• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.53-56
• /
• 2005

Hybrid rocket had many advantage with compared to solid and liquid rockets. In this study, swirl flow hybrid motor was designed and manufactured. And the methods of regression rate improvement wire considered. Thrust was calculated with pressure of the combustion chamber and the regression rate was measured in low flow rate of oxidizer. Several problems and solutions of operating hybrid rocket was presented.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.311-317
• /
• 2005

Hybrid rocket had many advantage with compared to solid and liquid rockets. In this study, swirl flow hybrid motor was designed and manufactured. And the methods of regression rate improvement were considered. Thrust was calculated with pressure of the combustion chamber and the regression rate was measured in low flow rate of oxidizer. Several problems and solutions of operating hybrid rocket was presented.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.11
• /
• pp.103-109
• /
• 2012

Samsung Thales has developed a small-sized autonomous underwater vehicle "BOTO" verified by a mathematical model simulation. The hydrodynamic coefficients and drag force were experimented at circulating water channel for validating cruising performance of the AUV. Based on the mathematical model, we simulated turning radius and way-point tracking on horizontal plane using way-point tracking algorithm. In this paper we introduce the vehicle system and the sea trial test results will be shown.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.12 no.4
• /
• pp.209-215
• /
• 1979

The manoeuvrabilities of a ship are decided by the values of her manoeuvring indices. The manoeuvring indices consist of two kinds: indices K and T. The former decides a ship's turning ability and the latter, the length of time delay to a steady turning motion after her rudder has finished the turn of an ordered angle. In this paper, the author figured out the values of the manoeuvring indices of the m. s. 'SAEBADA' (GT: 2,275,7 ton), the training ship of tile National Fisheries University of Busan through her Z test and analyzed these values and the other data which were obtained from her Z test to study her manoeuvrabilities. The results of]tamed are summarized as follows: 1. The manoeuvring indices K' of the m. s. 'SAEBADA' were $1.052(at\;10{\circ}\;Z\;test)\;0.925(at\;20{\circ}\;Z\;test)\;and\;0.877(at\;30{\circ}\;Z\;test)$. Her manoeuvring indices $0.815(at\;10{\circ}\;Z\;test)\;0.502(at\;20{\circ}\;Z\;test)\;and\;0.441(at\;30{\circ}\;Z\;test)$. Her above calculated values K', T' showed that her obeying ability to the turn of her rudder was more increased when her rudder was used to large angle than to small angle, but on the other hand in this case her turning ability was slightly reduced. 2. As it appeared that the calculated K'-values of the m.s. 'SAEBADA' were slightly smaller than the standard K'-values of the fishing boats similar in length, and her overshoot angles at her Z test were greater than other general ships, her turning ability was found to t]e slightly lower. 3. When the m. s. 'SAEBADA' took a turn at her $10^{\circ}\;Z$ test, running distance was about 8.6 times her own length and didn't exceed the standard manoeuvrability distance, 5 to 11 times general ships' own length, therefore she was considered to have a good manoeuvrability synthetically.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.8
• /
• pp.111-121
• /
• 2005

A 100kW class gas turbine combustor was developed and tested for PPU(Primary Power Unit) of ground vehicle. The combustor which employed annular-reverse type and pressure swirl atomizer was designed through 1-D analysis, 3-D thermal flow analysis and combustor performance was experimentally investigated on the combustor test rig. The test result was satisfactory. The developed combustor was also tested for environmental and endurance specification under engine adopted conditions and the application of a state-of-the-art gas turbine combustor to ground vehicle PPU turned out to be successful.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2016.05a
• /
• pp.75-77
• /
• 2016

IMO는 해상에서의 선박 안전 향상을 위해 선박의 복원성능과 조종성능에 관한 국제적 기준을 제시하고 있다. 이러한 기준은 선박 연구자가 수행하는 연구의 방향에도 영향을 미치고 있다. 기존의 수행된 연구는 복원성능과 조종성능의 각각의 분야에서 독립적으로 수행되어 왔으며, 아직 두 분야의 상호 관계에 관한 연구는 미비한 실정이다. 이에 본 논문에서는 선박의 복원성능과 조종성능의 상호 관계를 정량적으로 규명하고자 기초적인 실험 연구를 수행하였다. 이를 위해 복원성능을 나타내는 지표인 GM과 선박의 조종성능을 나타내는 지표인 선회성능을 통해 두 항복 간 상호 관계의 정량적 분석을 시도하였다. 자유항주 모형선을 이용한 선회 시험을 실시하였고, 그 결과 GM 감소에 따른 선회반경 감소 및 초기 횡경사 각도 증가를 확인했으며, 그 변화의 경향은 서로 다르게 나타나는 것을 확인하였다.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.834-839
• /
• 2003

In the present study, the performance characteristics and the number of stall cells during rotating stall of a centrifugal air compressor were experimentally investigated. If the flow coefficient is lower than 0.150, the static pressure at impeller inlet is higher than that at inlet duct And reverse flow is observed under these flow coefficient region. Maximum adiabatic efficiency is obtained for the tested compressor around flow coefficient 0.128, and it is independent of compressor rotating speed. The number of stall cells and their rotational speeds are distinctive features of the rotating stall phenomenon. The present study is mainly concerned with the number of stall cells and their rotational speeds. The interpretation method of visualization is based on the pressure distribution in the circumference pressure fields while plotting the pressure and its harmonics variations in time in polar coordinates.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.54-58
• /
• 2015

인간이 생활하는데 필요한 전기를 생산하는 시설 중 하나인 화력발전소의 발전수차를 냉각시키기 위하여 많은 양의 냉각수를 바다에서 취수하게 되는데, 이 과정 중에서도 특히 흡입수조(Intake Basin)에서 흡입펌프(Suction Pump)를 통과하는 단계가 매우 중요하다. 흡입수조의 형상과 펌프운용조건 등에 의하여 흡입구(Bell Mouth)에 접근하는 유동이 비대칭일 경우 흡입구 주변에서 선회류가 발생하거나 유속분포가 비균일?비대칭이 되기 쉽다. 그러면 선회류가 더욱 악화되어 볼텍스(Vortex)로 발달되면 취수 펌프에 악영향을 준다. 또한 볼텍스의 발생은 흡입수조의 형상뿐만이 아니라 낮은 수위일 경우 수면과 흡입구의 거리가 짧아지면서 자유수면볼텍스 또는 수중볼텍스가 발생할 확률이 높아지게 된다. 본 연구에서 수리모형시험을 통하여 펌프 조합 및 수위 변화에 따른 볼텍스의 발생여부를 파악하고 볼텍스 저감장치를 고안하였다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.1
• /
• pp.48-54
• /
• 2017

A minimum turning circle test of vehicles is operated by using Real-Time Kinematic(RTK) surveying method which enhances the precision of the Global Positioning System(GPS). A procedure of the conventional method to obtain results is to take post processing after the test. Therefore, it is difficult to ensure results in an instant. This paper introduces developed process and equipment that can immediately obtain results after the minimum turning test without post processing.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.05a
• /
• pp.33-35
• /
• 2019

해상구조물은 그 특성상 해상에서 고립되어 있고, 액체상태 또는 가스 상태의 탄화수소 등을 다루고 있어 사고발생시 대형사고로 이어질 가능성이 크다. 이에 해상구조물에는 유엔해양법협약에 따라 500m라는 넓이의 안전수역이 설정되어 있으며 추가로 설정되는 제한 수역은 명확한 근거 없이 상이한 넓이로 설정되어 있다. 이에 본 연구에서는 선박의 조종성능 및 해상구조물에서 다루는 화물의 고유한 위험특성을 파악하여 표준화된 안전수역을 설정하는 방안을 제시하고자 한다. 이에는 국제해사기구의 조종성능기준인 선회경의 크기제한, 초기선회성능, 정지성능 등이 있다. 본 연구는 정량화된 안전수역 및 제한수역 설정 등에 대한 기준을 제시하는 데 도움을 줄 수 있을 것으로 사료된다.