• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.17 no.30
• /
• pp.73-79
• /
• 1994

This paper propose Adaptive Maintenance as a new type of maintenance for machine failures which are unpredictable. A purpose of adpative maintenance is to decrease inconsistency. In order to pick up some of problems the traditional maintenance policy, We discussed Time Based Maintenance(TBM) and Condition Based Maintenance(CBM) with Bath-Tub Curve. By using Machine Condition Diagnosis Technique (CDT), Monitored condition maintenance deals with the dynamic decision making for diagnosis procedures at maintenance and caution level. Adaptive Maintenance is a powerful tool for Total Production Maintenance(TPM).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1723-1728
• /
• 2009

수자원시설물의 유지관리와 조사, 계획, 설계, 제작, 설치, 운전, 보전을 거쳐 폐기에 이르는 시설물의 Life Cycle을 관리하기 위해 IT 기술을 이용하여 설비를 체계적으로 운영 관리하고 있다. 수자원시설의 점검관리에 있어 기존의 관리방법은 점검자가 관리항목을 대장에 기입하고 기입한 자료를 PC에 저장하여 관리함으로써, 업무의 복잡성 및 중복성이 발생됨으로써 업무효율이 저하되고 있는 실정이다. 이에 따라, 본 연구에서는 이러한 문제점을 효율적으로 해결하기 위하여 유비쿼터스 기술인 RFID를 현장에 적용하기 위하여 수자원시설에 대하여 표준코드를 정립하였으며, 수자원시설 이력관리 구축을 위하여 RFID 현장에 적용하고, RFID 리더기를 이용하여 시설물의 이력 관리 시스템과 연동하여 체계적인 시설관리 기반을 구축하였다. 이로써, 시스템을 통해 관리되는 시설물의 이력정보를 활용하여 설비 교체주기, 통계자료 조회, 예산 반영 계획수립 등의 업무에 즉시 적용이 가능하며 체계적이고 효율적인 업무수행이 가능할 것으로 판단된다.

• Proceedings of the Safety Management and Science Conference
• /
• 2007.04a
• /
• pp.51-59
• /
• 2007

오수처리시설물 제어하는 기존 제어장치는 PLC에 의한 것으로 조건제어, 유지관리, 기능확장에 따른 운영에 많은 어려움을 가지고 있다. 본 연구에서는 임베디드 시스템에 의한 제어장치를 개발하여 다양한 환경에 대한 유입수량, 농도상태에 따른 반응시간 및 전체 진행시간을 프로그램 하기 쉬운 구조로 하였다. 또한 효율적인 장비가동으로 설비보전을 할 수 있어 유지비용을 줄일 수 있다. 가장 큰 목적은 사용자와 관리자가 쉬운 유지관리를 위해 보다 더 신뢰할 수 있는 배출수 운영으로 하천 수질개선을 위함이다.

• The Safety technology
• /
• no.178
• /
• pp.24-25
• /
• 2012

한국중부발전(주) 서울화력발전소는 당인리발전소로 잘 알려진 우리나라 최초의 화력발전소다. 제4호기(137,500kW)가 준공된 1971년 당시에는 서울시 전력수요의 75%를 담당하는 등 우리나라 산업발전의 견인차 역할을 해왔다. 현재는 제4, 5호기 총 설비용량 387,500kW로 수도권 전력 공급의 중추적인 역할을 해오고 있는 것은 물론, 국내 최초 열병합발전소로서 여의도, 동부이촌동, 반포, 마포 지역의 5만 여 세대에 난방열과 온수를 공급하고 있다. 이외에도 1993년부터는 발전연료로 사용해온 유류를 천연가스로 전환하고, 2002년에는 질소산화물 저감설비를 설치해 대기환경오염 수치를 10분의 1로 낮추는 등 에너지 절약 및 환경보전에 대한 노력도 꾸준히 펼치고 있다. 이와 같이 우리나라 최고의 화력발전소로서 명성을 이어온 이곳은 지난 1980년 11월 7일부터 무재해를 이어오면서 무재해 23배수와 무재해일수 11,591일이라는 대기록을 달성했다. 이는 무재해 운동을 벌이고 있는 기업들 중 최장의 무재해기록이기도 하다. 그렇다면 이곳은 어떤 활동을 통해 무재해 사업장의 명맥을 이어나갈 수 있었을까. 한국중부발전(주) 서울화력 발전소의 박형구 소장을 만나 이야기를 나눠봤다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.81-86
• /
• 2003

Recently the introduction of VE & LCC techniques for large size electric power facilities be achieved in various kinds form, of and tends to evaluate to the beginning investment cost when think about cost of electric power facilities usually, but must consider all life cycle cost (maintenance cost, repair cost, improvement cost, operation cost, electric power cost etc.). This treatise applies design techniques that consider copper loss related by voltage drop at power supply of long distance in trunk design and all life cycle cost techniques

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.5 s.27
• /
• pp.186-192
• /
• 2005

The purpose of this study is to find the reality of environmental management cost in construction projects and to suggest some policies in order that owners appropriate the environmental management cost reasonably in the construction budget for reducing the environmental pollution at job sites. We surveyed the actual state of appropriating and expending the environmental management cost over 122 construction sites. According to the results of the survey, while the appropriated rate of the environmental management cost was 0.59% of the total construction cost. the expended rate reached at 0.94%. When examining the antipollution facilities which were operated in job sites, the investment for equipment against air-pollution such as tire washer, dust-proof device was relatively higher than other antipollution equipment. As the method appropriating the environmental management cost, we concluded that a quantity-per-unit costing method is more reasonable than appropriating at a fixed rate of total construction cost considering that there is little correlation between total construction cost and the environmental management cost. To do so, antipollution facilities that must be examined at a design or estimation stage of a construction project should be prescribed by the law. Moreover, referenced cost data for the quantity-per-unit costing should be prepared and officially published.

• Journal of the Korean Institute of Gas
• /
• v.21 no.4
• /
• pp.16-20
• /
• 2017

Current maintenance system are unable to suggest solid basis of maintenance for roating and static equipment. When a filure occurs, replacement or repair without proper process of failure cause analysis would often result in even greater risk. Therefore in this study, a procedure of Reliability Centred Maintenance is develped in order to perform maintenance in preventive mainer (PM), and to effectively manage risk of any equipment based on failure types and respective rates of failure. Ultimately an equipment with higher risk will be monitored which will lead to effectively prevent and manage any major accident.

• Journal of Internet Computing and Services
• /
• v.24 no.2
• /
• pp.37-45
• /
• 2023

In line with the 4th Industrial Revolution, facility maintenance technologies for building smart factories are receiving attention and are being advanced. In addition, technology is being applied to smart farms and smart fisheries following smart factories. Among them, in the case of a recirculating aquaculture system, there is a motor pump that circulates water for a stable quality environment in the tank. Motor pump maintenance activities for recirculating aquaculture system are carried out based on preventive maintenance and data obtained from vibration sensor. Preventive maintenance cannot cope with abnormalities that occur before prior planning, and vibration sensors are affected by the external environment. This paper proposes an anomaly detection algorithm that utilizes ADTK, a Python open source, for motor pump anomaly detection based on data collected through current sensors that are less affected by the external environment than noise, temperature and vibration sensors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.7
• /
• pp.1001-1005
• /
• 2002

In march 2002, Study Group on Long-Run Incremental Cost(LRIC) Model of Japan compiled its report. In this report shows there are three ways of inter-islands and island to land telecommunication service, radio communication, suboptic, communication satellite. Analysis of Japanese island network model is helpful in developing Korean island network model. The development of Korean island network model will make he useful costing of local loop unbundling, universal service fund and access charge.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.3
• /
• pp.143-147
• /
• 2005

Monitoring and diagnosis of the operating machines are very important for safety operation and maintenance in the industrial fields. These machines are most rotating machines and the diagnosis of the machines has been researched for long time. We can easily see the faulted signal of the rotating machines from the changes of the signals in frequency. The Linear Predictive Coding(LPC) is introduced for signal analysis in frequency domain. In this paper, we propose fault detection and diagnosis method using the Linear Predictive Coding(LPC) and residual signal energy. We applied our method to the induction motors depending on various status of faulted condition and could obtain good results.