• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.12
• /
• pp.70-78
• /
• 2000

A novel capacitance deviation-to-time interval converter based on ramp-integration is presented. It consists of two current mirrors, two schmitt triggers, and control digital circuits by the upper and lower sides, symmetrically. Total circuit has been with discrete components. The results show that the proposed converter has a linearity error of less than 1% at the time interval(pulse width) over a capacitance deviation from 295 pF to 375 pF. A capacitance deviation of 40pF and time interval of 0.2 ms was measured for sensor capacitance of 335 pF. Therefore, the high-resolution can be known by counting the fast and stable clock pulses gated into a counter for time interval. The application of a novel capacitance deviation-to time interval converter to a digital humidity controller is also presented. The presented circuit is insensitive to the capacitance difference in disregard of voltage source or temperature deviation. Besides the accuracy, it features the small MOS device count integrable onto a small chip area. The circuit is thus particularly suitable for the on-chip interface.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.2
• /
• pp.151-157
• /
• 2013

This paper proposes an online adaptive fuzzy controller for a wind energy conversion system (WECS) that is intrinsically highly nonlinear plant. In real application, to obtain exact system parameters such as power coefficient, many measuring instruments and off-line implementations are required, which is very difficult to perform. This shortcoming can be avoided by introducing fuzzy system in the controller design in this paper. The proposed adaptive fuzzy control scheme using self-structuring algorithm requires no system parameters to meet control objectives. Even the structure of the fuzzy system is automatically grows on-line, which distinguishes our proposed algorithm over the previously proposed fuzzy control schemes. Combining derivative estimator for wind velocity, the whole closed-loop system is shown to be stable in the sense of Lyapunov.

• Journal of the Korean Geographical Society
• /
• v.40 no.3 s.108
• /
• pp.335-352
• /
• 2005

The question of whether fan type surface developed at the foot of mountains is pediment or alluvial fan has been discussed consistently through the Korean geomorphic history. Unfortunately the term, 'alluvial fan' was scarcely used, also even the existence of alluvial fan has been denied throughly for a long time in Korea. The negation of alluvial fan brought some difficulties in the development of the related Geomorphology. In order to resolve such a problem, more logical and exquisite theory by examination of geomorphic process must be systematically presented on the basis of overall problem recognition. The objective of this study is to represent the theoretical indicator based on the investigation of the points at issue that the existence of alluvial fan in Korea was denied. Moreover, we selected 13 alluvial fans in southern part of Korean Peninsula to compare with the worldwide alluvial fans according to theoretical indicator, and analysed their geomorphic distributional characteristics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.1
• /
• pp.7-12
• /
• 2003

The purpose of testability analysis is to estimate the difficulty of testing a stuck-at fault in logic circuits. A good testability measurement can give an early warning about the testing problem so as to provide guidance in improving the testability of a circuit. There have been researches attempting to efficiently compute the testability analysis. Conventional testability measurements, such as COP and SCOAP, can calculate the testability value of a stuck-at fault efficiently in a tree-structured circuit but may be very inaccurate for a general circuit. The inaccuracy is due to the ignorance of signal correlations for making the testability analysis linear to a circuit size. This paper proposes an efficient method for computing testability analysis, which takes into account signal correlation to obtain more accurate testability. The proposed method includes the algorithm for identifying all reconvergent fanouts in a given n circuit and the gates reachable from them, by which information related to signal correlation is gathered.

• The KIPS Transactions:PartB
• /
• v.13B no.5 s.108
• /
• pp.525-532
• /
• 2006

This paper proposes a new class of image restoration on the Ising modeled binary 'Takbon' image by the flexible line-fitting ICM(Iterated conditional modes) method. Basically 'Takbon' image need be divided into two extreme regions, information and background one due to its stroke combinations. The main idea is the line process, comparing with the conventional ICM approaches which were based on partially rectangular structured point process. For calculating geometrical mechanism, we have defined line-fitting functions at each current pixel array which form the set of linear lines with gradients and lengths. By applying the Bayes' decision to this set, the region of the current pixel is decided as one of the binary levels. In this case, their statistical reiteration for distinct tracking between intra and extra region offers a criterion to decide the attachment at each step. Finally simulations using the binary 'Takbon' image are provided to demonstrate the effectiveness of our new algorithm

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.4
• /
• pp.691-698
• /
• 2008

This paper describes a 3.3V 10 bit CMOS digital-to-analog converter with a divided architecture of a 7 MSB and a 3 LSB, which uses an optimal Thermal-to-Binary Decoding method with monotonicity, glitch energy. The output stage utilizes here implements a return-to-zero circuit to obtain the dynamic performance. Most of D/A converters in decoding circuit is complicated, occupies a large chip area. For these problems, this paper describes a D/A converter using an optimal Thermal-to-Binary Decoding method. the designed D/A converter using the CMOS n-well $0.35{\mu}m$ process0. The experimental data shows that the rise/fall time, settling time, and INL/DNL are 1.90ns/2.0ns, 12.79ns, and a less than ${\pm}2.5/{\pm}0.7\;LSB$, respectively. The power dissipation of the D/A converter with a single power supply of 3.3V is about 250mW.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.459-461
• /
• 2022

One of the big differences between Network-on-Chip (NoC) and the existing parallel processing system based on an off-chip network is that data packet routing is performed using a centralized control scheme. In such an environment, the best-effort packet routing problem becomes a real-time assignment problem in which data packet arriving time and processing time is the cost. In this paper, the Hungarian algorithm, a representative computational complexity reduction algorithm for the linear algebraic equation of the allocation problem, is implemented in the form of a hardware accelerator. As a result of logic synthesis using the TSMC 0.18um standard cell library, the area of the circuit designed through case analysis for the cost distribution is reduced by about 16% and the propagation delay of it is reduced by about 52%, compared to the circuit implementing the original operation sequence of the Hungarian algorithm.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.10
• /
• pp.1905-1919
• /
• 2000

The main motivation of this research is to develop an intelligent control strategy for Activated Sludge Process (ASP). ASP is a complex and nonlinear dynamic system because of the characteristic of wastewater, the change in influent flow rate, weather conditions, and etc. The mathematical model of ASP also includes uncertainties which are ignored or not considered by process engineer or controller designer. The ASP is generally controlled by a PID controller that consists of fixed proportional, integral, and derivative gain values. The PID gains are adjusted by the expert who has much experience in the ASP. The ASP model based on $Matlab^{(R)}5.3/Simulink^{(R)}3.0$ is developed in this paper. The performance of the model is tested by IWA(International Water Association) and COST(European Cooperation in the field of Scientific and Technical Research) data that include steady-state results during 14 days. The advantage of the developed model is that the user can easily modify or change the controller by the help of the graphical user interface. The ASP model as a typical nonlinear system can be used to simulate and test the proposed controller for an educational purpose. Various control methods are applied to the ASP model and the control results are compared to apply the proposed intelligent control strategy to a real ASP. Three control methods are designed and tested: conventional PID controller, fuzzy logic control approach to modify setpoints, and fuzzy-PID control method. The proposed setpoints changer based on the fuzzy logic shows a better performance and robustness under disturbances. The objective function can be defined and included in the proposed control strategy to improve the effluent water quality and to reduce the operating cost in a real ASP.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.4
• /
• pp.102-113
• /
• 2005

Ecosystem is composed of human, biotic and abiotic environment. Landscape is an ecosystem which appear in a unit region. These landscape are the spatiotemporal land mosaic which is combined with various landscape elements. And, land use and land cover changes are important factors of landscape structure changes. This study is mainly focused on the analysing the spatiotemporal change patterns of Daegu metropolitan sphere forest landscape, using landscape indices and Ecosystem Service Value (ESV) which quantify ecosystem structures and functions. The results of this study are as follow: The encroachment and fragmentation of forest were due to linear developments, i. e. road construction, rather than large-scale developments such as residental lands or industrial complexes. And, the core area percentages of landscape gradually decreased and these could possibly deteriorate the soundness of forest areas by reducing the core areas which are habitats of species. In addition, there was intimate relations between ESV and forest landscape area. The results of this study can be detached standards for impartial judgements between the logic of development & conservation, and basic standards for the establishment of development plans, i. e. metropolitan-plans, which are adequately reflected ecosystem value.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.185-194
• /
• 2005

In the perspective of hybrid, design contains confused forms and styles. Thus, the question is what 'decisively affects' on life, happiness and peace of human beings: In the past scientific ecology that tries to solve the problem in the aspect of functional design was important. Now the question is beyond the scientific ecology because human has a different way of environmental adaptation from animals. From this point of view, design is defined as something beyond materialistic standard. Terry Eagleton said, 'Creative ability deviating oneself and transcending is the very standard to measure human beings' A tendency to hybridize one's own section off genre or pursuing dismantlement is found on such creative perspective. In other words, it focuses on making a space of human's cultural behavior by unifying creatively natural environment and architecture space in the organic aspect. Such phenomenon provides a new chance and possibility in environmental design through a new molding experiment according to the development of digital technology. As experiments of environment design using digital technology are actively implemented, ecological and cultural views hybridize to create a new cultural space of various functions and features. Such experiment in environment design highlights the connections of ecological view, recognition of value, and relation-centered ideas, and enables a tool pursuing a new cultural development. This study focuses on the paradigm of such digital hybrid design and purposes to set the system by analyzing the application styles and principles of environment design through theoretical and case studies. In addition, it promotes a new possibility to develop environment design in the history of civilization.