. For the determination of fecal nutrients digestibility, pigs were fed diets(diet 2) with 1% Celite-545(Fluka) as a marker and feces were collected on $9^{th}$ day and $18^{th}$ day after feeding diet 2. During the whole experimental period, pigs fed diet with 0.3% IDF have significantly higher ADG than other dietary treatment groups(P<0.05). ADG of pigs fed diet with 0.6% IDF was higher than that of pigs fed control diet(P<0.05). However, there was no significant difference in ADG between control group and 0.9% IDF group(P>0.05). ADFI of pigs fed diet with 0.3% IDF was significantly higher than any other dietary treatment groups(P<0.05). There was no significant difference in ADFI among control group, 0.6% and 0.9% IDF supplementation groups (P>0.05). Digestibilities of organic matter, crude protein, crude fiber and energy were significantly higher in 0.3% IDF supplementation group than any other dietary groups. However, there was no difference in over all nutrient digestibilities between 0.6% and 0.9% IDF group. Feeding diets more than 0.6% IDF did not affect the rest of the nutrients digestibilities except for ADF digestibility compared to control diet. Dietary supplementation level of IDF showed a significant quadratic effect on performance improvement of piglets. This response of growth performance to IDF supplementation is, as expected, in agreement with that of nutrient digestibility. Our results showed that IDF supplementation to diet for weaned piglets might be beneficial in terms of growth and nutrient digestibility. However, there should be more study on the relationship between level of IDF supplementation and piglet response as well as the exact mode of action of IDF in weaned piglets.