• Proceedings of the Korean Association for Survey Research Conference
• /
• 2005.12a
• /
• pp.91-113
• /
• 2005

본 연구는 청년들의 취업 및 실업 경험이 정신건강에 어떠한 영향을 미치는지 종단적으로 알아보는 데 목적이 있다. 구체적으로 대학을 졸업하고 난 이후에 지속적으로 미취업 상태로 남아있는 사람들의 정신건강의 문제 그리고 취업에 성공하는 경험이 정신건강에 미치는 영향을 미치는지 알아보고자 한다. 이를 위해서 국내 대학교 4학년생들을 대상으로 1차 조사를 실시하고 이후 약 6개월 간격으로 2차 조사, 3차 및 4차 조사를 실시하였다. 네 시점에서 모두 응답자들의 취업여부와 정신건강 수준을 측정하였다. 4차 조사까지 모두 응답한 560명 중에서 2차, 3차, 및 4차 시점의 취업여부에 의해서 집단을 다음과 같이 나누었다: 2차, 3차 및 4차 시점 순서대로, 모두 취업 상태인 집단('취업-취업-취업 집단'), 3차 시점에서 취업에 성공한 집단('미취업-취업-취업 집단'), 4차 집단에서 취업에 성공한 집단('미취업-미취업-취업집단') 그리고 모두 미취업 상태인 집단('미취업-미취업-미취업 집단'). 그 결과를 보면, 취업-취업-취업 집단의 경우에는 취업에 성공한 2차 시점에서 정신건강 수준이 상당히 좋아졌다가 3차 및 4차 시점에서 다시 본래 수준으로 돌아가는 경향을 보였다. 미취업-취업-취업 집단의 경우에는 취업에 성공한 3차 시점 이후로, 미취업-미취업-취업 집단의 경우에는 취업에 성공한 4차 시점에서 정신건강 수준이 좋아지는 경향을 보였다. 지속적으로 미취업 상태였던 집단에서는 3차 시점에서 정신건강 수준이 상당히 나빠졌다가 여전히 미취업 상태인 4차 시점에서 오히려 완화되는 경향을 보였다. 본 연구의 시사점과 제한점 및 장래 연구의 과제가 논의되었다.iments and numerical analysis of luminescence efficiency in the hole carrier transport layer's thicknes. 나아갈 것이며, 아울러 향후에도 아직 미흡한 분야인 IT 아웃소싱에서 적정수준의 대가지급 방안 및 바람직한 Relationship 에 영향을 미치는 여러 가지 요인에 대해서도 살펴 봄으로써 IT분야의 Outsourcing을 검토하거나, 추진할 때 도움이 될 수 있도록 하고자 한다.개의 총 297개의 데이터를 추출하여 사용하였다. 실험과는 좌측공격 91.7%, 우측공격 100%, 중앙공격 87.5%, 코너킥 97.4%, 프리킥 75%로서 매우 양호한 인식율을 보였다. 사용경험정도가 가입직후 해지에만 영향을 미치는 요인임을 보여준다. 또한 매체의 정보전달 풍부성 (media richness)이 상대적으로 높은 소매점이나 웹사이트를 통해 서비스에 가입한 소비자일수록 가입 직후뿐만 아니라 서비스사용 이후에도 낮은 해지성향을 나타냈다. 이러한 분석결과를 바탕으로 인터넷전화 서비스에 적합한 고객지원 프로그램 설계와 마케팅 매체선정과 관련한 전략적 시사점을 도출한다. 그리고 국내에서 최근 이슈가 되고 있는 차세대 무선인터넷 서비스인 와이브로 출시에 따른 마케팅 및 고객관리와 관련된 시사점을 논의한다.는 교합면에서 2, 3, 4군이 1군에 비해 변연적합도가 높았으며 (p < 0.05), 인접면과 치은면에서는 군간 유의차를 보이지 않았다 이번 연구를 통하여 복합레진을 간헐적 광중합시킴으로써 변연적합도가 향상될 수 있음을 알 수 있었다.시장에 비해 주가가 비교적 안정적인 수준을 유지해 왔다고 볼

• Magazine of the Korea Concrete Institute
• /
• v.10 no.6
• /
• pp.335-343
• /
• 1998

Recently, new experimental criteria for reinforced concrete frame structures in high seismic regions have been reported in United States. The objective of the criteria is to get more reliable test data which are valid to compare with other test data done by different researchers. The criteria precribe test method of specimens, analysis method of test data, and limiting values needed to specimens like drift angle, energey dissipation ratio, stiffness, and strength. These criteria might be usefel to get objective conclusion. Shear wall structures, which belong to one of earthquake resisting systems, also need this kind of criteria. But, the general response of shear wall structures is a little bit different from that of frame structures since shear wall restrains the horizontal displacement caused by horizontal force and increases the stiffness and strength. The objective of this paper is to propose a criterion for limiting drift and energy dissipation ratio of shear walls based on structural testing. These are the most important values for presenting the capacity of shear walls. Limiting drift and energy dissipation ratios were examined for tests on shear walls having ductile type failures. Test data were analyzed and compared to the results for a suggested acceptance criteria that involve a limiting drift that is a function of aspect ratio and a limiting energy dissipation ratio that is a function of displacement ductility and damping.

• Journal of Food Hygiene and Safety
• /
• v.32 no.3
• /
• pp.199-205
• /
• 2017

Although many PCR-based assays have been developed, the majority of rapid detection of Toxoplasma gondii in animal and their meat product has been dependent on immunogenic assays. Thus, there is still a need for more reliable PCR based detection method for T. gondii in retail meats. Recently, a 529-bp repeat element that exists in 200-300 copies per genome of T. gondii genome had been spotlighted for its usefulness as potential detection targers. In this study, the 529-bp repeat element was selected for real-time PCR to detect three types of T. gondii (type I, II and III). A primer pair targeting 82-bp of the 529-bp element detected all three types of T. gondii and showed high level of specificity against 14 different food-borne pathogens as well as 3 protozoan parasites such as Giardia lamblia, Cryptosporidium parvum and Entamoeba histolytica. Application of the new real-time PCR assay in meat samples showed improved detection sensitivity compared to the B1-gene targeted method suggesting potential new target for Toxoplasma gondii screening in retail meats.

• Journal of the Korean Society for information Management
• /
• v.24 no.2
• /
• pp.161-179
• /
• 2007

As increasingly diverse kinds of information materials are available on the Internet, it becomes a challenge to define an adequate level of metadata provision for each different type of material in the context of digital libraries. This study explores issues of metadata provision for a particular type of material, statistical tables. Statistical data always involves numbers and numeric values which should be interpreted with an understanding of underlying concepts and constructs. Because of the unique data characteristics, metadata in the statistical domain is essential not only for finding and discovering relevant data, but also for understanding and using the data found. However, in statistical metadata research, more emphasis has been put on the question of what metadata is necessary for processing the data and less on what metadata should be presented to users. In this study, a case study was conducted to gauge the status of metadata provision for statistical tables on the Internet. The websites of two federal statistical agencies in the United States were selected and a content analysis method was used for that purpose. The result showing insufficient and inconsistent provision of metadata demonstrate the need for more discussions on statistical metadata from the ordinary web users' perspective.

• Korean Journal of Optics and Photonics
• /
• v.23 no.4
• /
• pp.167-171
• /
• 2012

This paper reports on the stray light analysis results of a compact imaging spectrometer (COMIS) for a microsatellite STSAT-3. COMIS images Earth's surface and atmosphere with ground sampling distances of 27 m at the 18~62 spectral bands (0.4 ~ 1.05 ${\mu}m$) for the nadir looking at an altitude of 700 km. COMIS has an imaging telescope and an imaging spectrometer box into which three electronics PCBs are embedded. The telescope images a $27m{\times}28km$ area of Earth surface onto a slit of dimensions $11.8{\mu}m{\times}12.1mm$. This corresponds to a ground sampling distance of 27 m and a swath width of 28 km for nadir looking posture at an altitude of 700 km. Then the optics relays and disperses the slit image onto the detector thereby producing a monochrome image of the entrance slit formed on each row of detector elements. The spectrum of each point in the row is imaged along a detector column. The optical mounts and housing structures are designed in order to prevent stray light from arriving onto the image and so deteriorating the signal to noise ratio (SNR). The stray light analysis, performed by a non-sequential ray tracing software (LightTools) with three dimensional housing and lens modeling, confirms that the ghost and stray light arriving at the detector plane has the relative intensity of ${\sim}10^{-5}$ and furthermore it locates outside the concerned image size i.e. the field of view of the optics.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.9
• /
• pp.69-75
• /
• 2014

Rock fall protection system installed against rock slope is one of the most conventional way to protect nearby infra structures. Despite of wide application of typical rectangular nets, virtually installed to protect rock slope face, several problems have also been pointed out up to date. Rectangular draped nets are vulnerable to a sudden external shock such as rock fall, because it doesn't have any systematical buffers or shock absorbers. Furthermore, it has been widely recognized from the some cases of rock fall accident in Korea that rock fall protection nets cause wide range of failure in the rock slope faces due to insufficient pullout bearing capacity of fixing parts. Therefore, in this study, we tried to make a consideration about the problems of existing standard rock fall protection nets in Korea, and develop a new type of hexagonal net with a shock absorber based on design rock fall energy. In this paper, laboratory and full scale test procedure is described to analysis the performance of newly developed hexagonal rock fall net, and the key results are presented and discussed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.93-99
• /
• 2017

The rate of traffic accidents that occurred in Korea last year is 10 out of every 100,000 people, ranking it 6th among the 35 OECD member countries. The accident rate of children with disabilities and elderly people is also high. The purpose of this study is to introduce traffic safety facilities which have been developed for the reduction of traffic accidents in non-urban areas in Korea through an analysis of the related literature, the accident factors using traffic accident analysis system data and traffic accident characteristics. Traffic safety integrated facilities for ICT-based pedestrian crossings are subject to cross-sectional coverage of child protection zones. The smart safety fence prevents vehicles from parking illegally and informs pedestrians that there is an access vehicle on the pedestrian crossing. The smart bump is designed to warn drivers who are not aware of the pedestrians. In order to standardize the appropriate form and size of the traffic safety facilities for pedestrian crossings, we constructed a standard model for each type, considering the road function, press classification, power, lane number, geometric form, etc. As a result, the rate of traffic accidents involving vulnerable people was reduced. In addition, it is anticipated that the maintenance costs will be reduced by the use of a solar power supply and their compatibility with the existing installed safety fences.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.729-737
• /
• 2014

A study has been carried out that effectively controls the vibration of asymmetric cable-stayed bridges caused by earthquakes with MR dampers. In order to enhance the practical serviceability of MR dampers, an asymmetric cable-stayed bridge structure has been designed and produced, and a MR damper has been produced so as to have this bridge structure controlled appropriately. An experiment that controls vertical and horizontal vibrations has been carried out by exciting the asymmetric cable-stayed bridge in the horizontal direction with the El-centro seismic wave. The control performance of the MR damper has been evaluated under the five control conditions in the experiments of vibration control in each direction. As a result of the experiment, MR dampers were proved to control vibrations more effectively when either Lyapunov control algorithm or Clipped-optimal control algorithm was used to control vibrations of the asymmetric cable-stayed bridge caused by earthquakes. In addition, different controlling effects were found in vibration controls in vertical and horizontal directions due to the asymmetry of the structure and the horizontal excitation. With such controlling effects, semi-active MR dampers are evaluated to effectively control vibrations caused by earthquakes in flexible and asymmetric structures such as asymmetric cable-stayed bridges.

• Journal of Energy Engineering
• /
• v.6 no.1
• /
• pp.104-113
• /
• 1997

This study aims to develop an analysis model using a commercial process simulator-ASPEN PLUS for an IGCC (Integrated Gasification Combined Cycle) system consisting a dry coal feeding, oxygen-blown entrained gasification process by Shell, a low temperature gas clean up process, a General Electric MS7001FA gas turbine, a three pressure, natural recirculation heat recovery steam generator, a regenerative, condensing steam turbine and a cryogenic air separation unit. The comparison between those results of this study and reference one done by other engineer at design conditions shows consistency which means the soundness of this model. The greater moisture contents in Illinois#6 coal causes decreasing gasifier temperature and the greater ash and sulfur content hurt system efficiency due to increased heat loss. As the results of sensitivity analysis using developed model for the parameters of gasifier operating pressure, steam/coal ratio and oxygen/coal ratio, the gasifier temperature increases while combustible gases (CO＋H2) decreases throughout the pressure going up. In the steam/coal ratio analysis, when the feeding steam increases the maximum combustible gas generation point moves to lower oxygen/coal ratio feeding condition. Finally, for the oxygen/coal ratio analysis, it shows oxygen/coal ratio 0.77 as a optimum operating condition at steam/coal feeding ratio 0.2.

• Korean Journal of Environmental Biology
• /
• v.38 no.1
• /
• pp.197-205
• /
• 2020

With the purpose of designing companion planting of groundcover plants for ornamental uses, this study identified the yearly growth characteristics of nine species of different life forms, analyzed the coverage characteristics of individual plants, and suggested combinations of plants suitable for each life form. Polygonatum odoratum var. pluriflorum, Liriope platyphylla and Hosta capitata, as short-grained plants that can grow to more than 20 cm, tended to grow for 60 days after planting in April and maintain their shape thereafter. Their aerial parts started to wither and enter dormancy after September. Saxifraga stolonifera, Dianthus chinensis and Sedum middendorffianum tended to continuously grow until September after planting in April and their growth declined after September. Lysimachia nummularia, as a creeping plant that grows creeping on the ground, started to show a rapid growth three months after planting. Sedum sarmentosum grew slowly until August and the aerial parts started to wither from September when the temperature decreases. The coverage characteristics of these nine species that grow differently after companion planting were surveyed and the growth of Sedum sarmentosum showed the highest number of companions. It was found that Hosta capitata can be companion planted with Sedum middendorffianum, Saxifraga stolonifera, and Lysimachia nummularia. These results indicate that among different shoot growth types species propagated with their stems creeping on the ground or those that can grow vegetatively with non-rhizome parts are more suitable for companion planting with others than those of which rhizomes branch.