• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.77-79
• /
• 2008

본 논문에서는 고리모양 판의 멀티모드를 이용하여 동작하는 선형 초음파모터에 대한 해석방범을 제시하였다. 고정자의 변위는 3D 유한요소법을 이용하여 해석하였으며, 시간에 따른 접촉 면적과 접촉표면의 운동속도의 변화를 반영한 해석적 방법을 이용하여 고정자와 이동자 사이의 접촉을 해석하였다. 해석방법 검증을 위하여 외경 10.00mm, 두께 1.00mm인 선형 초음파모터 모델에 대한 해석결과를 실험결과와 비교하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.193-200
• /
• 2021

In this study, an analysis technique using static condensation is proposed for an efficient local nonlinear static analysis. The static condensation method is a model reduction method based on the degrees of freedom, and the analysis model is divided into a target part and a condensed part to be omitted. In this study, the nonlinear and linear parts were designated to the target and the omitted parts, respectively, and both the stiffness matrix and load vector corresponding to the linear part were condensed into the nonlinear part. After model condensation, the reduced model comprising the stiffness matrix and the load vector for the nonlinear part is constructed, and only this reduced model was updated through the Newton-Raphson iteration for an efficient nonlinear analysis. Finally, the efficiency and reliability of the proposed analysis technique were presented by applying it to various numerical examples.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.544-547
• /
• 2009

본 연구는 자기부상력의 선형 및 비선형효과가 이동중인 자기부상열차의 부상공극에 미치는 영향을 파악하는데 목적이 있다. 이를 위하여 자기공극의 피드백을 포함한 1자유도 차량에 대한 운동방정식을 구성하고, 최적능동제어기법을 적용하여 수치해석을 수행하였다. 해석결과 차량의 속도가 증가함에 따라 자기부상력의 선형 및 비선형효과가 자기부상차량의 부상공극에 미치는 영향에 뚜렷한 차이가 발생함을 알 수 있다. 결국 자기부상열차의 정확한 해석을 위해서는 자기부상력의 비선형효과를 고려한 해석이 필요할 것으로 판단된다.

• Journal of the Korea Concrete Institute
• /
• v.23 no.2
• /
• pp.177-184
• /
• 2011

This paper describes an analytical study on the design approach of PC system with continuous connections at member ends. In multi-ribbed moment resisting slab (MRS) system, double tee members are connected continuously over inverted tee beams with the continuous reinforcements placed within topping concrete. Thus, negative moments are concentrated within the narrow connection area. In order to propose a design method, experimental results of the companion study were examined using detailed nonlinear analysis. Then nonlinear static analysis was used to evaluate the partial continuity effect and the moment redistribution mechanism. Material and cross sectional properties were obtained from experimental results of the companion study. Plastic hinge properties for nonlinear static analysis were modeled with cracking moment, nominal moment, corresponding member deformations, etc. The analysis results showed that a large amount of negative moment of MRS slab can be reduced by applying partial continuity and moment redistribution in MRS joint.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4A
• /
• pp.281-290
• /
• 2009

In this study, an analysis technique of hybrid girder considering nonlinearity of steel-concrete contact surface is presented. Steel-concrete hybrid girder shows partial-interaction behavior due to the deformation of shear connectors, slip and detachment at the interface, and cracks under the applied loads. Therefore, the partial-interaction approach becomes more reasonable. Contact surface is modeled by interface element and analyzed nonlinearly because of cost of time and effort to detailed model and analysis. Steel and Concrete are modeled considering non-linearity of materials. Material property of contact surface is obtained from push-out test and input to interface element. For the constitutive models, Drucker-Prager and smeared cracking model are used for concrete in compression and tension, respectively, and a von-Mises model is used for steel. This analysis technique is verified by comparing it with test results. Using verified analysis technique, various analyses are performed with different parameters such as nonlinear material property of interface element and prestress. The results are compared with linear analysis result and analysis result with the assumption of full-interaction.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.5
• /
• pp.335-344
• /
• 2011

A curvilinear non-hydrostatic free surface model is developed to investigate nonlinear wave interactions in a circular channel. The proposed model solves the unsteady Navier-Stokes equations in a three-dimensional domain with a pressure correction method, which is one of fractional step methods. A hybrid staggered-grid layout in the vertical direction is implemented, which renders relatively simple resulting pressure equation as well as free surface closure. Numerical accuracy with respect to wave nonlinearity is tested against the fifth-order Stokes solution in a two-dimensional numerical wave tank. Numerical applications center on the evolution of nonlinear waves including diffraction and reflection affected by the curvature of side wall in a circular channel comparing with linear waves. Except for a highly nonlinear bichrmatic wave, the model's results are in good agreement with superimposed analytical solution that neglects nonlinear effects. Through the numerical simulation of the highly nonlinear bichramatic wave, the model shows its capability to investigate the evolution of nonlinear wave groups in a circular channel.

• Journal of Navigation and Port Research
• /
• v.30 no.8 s.114
• /
• pp.631-636
• /
• 2006

In this paper, the wave pattern around the hull with the transom stern advancing on the free surface with a constant speed was taken into consideration. To solve the problem the numerical analysis program was developed using Rankine source panel method based on potential flow analysis technique. The non-linearity of the free surface boundary conditions was fully satisfied. To verify the validity of the developed program the numerical calculations for Athena hull and KCS(KRISO container ship) hull was performed. The results of the numerical computation was compared with the ones of the model test experiment.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.3
• /
• pp.87-93
• /
• 2008

The large scale shaker can be employed to measure linear and nonlinear shear moduli of soils in situ as a function of shear strain. The method involves applying dynamic loads on a surface foundation measuring the dynamic response of the soil mass beneath the foundation with embedded instrumentation. This paper focuses on the development of a framework of the inverse analysis for the interpretation of test data to estimate linear and nonlinear shear moduli of soils along with the necessity of the inverse analysis. The suggested framework is based on the nonlinear least squares but it uses two iterative loops to account for the nonlinear behavior of soil that sensors are not located. The validity of the suggested inversion framework is tested through a series of numerical parametric studies. An example use of the suggested inversion framework is also shown. Because the field condition may affect the accuracy of suggested method, it is important to conduct a preliminary inverse analysis to quantify the discrepancy between the estimated modulus and the baseline.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.253-256
• /
• 2011

본 논문에서는 표면효과와 비선형 탄성효과를 고려한 FCC 나노박막의 순차적 멀티스케일 해석 모델을 제시한다. 표면에서의 구성방정식은 표면응력과 표면탄성계수를 이용하여 선형으로 표시되며, 표면효과를 나타내기 위한 표면물성들은 EAM 포텐셜을 이용한 원자적 계산 방법으로 계산된다. 두께가 얇은 나노박막은 표면응력으로 인하여 면내 방향으로 수축 또는 인장의 변형이 발생하게 된다. 나노박막의 평형상태에서의 변형율은 두께가 얇은 박막의 경우 재료가 선형 탄성 영역을 벗어나는 값을 가지는 경우가 많으므로 나노박막의 해석시 벌크 영역의 비선형 탄성 효과를 고려해야 한다. 이러한 비선형 탄성 효과를 고려하기 위해 본 연구에서는 FCC 구조를 가지는 금속의 비선형 탄성 모델을 제시하고, EAM 포텐셜로 계산된 응력과 탄성 계수를 이용하여 매칭 기법을 통하여 비선형 탄성 모델의 계수들을 결정한다. 또한 Cauchy-Born Rule 모델과 분자동역학 전산모사를 통하여 본 연구에서 제안된 비선형 탄성 모델에 대한 검증을 수행한다.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.5
• /
• pp.101-107
• /
• 1998

본 논문은 비선형 스트럿-타이 모델에 의한 프리스트레스트 콘크리트 정착부의 거동해석 및 설계에 관한 연구이다. 프리스트레스트 콘크리트 구조물의 정착부는 긴장재의 인장력 도입으로 인해 비교적 작은 단면에 큰 집중하중으로 발생하는 매우 중요한 구조부위이며, 기존의설계가 비교적 다른 구조부위의설계에 비하여 경험적으로 이루어지고 있을 뿐 만 아니라 해석에도 많은 시간과 계산량이 소요되는 단점이 있다. 비선형 스트럿-타이 모델을 대상 정착부의 비선형 재료거동을 따르도록 비선형 해석을 실시하여 설계를 수행하고 구조물의 극한하중을 추정하는 방법이다. 본 논문에서는 긴장력이 정착부의 중앙에 도입되는 경우, 편심으로 도입되는 경우, 다중 정착구가 존재하는 경우에 대하여 선형과 비선형 스트럿-타이 모델을 구성하여 정착부의 역학적 거동을 고찰하였고 실험결과와 비교하였다. 비교로부터 비선형 모델을 사용한 경우 선형 모델을 사용한 경우보다 안정성을 유지하면서 경제적인 설계가 가능하고 추정극학강도도 실험결과에 더욱 근접함을 알았다.