• Title/Summary/Keyword: 설계 가이드 라인

Search Result 545, Processing Time 0.03 seconds

A Design and Algorithm Implementation of Waveguide for 3way Line Array Speaker (3way 라인어레이 스피커를 위한 웨이브가이드 알고리즘 구현 및 설계)

  • Hwang, Jee Won;Kim, ByunKon;Cho, Juphil
    • The Journal of Korea Institute of Information, Electronics, and Communication Technology
    • /
    • v.13 no.1
    • /
    • pp.1-7
    • /
    • 2020
  • Directivity control technology of sound system is a key technology for improving sound quality. Providing a line source rather than a point source in an acoustic system can reduce the effects of attenuation interference at long distances, thereby providing high quality sound. In particular, A line-array speaker system can be used to provide coherent, high-quality sound over long distances. However, high frequencies have shorter wavelengths, so the distance between the speakers of a line array system must be shorter, but there are physical limitations. In this paper, we designed a wave guide and installed it in the speaker's compression driver to solve this problem. We measured and tested various acoustic characteristics to verify the performance of the speaker. As a result, when the line array sound system is constructed using the developed speakers, it is possible to provide a line source in all areas including the treble range, thereby achieving the same effect as a single extended source and providing high quality sound up to far distances.

Design Guideline of Height-adjustable Wash Basin for Persons with Disability (고령자 및 장애인용 높이조절 세면기의 설계 가이드라인)

  • Bae, Ju-Hwan;Moon, Inhyuk
    • Journal of rehabilitation welfare engineering & assistive technology
    • /
    • v.11 no.4
    • /
    • pp.349-354
    • /
    • 2017
  • In this study, we proposed a design guideline of height-adjustable wash basin which is an assistive product for personal hygiene for persons with disability. We performed biomechanical assessments using both of conventional and prototype height adjustable wash basin. Total five elderly subjects (all male, age $68.6{\pm}4.3yrs.$, height $169.8{\pm}5.7cm$, weight $70{\pm}7.7kg$) participated for the assessment test. Each joint angles were measured by using a 3D motion capture system when subjects use wash basins, and the lumbar moment of each subjects was estimated based on a human body model. From the assessment results, a design guideline which has the range of the height from 652[mm] to 1162[mm] was proposed. Then additional assessment tests with five healthy subjects ($25.8{\pm}1.8yrs.$, $175.5{\pm}5.8cm$, $74{\pm}15.7kg$) were performed in order to verify effectiveness of the design guideline. The results showed a height-adjustable wash basin applied the proposed design guideline was effective to reduce the lumbar moment.

Radiation Safety Management Guidelines for PET-CT: Focus on Behavior and Environment (PET-CT의 방사선안전관리 가이드라인 개발: 행위와 환경을 중심으로)

  • Jung, Jin-Wook;Han, Eun-Ok
    • Journal of Radiation Protection and Research
    • /
    • v.36 no.3
    • /
    • pp.140-147
    • /
    • 2011
  • Our purpose is to specify behavior and environmental factors aimed at reducing the exposed dosage caused by PET-CT and to develop radiation safety management guidelines adequate for domestic circumstances. We have used a multistep-multimethod as the methodological approach to design and to carry out the research both in quality and quantity, including an analysis on previous studies, professional consultations and a survey. The survey includes responses from 139 practitioners in charged of 109 PET-CTs installed throughout Korea(reported by the Korean Society of Nuclear Medicine, 2010). The research use 156 questions using Cronbach's ${\alpha}$ (alpha) coefficients which were: 0.818 for "the necessity of setting and installing the radiation protective environment"; 0.916 for "the necessity of radiation protection", "setting and installing the radiation protective environment"; and 0.885 for "radiation protection". The check list, derived from the radiation safety management guidelines focused on behavior and environment, was composed of 20 items for the radiation protective environment: including 5 items for the patient; 4 items for the guardian; 3 items for the radiologist; and 8 items applied to everyone involved; for a total of 26 items for the radiation protective behavior including: 12 items for the patient; 1 item for the guardian, 7 items for the radiologist; and 6 items applied to everyone involved. The specific check list is shown in(Table 5-6). Since our country has no safety management guidelines of its own to reduce the exposed dosage caused by PET-CTs, we believe the guidelines developed through this study means great deal to the field as it is not only appropriate for domestic circumstances, but also contains specific check lists for each target who may be exposed to radiation in regards to behavior and environment.

Framework Development for the U-Eco City Construction Guideline (U-Eco City 구축 가이드라인 프레임워크 개발)

  • Kang, Young-Ok;Pi, Min-Hee;Cho, A-Ra;Lee, Joo-Yun
    • Journal of Korea Spatial Information System Society
    • /
    • v.12 no.1
    • /
    • pp.85-93
    • /
    • 2010
  • The goal of U-Eco City testbed is improving the technical completion of ubiquitous technology/Services which have been developed in other core projects in U-Eco City, by implementing newly developed ubiquitous technology/Services to testbed. When the newly developed ubiquitous technology/Services are implemented in the testbed, we will monitor whether the developed ubiquitous technology/Services can be applied in the real situation and if they have problems we will find out the solution to solve the problems. Final goal of this reaserch is framework development for the U-Eco City construction guideline. We developed the framework development for the U-Eco City construction guideline by i)analyzing steps for construction of U-Eco City, ii) analyzing details of each steps for construction of U-Eco City, and iii) including results of research which have been developed in other core projects in U-Eco City.

Development of HMI(Human-Marchine Interface) Assessment System and Derivation of Design Variables for Vehicle Navigation System (자동차 항법장치 인간-기계 인터페이스 평가시스템 개발 및 설계 변수 추출에 관한 연구)

  • Cha, Du-Won;Lee, Je-Geun;Park, Beom;Lee, Seung-Hwan
    • Journal of Korean Society of Transportation
    • /
    • v.15 no.2
    • /
    • pp.35-48
    • /
    • 1997
  • 항법장치 인간-기계 인터페이스(HUMAN-Machine Interface)는 운전자의 편안함과 안전, 수행도 및 시스템의 사용성, 도로, 안전의 향상 등을 위한 중요한 요소로 인식되고 있 다. 그러므로 항법장치 인간-기계 인터페이스 체계가 운전자와 교통에 미치는 영향은 직접 적인 항법장치의 시장성 확보와 첨단교통체계의 전개와 성공에 영향을 미치는 중요한 기술 로 떠오르고 있으며, 특히 선진국의 인간-기계 인터페이스 표준의 연구 및 제정의 노력으로 인해 항법장치의 인간-기계 인터페이스 설계 및 평가를 위한 가이드라인과 효율적인 평가 방법의 개발이며, 이들의 데이터베이스화 역시 설계 및 평가 효율향상을 위한 기본적으로 중요하게 여겨지는 연구과제이다. 본 논문은 기존 항법장치 인간공학적 평가 방법들의 비교 평가를 통해서 적합한 항법장치의 평가방법론과 추출된 항법장치 인간-기계 인터페이스 설 계 변수를 제시하며, 이들을 가이드라인화하여 데이터베이스화 할 수 있도록 설계된 Navi HEGS(Navigation HMI Evaluation & Guideline System)에 대하여 기술한다. 또한 실험을 통하여 본 논문에서 제시된 주관적 평가 방법인 RNASA-TLX(Revision of NASA-Task Load Index)와 운전자의 시각분석의 결과를 본 시스템을 사용하여 분석 제시하며, 이들을 통해 국내 항법장치 인간-기계 인터페이스 연구의 기반을 제시하고자 한다.

  • PDF

Characterization and design guideline for neuron-MOSFET inverters (Neuron-MOSFET 인버터의 특성 분석 및 설계 가이드라인)

  • Kim, Sea-W.;Lee, Jae-K.;Park, Jong-T.;Jeong, Woon-D.
    • Journal of IKEEE
    • /
    • v.3 no.2 s.5
    • /
    • pp.161-167
    • /
    • 1999
  • 3-input neuron-MOSFET inverters and 3-bit D/A converters using enhancement type device have been designed and fabricated by using standard 2-poly CMOS process. The voltage transfer curve and the noise margin of neuron-MOSFET inverters have been measured and characterized as the same method in normal CMOS inverters. From the theoretical calculation of the effects of coupling ratio on the voltage transfer curve and noise margin, we set up the design guideline for the gate oxide thickness and input gate layout in neuron-MOSFET inverters. BT using one of input gates as a control gate, we can design and fabricate the neuron-MOSFET D/A converter without offset voltage.

  • PDF

Comprehensive Analysis of Hardware Architectures of Pipeline FFT Processor (파이프라인 FFT 프로세서 설계을 위한 하드웨어 구조 분석)

  • Jung, Sung-Wan;Jeong, Yong-Jin
    • Proceedings of the IEEK Conference
    • /
    • 2008.06a
    • /
    • pp.429-430
    • /
    • 2008
  • FFT(Fast Fourier Transform)는 멀티미디어 통신 및 디지털 신호처리 분야, 특히 무선통신이나 디지털 방송 등에서 쓰이는 OFDM(Orthogonal Frequency Division Multiplexing)에서 필수적인 역할을 하고 있다. 본 논문에서는 파이프라인 FFT 프로세서 설계의 다양한 알고리즘 및 하드웨어 구조에 대해 살펴보고 이를 한 눈에 파악할 수 있는 설계 가이드라인을 제시한다. 또한 분석 중 Radix-2 Single-path Delay Feedback의 복소곱셈기의 비효율적인 면을 찾고 새로운 R2SDF 구조를 제안한다.

  • PDF

Characteristics of Inclusive Playground Guidelines (통합놀이터 가이드라인의 특성)

  • Kim, Yun-Geum;Kim, Hana;Maeng, Soo-hyun
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.46 no.6
    • /
    • pp.75-84
    • /
    • 2018
  • The inclusive playground is a playground where disabled children and non-disabled children can play together, not a playground for the disabled. It started with the change of social awareness of the citizenship rights of disabled people in the 1960s and the resulting playgrounds. Since then, inclusive playgrounds have been developed in many countries, and these are organized in the form by guidelines. In Korea, social interest in inclusive playgrounds is increasing, but there are no systematic guidelines in Korea, and the application of overseas cases or guidelines is limited. The purpose of this study is to classify the concept of inclusive playgrounds and design guidelines, that were previously presented in inclusive playground design guideline of various countries and analyze the characteristics of, design scope, and design principles, and provide a basic framework for creating guidelines. The purpose of the design guideline was to present specific numerical values to the inclusive playground design guidelines, to link with academic research and industrial products, to present pursuit values, and to expand the value of pursuing design methods. The contents were covered by scope, conceptualization, principles of design and design process, design guidelines, and checklists. Most of the guideline covers specific autonomous governments or countries that can apply the related systems or laws, but the composition of the detailed contents is different. The guiding value of inclusive playgrounds presented in each guideline is not a playground for the disabled but a playground for all, and some guidelines refer to the difficulty in playgrounds considering non-disabled children. Based on these concepts, design guidelines are presented in each guideline. Improving the accessibility in design principles is a common theme and adds to the principles of safety, independence, convenience, and playability. None of the guidelines do not provide design guidelines. Although there is a difference in the degree and method of specificity provided by each of the guidelines, the design guidelines can be generally summarized as space, copper line, and unit facilities. As mentioned in many guidelines, an inclusive playground is not only a playground for children with disabilities. Therefore, in the design guidelines, it is also important to the support play of children with disabilities and to induce inclusive play. The design guidelines presented in the guideline can be rearranged into three stages of 'supporting the play of children with disabilities', 'securing the dimensions and materials of spaces and facilities', 'adding auxiliary devices' and 'designing new facilities'. There are three design guidelines for inducing inclusive play. First, by creating various difficulty levels and intersecting spaces, children with various abilities can play with each other, and at the same time, they can interact witheach other. Second, all children can cooperate and play without distinction between children with disabilities and non-disabled children. Finally, the guardian provides the conditions for efficient support so that the disabled child can fully enjoy the inclusive playground.

Network Simulation and Design Guideline for VoIPv6 Network of U-Army (U-Army의 VoIPv6 망 성능 시뮬레이션을 이용한 망 설계 방안)

  • Lee, Hyun-Duck;Min, Sang-Won
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.33 no.10B
    • /
    • pp.904-910
    • /
    • 2008
  • In this paper, we consider the military requirement, study the military network services and their related traffic parameters, evaluate the performance the experimental army network and then suggest the design guideline of applying VoIP to the whole military. We evaluate the performance of the delay and loss in the viewpoint of packet and call levels for the several scenarios. First, the performances of separate network service were considered and the satisfaction of the requirement was obtained. Secondly, the delays and losses of the integrated network services were calculated as the amount of the background traffic increases. Finally, based on the simulation results, we presented the design guideline which classified network configurations for applying VoIP equipment and helped estimate the number of VoIP terminals in the existing link.

Effects of PCB Patterns on EMI Measurement in TEM Cell and Proposal of PCB Design Guidelines (TEM 셀에서 PCB 패턴이 EMI 측정에 미치는 영향 및 PCB 설계 가이드라인 제시)

  • Choi, Minkyoung;Shin, Youngsan;Lee, Seongsoo
    • Journal of IKEEE
    • /
    • v.21 no.3
    • /
    • pp.272-275
    • /
    • 2017
  • Recently, semiconductor integration density enormously increases and its interconnection width is significantly narrowed, which leads to EMI (electromagnetic interference) problems on chip level. Chip manufacturer exploits TEM cell (transverse electromagnetic cell) to measure EMI on chip level, which requires PCB (printed circuit board) for measurement purpose. However, it is often neglected to consider that PCB patterns and other factors can affect on EMI measurement. In this paper, several test patterns are designed for different PCB design variables, and effects of PCB patterns on EMI measurement in TEM cell are analyzed. Based on these analyses, PCB design guidelines are also proposed to minimize the effects on EMI measurements.