• Journal of The Korean Association For Science Education
• /
• v.37 no.1
• /
• pp.87-101
• /
• 2017

The analysis was carried out with meta-analysis on master's and doctoral dissertations, and academic journals that analyzed the effects of STEAM education between 2012 and 2015. From the total number of 75 dissertations and articles analyzed, 183 different effect sizes were calculated. The analysis was done to find out the kinds of differences that would be created according to the effect size of creativity, problem-solving ability, and researcher, target area, student division research design type, and level of schools. The total effect size of creativity scored 0.776, and demonstrated satisfaction in symmetry of funnel plot, with no publication biases. The fail-safe N scored 780, and since the number is smaller than 8,945, the results of this research has credibility. Furthermore, problem-solving ability shows intermediate level of effect size with a score of 0.584. It also showed satisfaction in symmetry with funnel plot, with no publication bias. With the different research methods of the sub-factors of creativity, fluency scored the highest with 0.929, flexibility with 0.881, originality with 0.838, sophistication with 0.653, abstractness with title 0.705, and resistance to termination, 0.527. This study finds its significance in the demonstration of average effect size of STEAM education through meta-analysis. According to research results, the effects of inclusive education could be determined, yet the specific effect cause or learning principles were difficult to find. It was found that the effects of STEAM education do not rise or fall depending on school age, and demonstrated differences in creativity according to the research methods or the researchers.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.9
• /
• pp.1388-1398
• /
• 2015

Quality Function Deployment (QFD) is the most complete and comprehensive method for translating what customers need from a product. This study utilized QFD to develop sauces made from Gochujang and to determine how to fulfill international customers' requirements. A customer survey and expert opinion survey were conducted from May 13 to August 22, 2014 and targeted 220 consumers and 20 experts in the U.S. and China. Finally, a total of 208 (190 consumers and 18 experts) useable data were selected. The top three customer requirements for Gochujang sauces were identified as fresh flavor (4.40), making better flavor (3.99), and cooking availability (3.90). Thirty-three engineering characteristics were developed. The results from the calculation of relative importance of engineering characteristics identified that 'cooking availability', 'free sample and food testing', 'unique concept', and 'development of brand' were the highest. The relative importance of engineering characteristics, correlation, and technical difficulties are ranked, and this result could contribute to the development Korean sauces based on customer needs and engineering characteristics.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.309-315
• /
• 2009

Maintenance of adequate soil water content during the period of crop growth is necessary to support optimum plant growth and yields. A better understanding of soil water movement for precision irrigation would allow efficient supply of water to crops, thereby resulting in minimization of water drainage and contamination of ground water. This research reports on the characterization of spatial and temporal variations in water contents through three different textured soils, such as loam, sandy loam, and loamy sand, when water is applied on the soil surface using an one-line drip irrigation system and the soils are dried after the irrigation stops, respectively. Water contents through each soil profile were continuously monitored using three Sentek probes, each consisting of three capacitance sensors at 10, 20, and 30cm depths. Spatial variability in water content for each soil type was strongly influenced by soil textural class. There were big differences in wetting pattern and the rate of downward movement between loam and sandy loam soils, showing that the loam soil had a wider wetting pattern and a slower rate of downward movement than did the sandy loam soil. The wetting pattern in loamy sand soil was not apparent due to a low variability in water content (< 10%) by a lower-water holding capacity as compared to those measured in the loam and sandy loam soils, implying that the rate of water drainage below a depth of 30cm was high. When soils were dried, there were highly exponential relationships between water content and time elapsed after irrigation stops ($r^2$${\geq}$0.98). It was estimated that equilibrium moisture contents for loam, sandy loam, and loamy sand soils would be 17.6%, 6.2%, and 4.2%, respectively.

• Korean Journal of Health Education and Promotion
• /
• v.24 no.5
• /
• pp.119-135
• /
• 2007

Objectives: The efficacy, feasibility, and safety of bench-step aerobics (BSA) program in overweight or obese Korean adult women have been implied. However, there has been almost no evidence for its psychological benefits. As such, the purpose of this study was to investigate the psychological benefits of BSA program in overweight or obese (body mass index ${\geq}\;23\;kg/m^2$) Korean adult women. Method: Anger, exercise self-efficacy, exercise-related affect, and body image of overweight or obese women who participated in a 12-week BSA program (n=15) were compared with those of their counterparts in the control group (n=13). Subjects were selected among public health center visitors and those recruited by putting an advertisement in local newspapers and the public health center homepage. Data from the exercise and control groups were collected before and after the 12-week BSA program (from August to November in 2006) at the public health centers. The exercise program consisted of 45 to 60 min moderate-intensity (40/50 to 50/60% of their hear rate reserve) BSA performed for 3 days a week. Results: After the BSA program, body image of the subjects in the exercise group was significantly improved and there was a significant difference between the exercise and control groups. Anger, exercise self-efficacy, and exercise-related affect were improved after the BSA program but the changes did not reach the level of statistical significance and there were no significant differences between the exercise and control groups. Conclusions: In conclusion, BSA appears to significantly enhance body image in overweight or obese Korean adult women but its effects on anger, exercise self-efficacy, and exercise-related affect do not appear to be statistically significant. Further studies involving different subjects, particularly whose levels of anger are high or whose levels of exercise-related affect are low to exclude the influence of the ceiling or floor effect, are warranted in a randomized controlled design.

• Progress in Medical Physics
• /
• v.10 no.2
• /
• pp.63-71
• /
• 1999

For the purpose of utilization in 3-D conformal radiotherapy and whole body radiosurgery, the Whole Body 3-Dimensional Topographic Radiation Therapy System has been developed. Whole body frame was constructed in order to be installed on the couch. Radiopaque catheters were engraved on it for the dedicated coordinate system and a MeV-Green immobilizer was used for the patient setup by the help of side panels and plastic rods. By designing and constructing the whole body frame in this way, geometrical limitation to the gantry rotation in 3-D conformal radiotherapy could be minimized and problem which radiation transmission may be altered in particular incident angles was solved. By analyzing CT images containing information of patient setup with respect to the whole body frame, localization and coordination of the target is performed so that patient setup error may be eliminated between simulation and treatment. For the verification of setup, the change of patient positioning is detected and adjusted in order to minimize the setup error by means of comparison of the body outlines using 3 CCTV cameras. To enhance efficiency of treatment procedure, this work can be done in real time by watching the change of patient setup through the monitor. The method of image subtraction in IDL (Interactive Data Language) was used to visualize the change of patient setup. Rotating X-ray system was constructed for detecting target movement due to internal organ motion. Landmark screws were implanted either on the bones around target or inside target, and variation of target location with respect to markers may be visualized in order to minimize internal setup error through the anterior and the lateral image information taken from rotating X-ray system. For CT simulation, simulation software was developed using IDL on GUI(Graphic User Interface) basis for PC and includes functions of graphic handling, editing and data acquisition of images of internal organs as well as target for the preparation of treatment planning.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.1
• /
• pp.10-20
• /
• 2012

Purpose: The purpose of this study was to investigate the stress distribution in mandibular implant-supported overdentures and tooth-supported overdentures with telescopic crowns. Materials and methods: The assumption of this study was that there were 2, 3, 4 natural teeth and implants which are located in the second premolar and canine regions in various distributed conditions. The mandible, teeth (or implants and abutments), and connectors are modeled, and analyzed with the commercial software, ANSYS Version 10.1. Stress distribution was evaluated under 150 N vertical load bilaterally on 3 experimental conditions - between canine areas, canine and $2^{nd}$ premolars, 10 mm posterior to $2^{nd}$ premolars. Results: Overall, the case of the implant group showed more stress than the case of the teeth group in stress distribution to bone. In stress distribution to superstructures of tooth and implants, there was no significant difference between TH group and IM group and the highest stress appeared in TH-IV and IM-IV. The stress caused from bar was much higher than those of implant and tooth. TH group showed less stress than IM group in stress distribution to abutment teeth and implant. Conclusion: The results shows that it is crucial to make sure that distance between impact loading point and abutment tooth does not get too far apart, and if it does, it is at best to set abutment tooth on premolar tooth region. It will be necessary to conduct more experiments on effects on implants, natural teeth and bone, in order to apply these results to a clinical treatment.

• Journal of The Korean Association For Science Education
• /
• v.40 no.2
• /
• pp.177-189
• /
• 2020

In this study, we implemented an education program to improve the responsive teaching ability of pre-service science teachers, and analyzed the responsive teaching practices revealed during the program process. Through this, we derived the types and characteristics of responsive teaching practice, identified factors that made it difficult for pre-service teachers to practice, and obtained empirical data on under what conditions the responsive teaching capacity of pre-service teachers was developed. For this purpose, a practice-based teacher education program was designed and carried out for 14 pre-service teachers who had no experience in responsive teaching. The program consists of four steps; observation of class, practice through rehearsal, application in practicum, and post-reflection on educational practice. In particular, qualitative analysis was conducted on the types of responsive teaching and their detrimental factors revealed during application in practicum. As a result of the analysis, four types were derived; discriminator type, communicator type, guide type, and facilitator type. Each type was identified as having a common responsive teaching step element. The education program implemented in this study was effective for pre-service teachers to recognize the importance of student-participation class and the educational effect of responsive teaching. However, three barriers that prevented pre-service teachers from responsive teaching practice were also analyzed. First was the pressure to achieve specific learning goals within a given class time. Second was the rigid belief of the fixed curriculum. Third was the obsession that the teacher should lead the class. Based on these results, it was suggested that in order to improve the responsive teaching ability of pre-service teachers, it is necessary to support the recognition of breaking out of the thinking the time constraint, the flexibility of the curriculum, and the role of teacher as a class supporter.

• Progress in Medical Physics
• /
• v.14 no.1
• /
• pp.15-19
• /
• 2003

High dose rate (HDR) brachytherapy for treating a cervix carcinoma has become popular, because it eliminates many of the problems associated with conventional brachytherapy. In order to improve the clinical effectiveness with HDR brachytherapy, a dose calculation algorithm, optimization procedures, and image registrations need to be verified by comparing the dose distributions from a planning computer and those from a phantom. In this study, the phantom was fabricated in order to verify the absolute doses and the relative dose distributions. The measured doses from the phantom were then compared with the treatment planning system for the dose verification. The phantom needs to be designed such that the dose distributions can be quantitatively evaluated by utilizing the dosimeters with a high spatial resolution. Therefore, the small size of the thermoluminescent dosimeter (TLD) chips with a dimension of <1/8"and film dosimetry with a spatial resolution of <1mm used to measure the radiation dosages in the phantom. The phantom called a pelvic phantom was made from water and the tissue-equivalent acrylic plates. In order to firmly hold the HDR applicators in the water phantom, the applicators were inserted into the grooves of the applicator holder. The dose distributions around the applicators, such as Point A and B, were measured by placing a series of TLD chips (TLD-to-TLD distance: 5mm) in the three TLD holders, and placing three verification films in the orthogonal planes. This study used a Nucletron Plato treatment planning system and a Microselectron Ir-192 source unit. The results showed good agreement between the treatment plan and measurement. The comparisons of the absolute dose showed agreement within $\pm$4.0 % of the dose at point A and B, and the bladder and rectum point. In addition, the relative dose distributions by film dosimetry and those calculated by the planning computer show good agreement. This pelvic phantom could be a useful to verify the dose calculation algorithm and the accuracy of the image localization algorithm in the high dose rate (HDR) planning computer. The dose verification with film dosimetry and TLD as quality assurance (QA) tools are currently being undertaken in the Catholic University, Seoul, Korea.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.2
• /
• pp.47-61
• /
• 2009

The purpose of this study was to understand the laws related to the safety management of children's play facilities(LRSMCPF) including the "Safety Supervision Law of Children's Play Facilities(SSLCPF)" and the "Quality Management and Industrial Products Safety Management Law(QMIPSAL)", in order to analyze the problems by 4 phases-development of products, landscape design, landscape construction and maintenance considering landscape project procedure-and to propose a revision of the laws. The results are as follows: 1. The various LRSMCPF, SSLCPF and QMIPSAL, as basic laws for the safety management of children's play facilities, were insufficient regarding the features of children's play facilities and play spaces, which are both comparatively varied and complex. 2. In development of products, the one-year duration of safety certification based on QMIPSAL was too short and the procedure for safety certification were redundant in both products and plants inspection, and export and import product inspection. 3. The field inspection of construction sites based on SSLCPF was repeated with quality control and a consultation of rules based on "Construction Technology Management Law". 4. There are not enough safety inspection organizations regarding children's play facilities to meet the demand of safety certification, safety inspection, and safety education in the near future. 5. For children's play safety, the establishment of a general safety management system for children's play connected with the phases is needed to ensure safe play equipment, to construct safe playgrounds, and to manage play facilities. The criteria, regulations, and procedure regarding safety certification and safety inspection of play facilities must be revised efficiently and standardized to a global level as well. To improve the system and contents of safety certification and inspection, authorization of safety inspection organizations based on landscape architecture is needed. Further study will be required to concretely analyze in detail the laws, enforcement decrees and rules, and ordinances that consider the practical experience of professional landscape architects, inspectors, and lawyers.

• The KIPS Transactions:PartA
• /
• v.11A no.4
• /
• pp.243-250
• /
• 2004

Monitoring is used to see if a real-time system provides a service on time. Generally, monitoring for real-time focuses on investigating the current status of a real-time system. To support a stable performance of a real-time system, it should have not only a function to see the current status of real-time process but also a function to predict executions of real-time processes, however. The legacy prediction model has some limitation to apply it to a real-time monitoring. First, it performs a static prediction after a real-time process finished. Second, it needs a statistical pre-analysis before a prediction. Third, transition probability and data about clustering is not based on the current data. We propose the execution prediction model based on learning algorithm to solve these problems and apply it to real-time monitoring. This model gets rid of unnecessary pre-processing and supports a precise prediction based on current data. In addition, this supports multi-level prediction by a trend analysis of past execution data. Most of all, We designed the model to support dynamic prediction which is performed within a real-time process' execution. The results from some experiments show that the judgment accuracy is greater than 80% if the size of a training set is set to over 10, and, in the case of the multi-level prediction, that the prediction difference of the multi-level prediction is minimized if the number of execution is bigger than the size of a training set. The execution prediction model proposed in this model has some limitation that the model used the most simplest learning algorithm and that it didn't consider the multi-regional space model managing CPU, memory and I/O data. The execution prediction model based on a learning algorithm proposed in this paper is used in some areas related to real-time monitoring and control.