• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.4
• /
• pp.73-78
• /
• 2020

The main reasons that ignite the propellant in the process of producing solid rocket motor are worker mistakes, wrong working process, mechanical defects, impact, friction, electrostatic and short circuits. In the past decades, many accidents have occurred in the process of producing solid rocket motor, accidents investigation have confirmed that the sensitivity of electrostatic is very high under specific condition. In this paper, we analyzed overseas accident cases and measured the sensitivity of electrostatic in the situation of confinement and pressure load by considering the manufacturing process. As a result of the test, the sensitivity of propellant was increased in the situation of confinement and pressure load and the propellant reacted more sensitively to electrostatic in the situation of confinement than pressure load.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.5
• /
• pp.379-384
• /
• 2018

This study showed the development process of structural design method of BHB(Blast Hardened Bulkhead) which are applicable in preliminary design stage. In the previous 1st report, the simplified structural scantling equations of BHB were formulated theoretically using the modified plastic hinge method supplemented by considering the membrane effects due to large plastic deformation. And the scantling methodology of plate thickness and section area of stiffeners of the curtain plate type BHB was dealt with. In the present 2nd report, derivation process of the correction factors which can adjust the developed scantling equations considering the uncertainties contained in the design parameters was introduced. Considering the actual BHB structures of 3 warship, the correction factors for the developed scantling equations for curtain plate type BHB were derived. Finally the applicability, validity of them and the strategy of future improvement were considered.

• 기계와재료
• /
• v.24 no.2
• /
• pp.110-121
• /
• 2012

유압식 무단변속기(HCVT : Hydraulic Type Continuous Variable Transmission)는 유압펌프와 유압모터의 용적변화에 의하여 무단변속이 이루어지므로 내부구조가 간단하고 변속충격도 거의 없다. 그리고 유압펌프와 유압모터는 작동압력을 높임으로써 출력비와 토크를 크게 향상시킬 수 있다. 그러나 기존 변속기에 비하여 콤팩트한 장점은 있지만 동력전달효율이 다소 떨어진다. 그리하여 연비보다는 한정된 공간, 기동력, 그리고 고출력을 요구하는 중 대형차량의 차세대 변속기로 널리 활용된다. 본 연구에서는 선진국의 무단변속기에 대한 연구동향을 정리하고 국내에서 연구 개발이 진행되고 있는 유압식 무단변속기의 작동원리, 기계장치의 내부구조, 그리고 유압장치의 변속기능을 소개한다. 또한 기계동력전달과 유압동력전달에 관련된 수식들을 유도하고 다양한 동력조건에서 시뮬레이션을 수행하여 유압식 무단변속기의 내 외부에서 생성되는 토크, 속도, 동력 등의 각종 물리량들을 분석한다. 이러한 정보들은 구성부품들의 선정 및 설계에 유용한 자료로 활용된다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.10a
• /
• pp.14-14
• /
• 1999

액체 램제트 엔진의 특성은 흡입구를 통해 들어오는 유입공기의 상태에 따라 많이 달라진다. 흡입구에 들어오는 공기의 유입각이 일정각도를 넘어서면 유입공기의 왜곡이 심하여 정상적인 연소가 불가능 할 수 있다. 따라서 다양한 비행조건에 따른 램제트 엔진의 특성을 파악하기 위하여 외부 유입영역, 흡입구, 연소기, 노즐 및 출구 대기 영역을 함께 계산하여 유동 특성과 연소 특성을 파악하고자 하였다. 흡입구는 마하 2.0을 기준으로 설계하고, 4각 덕트에서 완만하게 원형 덕트로 변화되는 확대관의 형상으로 비행체에 붙어 있는 것으로 격자를 구성하였다. 흡입구에서의 유동 조건은 비행체을 지난 유속이 마하 2.0과 2.2의 경우에 대하여 수치 실험을 수행하였으며, 비반응 유동 해석과 연소가 있는 반응 유동해석 결과를 흡입구를 포함하지 않았던 선행 연구 결과들과 비교하였다. 유입각이 영 일 때의 흡입구를 포함한 계산 결과는 흡입구에서 생성되는 충격파에 의한 손실로 총압력이 흡입구를 포함하지 않았던 선행 연구 결과와 차이가 있었으나 유동 특성에는 큰 차이가 없었다. 그러나 유입각이 증가함에 따라 흡입구로 유입되는 공기의 량이 감소하고 그에 따른 유동의 왜곡이 심하여 연소특성에 변화를 보여 주었다.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.51-53
• /
• 2004

온도보상용 적층 칩 캐패시터 제작에 있어 다음과 같은 실험 결과를 얻을 수 있었다. 적층 칩 캐패시터의 제작에 있어 용량은 재료자제의 유전율과 압력 조건에 따라 변화함을 볼 수 있으며 설계시 이를 고려해야 한다. 또한, 외부 전극의 경우 glss frit 선정이 중요한 변수임을 확인하였으며 $T_s$에 따라 glass frit을 선정하여야하며 열충격 및 소결성 향상을 위한 glass을 동시에 적용하는 것이 유리함을 확인하였다. Ni 내부전극 적용시의 고주파 특성을 검토한 결과 Pd 전극과는 유사한 경향을 보이나 Ag-Pd에 비해서는 우수한 손실특성을 보여주고 있다.

• Nuclear Engineering and Technology
• /
• v.24 no.1
• /
• pp.86-97
• /
• 1992

The purpose of this paper is to evaluate the direct vessel injection design from a pressurized thermal shock(PTS) viewpoint for the Combustion Engineering System 80+ A break of the main steam line from zero power and a 0.05 ft$^2$small break loss-of-coolant accident (LOCA) from full power were selected as the potential PTS events. In order to investigate the stratification effects in the reactor downcomer region, the fluid mixing analysis was performed using the COMMIX-IB code for steam line break and using the REMIX code for 0.05 ft$^2$small break LOCA. The stress distributions within the reactor vessel walls experiencing the pressure and the temperature transients were calculated using the OCA-P code for both events. The results of the analysis showed that a small break LOCA without decay heat presented the greatest challenge to the vessel, however, there is no crack initiation through end-of-life of the vessel with consideration of decay heat.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.159-166
• /
• 2011

Green house gas emissions are increasing as development of the industrial economy of the international community. Many countries in the world are endeavoring to reduce green house gas emissions under severe climate change. In order to protect grobal warming, government is trying to reduce green gas emissions under "Low Carbon Green Growth Policy" and investing climiate-firendly industries such as renewable energy harvesting. Renewable energy has been rapidly developing as a result of investment for development technology of using natural energy such as solar, wind, tidal, etc. There are lots of waste energy in the road space. However, nobody is not interested in waste energy from the road space. This paper present a fundamentally experimental study of energy harvesting technique to use waste energy in the road. The waste energy in the road is covered a pressure and impact of vehicles on the road, the radiant heat from asphalt pavement, road noise and vibration etc. In this study, an energy harvesting device using piezoelectric element is proposed and various tests are conducted to investigate a characteristic of this device as function of impact loading based on piezoelectric effect behavior. This paper shows the energy harvesting results of the device using domestic piezoelectirc element as a function of impact load size and pavement types.

• Journal of the Korea Convergence Society
• /
• v.10 no.8
• /
• pp.159-164
• /
• 2019

The front bumper of bobsleigh is mounted to alleviate the impact, but the air resistance to the bobsleigh depends on the body shape positioned in front. This study was conducted the flow analyses about three kinds of bobsleigh configurations. Models B and C with the sharp type of the front can reduce the air resistance than model A with the round type of the front. And the type that the back of the bumper narrows can generate a flow smoother than the one widening. It is thought that the results of this study can be devoted at ensuring the body design to reduce the flow resistance most at bobsleigh. As the design data with the durability of bobsleigh obtained on the basis of this study result are utilized, the esthetic sense can be shown by being grafted onto the machine or structure at real life.

• Journal of the Korean Institute of Gas
• /
• v.17 no.2
• /
• pp.85-89
• /
• 2013

The purpose of the development of KC-1 LNG cargo containment system is reduction in royalty and increase in competitiveness of shipbuilding industry. An assessment of structure safety for LNG cargo containment system under sloshing load due to ship motion has become an important design element. The ideal way is to implement fully interaction of the fluid domain and the cargo containment system. However the irregular sloshing pressure were idealized in the form of a triangular wave for safety assessment because the fluid- structure interaction analysis is taken the extensive computation time and difficult to ensure the accuracy of the results. In this study, the sloshing load was assumed to be a triangular wave with a maximum pressure of 10 bar during 15/1000 seconds. In the analytic results, the basic insulation panel of KC-1 LNG cargo containment system was assessed to be structurally safe for sloshing load.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.387-397
• /
• 2009

Physical activity has been increased with increased leasure time. Specifically, due to our mountainous geographical benefits, people actively participate in hiking and climbing as regular daily activities. Thus, more stable and comfortable hiking boots are required to walk on uneven and sloped rocky surface for a long period of time. 5 male subjects were recruited for testing planter pressure patterns of four different conditions(barefoot, classic hiking boot, stiffness 60 and stiffness 65). Tested hiking boots(stiffness 60 and stiffness 65) consists of the multiple pieces of outsoles as they are designed for a better shock absorption. In the results, some positive aspects of stiffness 60 and stiffness 65 such as wide contact area and powerful propulsive patterns at take off was observed compared to the classic hiking boots. Therefore, biomechanical development of hiking related clothes and footwear as well as equipment would be beneficial for people who enjoy hiking to maximize their quality of activities.