• Journal of the Korean Geotechnical Society
• /
• v.29 no.12
• /
• pp.5-10
• /
• 2013

Bearing capacity of a drilled shaft can be separated into side resistance and base resistance. But in domestic design procedure side resistance is usually underestimated compared with base resistance. Results of bi-directional test showed that measured side resistances in each different layers are larger than those evaluated from several suggested methods. In this study, measured side resistances in each different layer of drilled shafts installed in domestic sites are analyzed and compared with evaluated side resistances from the method using revised SPT N value. For weathered rock and soft rock layer, from which rock core can hardly be obtained, we suggested new evaluated methods using revised SPT N value instead of the method using uniaxial compressive strength of rock. Resuts showed that the ranges of side resistance of cohesive and non-cohesive layer are $f_s{\leq}5tf/m^2$ and $f_s{\leq}15tf/m^2$ respectively. Range of side resistance in weathered rock is $15tf/m^2$ < $f_s{\leq}50tf/m^2$ and that in soft rock $f_s{\geq}35tf/m^2$.

• Composites Research
• /
• v.31 no.4
• /
• pp.139-144
• /
• 2018

Long Fiber-reinforced composites have advantages of excellent production efficiency and formability of complex shapes compared to conventional continuous fiber reinforced composite materials. However, if we need to make complicated composite shapes or to assemble parts made of different materials, a variety of joining methods are needed. In general, long fiber prepreg sheet (LFPS) contains mold release agent to facilitate demolding after thermoforming. Therefore, mechanical fastening is required in addition to the adhesive bonding to get proper joining strength. In this study, we proposed a stainless steel insert for co-cure bonding which cures LFPS and bonds the stainless steel insert through thermoforming process. The wing of the insert which is spread during the thermoforming process induces adhesion and mechanical wedging effect and serves as a hook to resist the pulling force. The burn-out method was used to confirm the unfolded state of the stainless steel insert wings inserted into the composite material. The static pull-out test was performed to quantitatively evaluate the joining strength. From these experimental results, the condition which guarantees the most appropriate joining strength was derived.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.5
• /
• pp.503-516
• /
• 2012

Rock mass rating (RMR) is the key factor when designing the appropriate support pattern of tunnel projects. Borehole drilling is usually performed along the tunnel route in order to determine the rock mass rating to be used for tunnel design. The rock mass rating at the non-boring region between boreholes is usually assessed through geophysical surveys such as electrical prospecting, seismic prospecting, etc. Many studies were carried out to find out the correlation between electrical resistivity and rock mass rating. However, most researches were aimed at obtaining the relationship between the two parameters utilizing experimental results obtained from laboratory tests or electrical prospectings. In this paper, efforts were made to analyze and obtain relationships between the electrical resistivity obtained from in-situ electrical resistivity logging data and the rock mass rating. Correlation studies using field data showed that the electrical resistivity is highly correlated with the rock mass rating with the determination coefficient more than 90%. The correlation analysis was also carried out between RMR classification parameters and the electrical resistivity. It was shown that the correlation between the condition of discontinuities and the electrical resistivity was very high with the determination coefficient more than 80%; that between the groundwater condition and the electrical resistivity was very low with the determination coefficient less than 57%.

• Korean Journal of Organic Agriculture
• /
• v.18 no.4
• /
• pp.599-612
• /
• 2010

This study was conducted to investigate the effect of organic feed containing rice bran and soybean hull as organic by-products on milk production of mid-lactation dairy goats. Four Saanen dairy goats (initial BW $59.4{\pm}7.4$ kg, average 6 lactation months, fourth kidding) were allocated into conventional feed group (T1) and organic feed group (T2) with 2${\times}$3 crossover design for 9 weeks. Experimental diets were formulated to contain 23 MJ ME/d, 382 g CP/d DM based on NRC (1981) and AFRC (1998). Dry matter (DM) intakes of concentrate and silage were higher in T2 (1,232 and 96 g/d) than T1 (1,105 and 91 g/d) (p<0.05). However, DM intake of hay was higher in T1 (488 g) than T2 (347 g) (p<0.05). Total DM intake had no significant difference between T1 and T2. Although no significant difference was found in milk yield between treatments, T2 numerically increased (+150 g/d) compared with T1. There were no significant differences in milk composition and milk urea nitrogen (MUN) between T1 and T2. Relative to T1, T2 significantly increased the stearic acid (C18:0) and linoleic acid (C18:2) (p<0.05). Overall results of the present experiment indicated that organic feed could not adversely affect DM intake and milk production in dairy goats compared with conventional feed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.7
• /
• pp.629-634
• /
• 2017

In the case of the UHP (Ultra high performance) tire that the demand has increased rapidly, compared with the commonly used tire, severe deformation has been observed because of the low aspect ratio. When repeated deformations are applied to the sidewall rubber, accumulated fatigue damage may cause fatigue failure. Thus, the evaluation of the durability of the tire sidewall rubber has become a very important issue to prevent accidents that occur while the vehicle is running. However, the research and design criteria for the durability performance of the tire sidewall rubber hardly exist. In this study, we suggest a lifetime prediction formula using strain energy density obtained by performing tensile tests and fatigue tests on two different kinds of the tire sidewall compounds. Additionally, the applicability of our findings for low fuel consumption tires was reviewed by converting the fatigue life of the sidewall rubber into the expected mileage of the tire.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.35 no.1
• /
• pp.43-49
• /
• 2015

This experiment was conducted to evaluate the agronomic characteristics and forage productivity of Italian ryegrass cultivars in Yecheon, Kyeongbuk from 2011 to 2013. The experimental design was a randomized complete block design (RCBD) with three replications. Italian ryegrass cultivars were seeded on Sep. 26 in 2011 and Sep. 25 in 2012. The Italian ryegrass cultivars were harvested on the heading date of the variety. The cold-resistance of domestic cultivars was stronger than other foreign varieties. Among early-maturing cultivars, the dry matter (DM) yield of the "Kowinearly" was 10,031 kg/ha, which was significantly higher than that of other cultivars (p<0.05). In medium-maturing cultivars, the DM yield of the "Kowinmaster" and "Tam 90" were 10,484 and 8,191 kg/ha, respectively. Of the two, the former's DM yield was higher than the latter's (p<0.05). Among late-maturing cultivars, the DM yield of "Hwasan 104" was 10,641 kg/ha, which was similar to that of "Hwasan 101" and significantly higher than the other late-maturing cultivars (p<0.05). According to the results obtained from this study, an early-maturing variety with cold-tolerance and high productivity is required for the paddy field cultivation of an Italian ryegrass cultivar after rice harvest in the mid-northern region of Korea. A medium- or late-maturing variety is more advantageous for the field cultivation of the maximum quantity that is possible. In conclusion, to select which variety/ies to grow, the climate of the growing area, weather conditions, and the cropping system must all be considered.

• Journal of the korean Society of Automotive Engineers
• /
• v.18 no.5
• /
• pp.53-68
• /
• 1996

마그네슘이 자동차 경량화에 관심이 되는 이유는 근본적으로 CAFE 규제와 같이 경량화를 통한 화석연료의 소모를 크게 억제해야 한다는 사회적인 규제이나, 지난 10여년간의 기술발전으로 내식성이 나쁘다거나 취급이 위험한 금속이라는 인식이 크게 개선된 데에도 있다. 다른 경량금속에 대한 Mg 지금 가격의 비교조건이 호전되었고 향후 원소 재공급의 다변화가 추진되고 있는 것도 환경을 변화시킨 중요한 요인이다. 그간 중요한 경량화 대체 재료로 연구투자가 많았던 유기고분자 재료 및 FRP 등과 같은 복합재료는 폐기부품의 재활용이 어려움 때문에 호나경친화적인 단점이 부각되어, 이 소재의 증가가 주춤해 있다. 마그네슘의 경우에는 재활용이 가능하고, 진동흡수효과가 매우 커서 소음발생을 크게 줄일 뿐만 아니라, 주행 및 내구성시험에서 치수안정성이 좋고 많은 종류의 전자기기 사용에 의한 전자파 차폐효과도 큰 장점을 가지고 있다. 본 고에서는 Mg 다이캐스팅으로 자동차부품의 경량화 현황과 선진국에서 보는 전망을 미국을 중심으로 정리하고, 이와 관련한 Mg 다이캐스팅으로 자동차부품의 경량화 현황과 선진국에서 보는 전망을 미국을 중심으로 정리하고, 이와 관련한 Mg 기술적인 이슈와 시장전망도 서술하였다. 그리고 현재 우리나라의 연구계와 부품업계에서 추진하고 있는 연구개발 동향을 자동차 업계에 소개하는 의미도 있다. 이처럼 우리나라의 현황을 정리해 보는 것은 국내 자동차 산업이 국제적인 경쟁을 하고 있고 Mg기술과 원료확보에서 일본의 견제를 받고 있는 우리의 현실에서도 필요한 작업으로 생각된다.값들로 구성되는 형상을 내구 성능, 성형성등을 고려하여 최종 형상으로 결정한다. 내구성능의 예측은 금속부품의 내구수명 예측에 널리 이용되고 있는 방법이 방진 고무부품의 경우에도 적용 가능한지를 검토하고, 방진 고무부품에도 일반적으로 적용될수 있는 내구수명 예측방안의 개발 가능성을 타진해 보았다. 본 연구의 목표는 시제품을 제작하기 이전에 설계된 부품에 대한 스프링 상수 및 내구특성을 체계적으로 규명하여 제품 시험의 횟수를 줄이고, 보다 정밀한 제품을 제작할 수 있도록 하기 위한 것이다.세포수는 초기 배반포기배에서 팽윤 배반포기배로 진행됨에 따라 두배에서 세배 정도 증가되었음을 알 수 있었다. 또한, differential labelling과 bisbenzimide기법에서 얻어진 각각의 총세포수를 비교하였을 때 총세포수는 발달의 진행 정도에 따라 증가되며 그와 동시에 동일한 군 간의 세포수도 거의 유사함을 알 수 있었다. 따라서, ICM과 TE를 differential labelling하는 기법은 수정란의 quality를 평가하는데 매우 유용한 기법으로서 착상전 embryo 발달을 연구하는데 효과적으로 이용될 수 있다는 것을 시사한다. 고도의 유의차를 나타낸 반면 비수구, 초생수로구 및 Bromegrass 목초구 간에는 아무런 유의차가 인정되지 않았다. 7. 농지보전 처리구인 배수구와 초생수로구는 비처리구에 비해 낮은 침두 유출량과 낮은 토양유실량을 나타내었다.구보다 14% 절감되는 것으로 나타났다.작용하는 것으로 사료된다.된다.정량 분석한 결과이다. 시편의 조성은 33.6 at%

• Journal of Animal Science and Technology
• /
• v.45 no.1
• /
• pp.123-130
• /
• 2003

Metabolizable energy requirements for maintenance (MEm) of Hanwoo bulls were estimated in twelves metabolism trials using three different feeds at four stages of body weight(100, 200, 300 and 400kg). Three feeds were composed of 1) concentrates and rice straw, 2) concentrates and mixed grass hay, 3) concentrates and corn silage, respectively. Three energy levels were 1) maintenance (M) requirement, 2) 1.5 ${\times}$ M, and 3) 2.0 ${\times}$ M. All bulls were received 60% of their energy from concentrates and 40% form roughages. Three cattle for each trials fed different energy level were housed in metabolism stalls during the 5days of collection period, a total collection of feces and urine. Thereafter, during the 2days of respiration period the heat production was measured by indirect calorimetry using respiratory chamber. MEm were 99.80, 94.48, 94.80, and 97.68 kcal/W0.75 at 100, 200, 300 and 400kg. Mean value of MEm and efficiency of utilization ME for retained energy(Kg) were 95.80 kcal/W0.75 and 0.44.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.110-110
• /
• 2016

금속재료 중 철강은 기계적 성질이 우수하고 대량생산에 의한 뛰어난 경제성을 가지기 때문에 다양한 산업 분야에서 널리 사용되고 있다. 그러나 스테인리스강 등과 같은 일부 특수한 용도의 강을 제외하고는 부식 환경에 취약하기 때문에 그 용도에 따라 표면처리를 함으로서 내식특성을 부여하고 있다. 일반적으로 이러한 철강재료에 대한 부식문제를 해결하기 위한 방법으로는 습식프로세스 중 아연(Zn)도금이 사용되는데, 아연은 그 자체가 보유하고 있는 차폐(barrier)효과는 물론 상대적으로 이온화 경향이 크기 때문에 철에 대하여 전자를 공급하는 희생양극적(Sacrificial anode)역할을 하여 철을 방식하는 원리를 가지고 있다. 하지만 최근에 이르러 기존의 도금 프로세스 처리된 제품의 사용 및 적용분야가 확대되고 가혹해 짐에 따라서 내식성 향상을 위한 새로운 재료 및 신기술 개발이 요구되고 있는 실정이다. 본 연구에서는 친환경 프로세스 방법인 PVD법 중 하나인 스퍼터링(Sputtering)을 이용하여 0.8mm 두께의 냉연강판 (cold rolled steel) 상에 Al에 대한 Mg 함량을 10~30wt.%로 하여 약 $5{\mu}m$ 두께의 막을 제작하였다. 이때 20wt.% 막의 경우 공정압력조건을 증가시켜 증착 막의 결정배향성을 변화시켰다. 뿐만 아니라 제작된 막들에 대해서 $400^{\circ}C$온도에서 10분간 열처리함으로서 코팅막의 성분변화에 따른 영향을 살펴보기 위해 시편을 추가 제작하였다. 이와 같이 제작된 막들에 대한 형성메커니즘과 내식성의 상관관계 해명을 위해 막의 조성분포, 표면 및 단면의 모폴로지 관찰 및 결정구조 등 재료특성분석과 더불어 염수분무(Salt spray test), 침지시험 그리고 양극분극 시험 등을 통해 내식성 평가를 진행하였다. 이상의 종합적인 결과를 살펴보면 제작된 Al-Mg 막은 마그네슘 함량비 및 열처리 조건에 따라 조성분포와 막의 모폴로지 및 결정배향성이 변화한다는 것을 알 수 있었는데, 마그네슘 함량이 증가하고 열처리한 막의 내식성이 가장 양호한 것으로 나타났다. 이것은 Al-Mg 성분이 표면을 중심으로 균일 분산-분포하며, Al에 대한 Mg의 고용으로 인해 안정적으로 형성된 부식생성물과 금속화합물의 단계적 반응 효과에 의해 차폐효과와 희생양극적 특성이 동시에 향상되었기 때문으로 생각된다. 한편 공정 압력을 증가시켜 형성한 막은 결정학적 구조에서 보다 높은 표면 에너지와 증가한 격자 정수에 의해 Mg이 부식환경에서 빠르게 반응하여 안정적 피막을 형성하기 때문에 내식성이 향상된 것으로 보여 진다. 이상의 연구를 통해서 고내식성을 Al-Mg막의 유효성 확인하였으며, 설계에 대한 기초적인 응용지침을 제시할 수 있을 것으로 사료된다.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.6
• /
• pp.93-100
• /
• 2014

The objective of this study is to propose the measurement system implementation method for the evaluation and measurement of the indoor-impulsive over 170 dB noise source. For the purpose of measuring impulse noise, design and implementation constructed followed subsystems of the testing center, microphone, ear simulator, head and torso simulator and so on. Measurement systems for the accuracy and reliability of impulse noise are implemented when measuring 3 ways of measurements method by the simultaneous measurement system design. For the accuracy and reliability of three mutually indoor-impulse noise measurements were compared, three kinds of measuring methods in accordance with the peak sound pressure level and octave band. Comparing the results of data, the indoor-impulse noise by analyzing a frequency characteristic was validated in difference for the statistical significance. Result are determined by the influence of the reflected wave. Therefore, the flexible size of the interior test site while interior impulse noise measurement system was constructed. Throughout this system can be affected by parameters that are the impulse noise source and the corresponding frequency-characteristic analysis to determine the spectrum of the reflected wave. And, in the near future, indoor impulse noise measurement systems for acquisition and analysis are utilized in useful data.