• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.2
• /
• pp.115-124
• /
• 2001

In this paper, authors propose a new nonlinear rotor flux observer for rotor field oriented control of an induction motor which is designed based on the extended Luenberger Observer theory. Extended Luenberger Observer requires minimal solution of nonlinear partial differential equation on its coordinate transformation and linearization needed on a nonlinear observer design in general. The proposed rotor flux observer is derived from the 2 phase model of induction motor on the orthogonal coordination and it has the reduce gain matrix. Simulation and experimentation were performed under the conventional indirect vector control and direct vector control with the proposed observer at different rotor resistance. Simulation results show that the convergence of the proposed observer is influenced by the chosen eigenvalues. Experimentation results on load operation show the direct vector control with the proposed observer is better than the indirect vector control to maintain the characteristics of the vector control.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.2
• /
• pp.169-187
• /
• 2008

Performance-based approaches as an alternative method of the existing force-based approach have gradually become recognized tools for the seismic design and evaluation. The maximum inelastic displacement response using capacity spectrum method (CSM) with elastic response spectrum is estimated from seismic response of equivalent linear system converted from nonlinear system. The purpose of this paper is to evaluate accuracy of capacity spectrum method using the equivalent SDOF methods of 4 types and the equivalent damping methods of 5 types for RC wall structure. In order to evaluate accuracy of capacity spectrum analysis, the shaking table test results for RC wall structures are compared with those by the capacity spectrum analysis. Also, the effect of bilinear capacity curves by two bilinear approximation methods for capacity spectrum analysis is compared.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.246-254
• /
• 2020

In this paper, we propose a learning based compressive sensing algorithm for the purpose of side scan sonar image denoising. The proposed method is based on Iterative Shrinkage and Thresholding Algorithm (ISTA) framework and incorporates a powerful strategy that reinforces the non-linearity of deep learning network for improved performance. The proposed method consists of three essential modules. The first module consists of a non-linear transform for input and initialization while the second module contains the ISTA block that maps the input features to sparse space and performs inverse transform. The third module is to transform from non-linear feature space to pixel space. Superiority in noise removal and memory efficiency of the proposed method is verified through various experiments.

• Electric Engineers Magazine
• /
• v.216 no.8
• /
• pp.28-33
• /
• 2000

최근 power electronics 응용 기기의 사용증가로 비선형 특성부하에 의한 고조파가 상당히 발생하고 있으며 고조파에 의한 영향이 심각한 수준에 이르고 있다. 빌딩의 인텔리전트화에 의한 OA기기 및 자동화에 따른 다량의 고조파가 변압기 과열, 중성선과열, 소음, 진동, Noise 등의 현상으로 나타나고 있으며 공장의 전력변환장치 사용증가에 따라 지금까지 고려되지 않았던 여러 가지 현상이 나타나고 있다.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.144-146
• /
• 1998

In this study Dead time equivalent resistance of Voltage source power converter is very important in current controller design. And Non-linear Modeling method can be applied in Power converter analysis. Using Describing Function method and Non-linear Resistance Modeling. Voltage Source Power Converter Bode diagram and Current controller analysis method are more reality.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.2
• /
• pp.209-220
• /
• 2000

For non-linear analysis of stiffened shell structures, the total Lagrangian formulation is presented based upon the degenerated shell element. Geometrically correct formulation is developed by updating the direction of normal vectors and taking into account second order rotational terms in the incremental displacement field. Assumed strain concept is adopted in order to overcome shear locking phenomena and to eliminate spurious zero energy mode. The post-buckling behaviors of stiffened shell structures are traced by modeling the stiffener as a shell element and considering general transformation between the main structure and the stiffener at the connection node. Numerical examples to demonstrate the accuracy and the effectiveness of the proposed shell element are presented and compared with references' results.

• Computational Structural Engineering
• /
• v.10 no.2
• /
• pp.149-160
• /
• 1997

Mechanical structures are composed of substructures connected by joints and boundary elements. While the finite element representation of plain substructures is well developed and reliable, joints have a lot of uncertainties in being accurately modelled and affect dynamic behavior of a total system. In order to improve the accuracy of a finite element model, a new method is proposed, in which reduced finite element model is combined with a system identification technique. After substructures except joints are modelled with finite element method and joint properties are represented by parameter states, non-linear state equation is derived in which parameter states are multiplied by physical states such as displacements and velocities. So the joint parameter identification is transformed into non-linear state estimation problem. The methods are tested and discussed numerically and the feasibility for physical application has been demonstrated through two example structures.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.5
• /
• pp.375-382
• /
• 2016

In this paper, we presents a signatures verification by using the nonlinear quantization histogram of polar coordinate based on multi-dimensional adjacent pixel intensity difference. The multi-dimensional adjacent pixel intensity difference is calculated from an intensity difference between a pair of pixels in a horizontal, vertical, diagonal, and opposite diagonal directions centering around the reference pixel. The polar coordinate is converted from the rectangular coordinate by making a pair of horizontal and vertical difference, and diagonal and opposite diagonal difference, respectively. The nonlinear quantization histogram is also calculated from nonuniformly quantizing the polar coordinate value by using the Lloyd algorithm, which is the recursive method. The polar coordinate histogram of 4-directional intensity difference is applied not only for more considering the corelation between pixels but also for reducing the calculation load by decreasing the number of histogram. The nonlinear quantization is also applied not only to still more reflect an attribute of intensity variations between pixels but also to obtain the low level histogram. The proposed method has been applied to verified 90(3 persons * 30 signatures/person) images of 256*256 pixels based on a matching measures of city-block, Euclidean, ordinal value, and normalized cross-correlation coefficient. The experimental results show that the proposed method has a superior to the linear quantization histogram, and Euclidean distance is also the optimal matching measure.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1993.04a
• /
• pp.219-224
• /
• 1993

본 연구는 철근콘크리트 격납구조물에서 가상의 냉각제 유출사고에 의한 온도하중과 압력에 따른 거동을 알아보기 위한 비선형 해석을 수행하였다. 시간에 따른 온도하중을 결정하기 위하여 과도온도해석을 통해 격납구조물 단면내의 온도분포를 구하였다. 구조물은 기하학적 비선형성과 재료비선형성을 고려한 판 및 쉘요소로 이상화되며, 쉘요소는 두께방향에 따라 변하는 응력을 고려하기 위해 몇 개의 층으로 이루어진 모델을 사용하였다. 열응력은 인접한 두시간 단계에서의 온도차를 하나의 하중증가로 고려하여 초기변형 문제로 변환하여 결정되었다. 본연구에서의 수치실험에 의하여 과도온도해석에 근거한 비선형온도경사를 고려할 때의 변위가 고려하지 않을 때의 변위에 비해 크게 나타남을 알 수 있다.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.336-339
• /
• 2001

본 논문에서는 $\alpha-\beta-0$ 변환 방식을 이용한 제어방식을 모델화 하여 DSTATCOM에 적용하였다. 이러한 변환 방식을 통해서 배전 선로상에 존재하는 역상성분, 영상성분 고조파 성분 등을 나타낼 수 있으며 이에 대한 적절한 보상신호를 연산과정을 통해 생성해 낼 수 있다. 제안된 제어기의 검증을 위해 EMTDC/PSCAD를 이용한 IEEE 13 버스 배전 계통 모델링 및 유도기 부하 모델링 및 사고 모의 및 보상 시뮬레이션을 실시하였다.