• Korean Journal of Poultry Science
• /
• v.48 no.2
• /
• pp.91-100
• /
• 2021

The study determined the effects of stock density (SD) and energy level (EL) on growth performance, serum biochemistry, and meat quality in Korean native chickens. A total of 240 chickens were randomly assigned to one of the four treatments including two stock density (low, 14, and high, 16 chickens per m²) and two energy level (low, 2,950, 3,000, 3050 ME kcal/kg, and high 3,150, 3,200, 3,250 ME kcal/kg, for starter, grower, and finisher, respectively). During the whole period of the experiment, the chickens were fed ad libitum. The greater final body weight and weight gain were achieved in chickens fed high energy diet, whereas the final body weight and weight gain were significantly reduced in high-density treatment compared with the low density. Chickens in low-density groups had a higher feed intake compared with high-density treatment, however, the energy level did not affect the feed intake. An improved overall feed conversion ratio was detected in the high energy treatment. There was a significant interaction between stock density and energy level on cholesterol concentration. The concentration of aspartate transaminase in serum was increased by higher stock density. There was a significant treatment interaction on IgM levels. Moreover, the carcass rate was significantly increased in the high energy level treatment. Based on the findings, we suggest that rearing chickens in low density with high dietary energy levels could be beneficial by improving the growth performance.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.19-29
• /
• 2022

The result of a questionnaire survey conducted on fishermen using coastal fish traps shows that fall accidents during trap dropping and pulling constitute the highest proportion of accidents at 42.1 %, whereas slipping accidents on the deck or stricture accidents to the body due to the trap winding device constitute 21.1 % each. In addition, 53.2 % of all surveyed subjects responded that trap pulling is the most dangerous task, followed by fish sorting 33.8 %, and trap dropping 9.1 %. As for the main items requested by fishermen for improving the trap winding device, 36.8 % indicated a method to easily lift the trap from the water to the work deck, and 31.6 % indicated a method to overcome the rope tension and prevent slip when pulling the trap to reduce the accidents. The small trap fishing vessel winding device proposed herein can increase the winding force by strengthening the rope contact area and friction coefficient via an appropriate contact angle between the driving roller of the winding device and the rope. When the contact angles between the driving roller and the rope are 1°, 5°, 9°, 14° and 19°, the rope tension showed a difference according to each contact angle. When the contact angle is 9°, the rope tension is the highest at 392.62 kgf. Based on these experimental results, a prototype winding device is manufactured, and 25 traps are installed on a rope with a total length of 100 m at 4 m intervals in the sea, and then the rope tension is measured during trap pulling. As a result, the rope tension increases rapidly at the initial stage of trap pulling and shows the highest value of 31.89 kgf, which subsequently decreases significantly. Therefore, it is appropriate to design the winding force of a small trap fishing vessel winding device based on the maximum tension value of the rope specified at the beginning of the trap pulling operation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.5
• /
• pp.40-53
• /
• 2022

This study carried out to provide the methodology and basic status material of using Korean national statistics needed to find the actual state of the landscape architecture industry. The landscape architecture industry was classified into 'Design', 'Construction Management', 'construction', 'Maintenance & Management', 'Materials', 'Research', 'Education', and 'Administration' areas. In each field, business types were systemized and associated in accordance with Korean standard industrial classification and legislations pertinent to construction. Among them, the business types directly defined in the construction related legislations under the Ministry of Land, Infrastructure and Transport were focused on, and the establishment, association, integration, distribution, duplication, and omission of national statistics were analyzed. As a result, the business types of statistical analysis were selected. In order for commonality of statistical items and minimized error of interpretation, semantic analysis was conducted. Finally, the number of registered business types, the number of workers, and sales were selected. Based on them, the analysis framework applicable to fundamental analysis and evaluation of the actual state of the industry was proposed. Actual national statical data were applied for analysis and evaluation. In 2019, the number of registered business types related to the landscape architecture industry was 12,160, the number of workers by business type was 106,296, and the sales by business type were 8,308.5 billion KRW. The number of registered business types and the number of workers had been on the rise from 2017, whereas the sales had been on the decrease. It is required to come up with a plan for industrial development. This study was conducted with the national statistics established by multiple public institutions, so that there are limitations in securing consistency and reliability. Therefore, it is necessary to establish systematic and consistent national statistics in accordance with 「Landscaping Promotion Act」. In the future, it will planned to research application and development plans of national statistics according to subjects including park and green.

• Journal of Wetlands Research
• /
• v.25 no.2
• /
• pp.75-82
• /
• 2023

Data for measuring the flow rate of streams are used as important basic data for the development and maintenance of water resources, and many experts are conducting research to make more accurate measurements. Especially, in Korea, monsoon rains and heavy rains are concentrated in summer due to the nature of the climate, so floods occur frequently. Therefore, it is necessary to measure the flow rate most accurately during a flood to predict and prevent flooding. Thus, the U.S. Geological Survey (USGS) introduces 1, 2, 3 point method using a flow meter as one way to measure the average flow rate. However, it is difficult to calculate the average flow rate with the existing 1, 2, 3 point method alone.This paper proposes a new 1, 2, 3 point method formula, which is more accurate, utilizing one probabilistic entropy concept. This is considered to be a highly empirical study that can supplement the limitations of existing measurement methods. Data and Flume data were used in the number of holesman to demonstrate the utility of the proposed formula. As a result of the analysis, in the case of Flume Data, the existing USGS 1 point method compared to the measured value was 7.6% on average, 8.6% on the 2 point method, and 8.1% on the 3 point method. In the case of Coleman Data, the 1 point method showed an average error rate of 5%, the 2 point method 5.6% and the 3 point method 5.3%. On the other hand, the proposed formula using the concept of entropy reduced the error rate by about 60% compared to the existing method, with the Flume Data averaging 4.7% for the 1 point method, 5.7% for the 2 point method, and 5.2% for the 3 point method. In addition, Coleman Data showed an average error of 2.5% in the 1 point method, 3.1% in the 2 point method, and 2.8% in the 3 point method, reducing the error rate by about 50% compared to the existing method.This study can calculate the average flow rate more accurately than the existing 1, 2, 3 point method, which can be useful in many ways, including future river disaster management, design and administration.

• Korean Journal of Plant Resources
• /
• v.36 no.4
• /
• pp.369-380
• /
• 2023

Developing and breeding improved legume-based food resources require collecting useful genetic traits with heritability even though requiring some time-consuming, costly, and labor intensive. We attempted to infer heritability of nine genetic traits-days to flowering, days to maturity, period from flowering to maturity, the number of seeds per pod, 100-seeds weight, and four contents such as crude protein, crude oil, crude fiber, and dietary fiber-using 455 homologous chloroplast gene sets of six species of legumes. Correlation analysis between genetic trait differences and phylogenetic distance of homologous gene sets revealed that days to flowering, the number of seeds per pod, and crude oil content were influenced by genetic factors rather than environmental factors by 62.86%, 69.45%, 57.14% of correlated genes (P-value ≤ 0.05) and days to maturity showed intermediate genetic effects by 62.42% (P-value ≤ 0.1). The period from flowering to maturity and 100-seeds weight showed different results compared to those of some previous studies, which may be attributed to highly complicated internal (epistatic or additive gene effects) and external effects (cultural environment and human behaviors). Despite being slightly unexpected, our results and method can widely contribute to analyze heritability by including genetic information on mitochondria, nuclear genome, and single nucleotide polymorphisms.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.94-101
• /
• 2023

In this study, the development performance of the head bars, which is SD700, was experimentally evaluated at the RC (reinforced concrete) or SFRC (steel fiber reinforced concrete external beam-column joint. A total of 10 specimens were tested, and variables such as steel fibers, length of settlement, effective depth of the beam, and stirrups of the column were planned. As a result of the experiment, the specimens showed side-face blowout, concrete breakout, and shear failure depending on the experimental variables. In the RC series experiments with development length as a variable, it was confirmed that the development strength increased by 26.5~42.2% as the development length increased by 25-80%, which was not proportional to the development length. JD-based experiments with twice the effective depth of beams showed concrete breakout failure, reducing the maximum strength by 31.5% to 62% compared to the reference experiment. The S-series experiment, in which the spacing of the shear reinforcement around the enlarged head reinforcement was 1/2 times that of the reference experiment, increased the maximum strength by 8.4 to 9.7%. The concrete compressive strength of SFRC was evaluated to be 29.3% smaller than the concrete compressive strength of RC, but the development strength of SFRC specimens increased by 7.3% to 12.2%. Accordingly it was confirmed that the development performance of the head bar was greatly improved by reinforcing the steel fiber. Considering the results of 92% and 99% of the experimental maximum strength of the experiment arranged with 92% and 110% of the KDS-based settlement length, it is judged that the safety rate needs to be considered even more. In addition, it is required to present a design formula that considers the effective depth of the beam compared to the development length.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.152-161
• /
• 2023

In general, large-capacity hydrogen storage vessels, typically in the form of vertical cylindrical vessels, are constructed using steel materials. These vessels are anchored to foundation slabs that are specially designed to suit the environmental conditions. This anchoring method involves pre-installed anchors on top of the concrete foundation slab. However, it's important to note that such a design can result in concentrated stresses at the anchoring points when external forces, such as seismic events, are at play. This may lead to potential structural damage due to anchor and concrete damage. For this reason, in this study, it selected an vertical hydrogen storage vessel based on site observations and created a 3D finite element model. Artificial seismic motions made following the procedures specified in ICC-ES AC 156, as well as domestic recorded earthquakes with a magnitude greater than 5.0, were applied to analyze the structural behavior and performance of the target structures. Conducting experiments on a structure built to actual scale would be ideal, but due to practical constraints, it proved challenging to execute. Therefore, it opted for an analytical approach to assess the safety of the target structure. Regarding the structural response characteristics, the acceleration induced by seismic motion was observed to amplify by approximately ten times compared to the input seismic motions. Additionally, there was a tendency for a decrease in amplification as the response acceleration was transmitted to the point where the centre of gravity is located. For the vulnerable components, specifically the sub-system (support columns and anchorages), the stress levels were found to satisfy the allowable stress criteria. However, the concrete's tensile strength exhibited only about a 5% margin of safety compared to the allowable stress. This indicates the need for mitigation strategies in addressing these concerns. Based on the research findings presented in this paper, it is anticipated that predictable load information for the design of storage vessels required for future shaking table tests will be provided.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.6
• /
• pp.423-446
• /
• 2023

Shield TBM tunnel linings are segmented into segments and rings. This study investigates the response characteristics of the stress and displacement of the segment lining under seismic waves through modeling that considers the interface behavior between segments by applying a shell interface element to the contact surface between segments and rings. And there is no management criteria for ovaling deformation of segment linings in Korea. So, this study the ovality criteria and meaning of segment lining. The results of study showed that the distribution patterns of stress and displacement under seismic waves were similar between continuous linings and segment linings. However, the maximum values of stress and displacement showed differences from segment linings. The stress distribution of the continuous lining modeled as a shell type has a stress distribution that has continuity in the 3D cylindrical shape, but the segment lining is concentrated outside the segment, and the largest stress occurs at the location where the contact surface between the segment and the ring is concentrated. This intermittent and localized stress distribution shows an increasing as the ovality of the lining increases at seismic waves. The ovality at which the increase in stress distribution begins to show irregularity and localization is about 150‰. Ovality of 150‰ is an unrealistic value that cannot represent actual lining deformation. Therefore, the ovality of the segment lining increase with depth, but it does not have a significant impact on the stability caused by seismic load.

• Journal of Venture Innovation
• /
• v.7 no.1
• /
• pp.91-110
• /
• 2024

In this study, we compared and analyzed the influence of self-leadership on innovative behavior and the mediating effect of job satisfaction among R&D practitioners in manufacturing and information communication technology (ICT) industries. To accomplish this, we conducted an online survey using random sampling methods and collected data from 209 respondents. We employed exploratory factor analysis, reliability analysis, correlation analysis, multiple regression analysis, and mediation analysis using SPSS 20.0 software to analyze the data and to compare differences between the manufacturing and ICT sectors. The research findings are as follows: Firstly, both in manufacturing and ICT sectors, self-leadership showed significant positive correlations with job satisfaction and innovative behavior. Secondly, in the analysis of the impact of self-leadership on innovative behavior, in the manufacturing sector, only natural reward strategy and constructive thought strategy showed significant positive effects, while in the ICT sector, behavioral-oriented strategy, natural reward strategy, and constructive thought strategy all showed significant positive effects. Thirdly, in the analysis of the impact of self-leadership on job satisfaction, in the manufacturing sector, only natural reward strategy and constructive thought strategy showed significant positive effects, while in the ICT sector, behavioral-oriented strategy and natural reward strategy showed significant positive effects. Fourthly, in the analysis of the impact of job satisfaction on innovative behavior, significant positive effects were observed in both manufacturing and ICT sectors, with manufacturing sector having relatively greater impact than ICT sector. Lastly, the results of the analysis on the mediating effect of job satisfaction indicate that in the manufacturing sector, only a constructive thinking strategy significantly influences, showing partial mediating effects. However, in the ICT sector, no mediating effects of job satisfaction were observed for any sub-factors of self-leadership. These research findings highlight differences in the mechanisms of action of self-leadership on innovative behavior and its mediating effects between the manufacturing and ICT sectors. Furthermore, the results suggest the importance of improving organizational strategies and culture towards promoting leadership, job design, and job satisfaction, considering the characteristics of each industry and research and development organization.

• The Korean Journal of Archival Studies
• /
• no.79
• /
• pp.121-168
• /
• 2024

Record & archives management is at the heart of archival science. We must be faithful to record & archives management. However, isn't there a paradox that arises the more faithful we are to record & archives management? The paradox is that 'being a responsible manager and efficiently managing records' is rather reduces the interest in the social existence of humans who create and use such records. Why do humans produce and use records? It may be because human beings have been living with the concept of records. The concept is 'the same as the design of thoughts'. There is no need to doubt this direction because as record & archives management develops, more valuable records are preserved more systematically, and they are been served with wider scope and appropriateness. However, if we observe this situation from a human point of view rather than record & archives management, we find that humans appearing in record & archives management are limited to the object of using records. If humans are perceived differently based on the hypothesis of reviewing from the ground up, we can encounter a unique context about the relationship between humans and records or between records and humans. If it reaches the norm that human beings have dignity that cannot be transferred to anyone, have the right to pursue happiness, and must live by enjoying freedom, equality, and social basic rights, in short, if human beings are recognized from a constitutional point of view, we can newly recognize the social role and direction of records. The constitution and international human rights norms document basic human rights as the final norm and clarify that it is the duty of the state to guarantee and practice them. The social role of records from a constitutional point of view is the practice of records that proliferate basic human rights. The practice of archiving, which multiplies basic human rights, may also be a civic consciousness required of experts, but on the other hand, it can be a professional way for archival studies. If record management is a two-lane round trip, it can be said that the interaction between record management and record practice, which multiplies basic human rights, is a pioneering four-lane round trip. This article examines the practice of archiving, which has been developed in and out of record & archives management, by clearly grasping the constitutional perspective from the perspective of archival studies, and examines the social role of archival studies in this context. The social role of archival studies is to provide new linguistic rules for archiving.