• Resources Recycling
• /
• v.31 no.2
• /
• pp.49-55
• /
• 2022

In the present study, the thermodynamic evaluation of the sulfate-roasting process was conducted to extract vanadium from the Korean vanadium titano-magnetite ore. The leaching efficiency of vanadium and other impurities was analyzed for varying roasting temperatures and addition of Na₂SO₄. In the case of sulfate roasting, the roasting temperature was 200 ℃ higher than that previously observed Na₂CO₃ roasting. However, the higher leaching efficiency of vanadium and lower leaching efficiency of other impurities, such as aluminum and silicon, were observed. The high selectivity for the extraction of vanadium in sulfate roasting would result from the reaction mechanism between SO₂ gas and vanadium concentrate.

• Korean Journal of Food Science and Technology
• /
• v.29 no.1
• /
• pp.133-137
• /
• 1997

Bean cooking water was used as a raw material for the production of soy-oligosaccharides. To maximize the yield of the physiologically functional oligosaccharides such as raffinose and stachyose, a fermentation process was introduced to reduce sucrose content. Yeast strains utilizing sucrose, but scarcely affecting the raffinose and stachyose for the growth were initially selected to reduce the sucrose content in the bean cooking water. The selected strains were Saccharomyces cerevisiae ATCC 9763, S. cerevisiae KCTC 7039 and Hansenula anomala KFRI 626. Bean cooking water with 2% inoculation volume of these yeasts was fermented until 48 hrs, respectively. The results of sugar analysis according to the fermentation time showed, bean cooking water treated with S. cerevisiae KCTC 7039 and H. anomala KFRI 626 used almost sucrose without decreasing stachyose for the growth.

• Resources Recycling
• /
• v.32 no.1
• /
• pp.33-41
• /
• 2023

Herein, we selectively recovered Zn and produced ZnSO₄ from electric arc furnace dust using a hydrometallurgical process. The analysis of the properties of the electric arc furnace dust revealed that the Fe content (9.9%) was relatively low while the Mn content (19%) was high as compared to the composition of general dust. Therefore, an appropriate hydrometallurgical process was designed based on the properties of the raw materials. In the leaching process involving the use of 1.6 M sulfuric acid and 20% solid-liquid ratio at 60℃ for 1 h, 85% of the Zn and Mn got dissolved while the Fe was not leached. To selectively recover Zn, a solvent extraction process using D2EHPA as the extractant was chosen, and 99% of the Zn was extracted using 0.8 M D2EHPA with 32% saponification and an O/A ratio of 2 using counter-current 3-stage extraction. Mn was entirely scrubbed with an aqueous sulfuric acid solution of pH 1.5. Finally, Zn was concentrated and stripped using 1.5 M sulfuric acid at an O/A ratio of 4 using counter-current 4-stage stripping. The stripping solution contained 40 g/L of Zn, and 99.9% of ZnSO₄∙H₂O was obtained by vacuum distillation.

• Journal of the Speleological Society of Korea
• /
• no.88
• /
• pp.51-62
• /
• 2008

동굴내부의 지형변형은 동굴내의 외인적인 요인과 내인적인 요인에 의하여 발달된다. 외인적인 요인으로서 기후변동에 의한 기온의 변화와 침출수의 증감 및 외부 이입물질 등을 들 수 있으며, 내인적인 요인으로서는 암석의 공극율, 지질환경, 단층 및 습곡면의 형상, 절리 및 균열면의 유무, 동굴지천의 구배 및 유속, 층리간의 이종의 암석게재 여부 등을 들 수 있다. 동굴 시스템은 수문 물리화학적 요소에 의해 형성되며 외부 기준면 통제에 의해서 암석학, 구조학, 기후학, 생물학, 토양학 등과 밀접한 상태에서 의존적인 발달 과정을 가진다. 동혈 내부의 침식은 유수의 입력 경우 유출과정에서 형성되며, 또한 유수의 비 입력 경우유출 및 액체용액의 분출에 의해서 형성된다. 다수의 동굴학자들은 동굴은 계절마다 침수되거나 빨리 흐르는 홍수에 의한 폭우에 의해 epiphreatic 상태에서 간헐적으로 포화되는 과정을 거치며 선택적으로 발달한다고 주장하고 있다. 혼합지대 동굴의 가장 좋은 예는 현재의 카르스트 지역에서 나타나는 것이 아니라 과거 제4기의 200만년전 동안보다 해수면이 더 안정적이었던 때에 이루어진 고 카르스트(Paleo Karst)에서 발견되고 있다.

• Resources Recycling
• /
• v.15 no.5 s.73
• /
• pp.3-10
• /
• 2006

The solvent extraction for the separation of platinum group metals from the leach liquor of spent automotive catalysts has been studied. Tri-n-butyl phosphate (TBP), tri-n-octylamine (TOA) and di-n-hexyl sulfide (DHS) were used as extractants and kerosene as a diluent. The extraction behavior of platinum, palladium and rhodium has been investigated as functions of different kinds of extractants and their concentrations. In addition, the extraction behavior of the major metal impurities such as cerium, lead, iron, magnesium and aluminum has been investigated. Platinum and palladium were extracted with TBP. And platinum, palladium and rhodium were extracted with TOA. Platinum was co-extracted with palladium into the organic phase by solvent extraction using SFI-6 of DHS extractant, but only palladium was selectively extracted with SFI-6R. The selective extraction of palladium with SFI-6R was found better than that with SFI-6, but the kinetics of extraction with SFI-6R was found poor in comparison to SFI-6. The metal impurities extracted simultaneously during the extraction of platinum group metals should be removed in scrubbing and stripping processes. A suitable process has been proposed for the separation of platinum group metals from the leach liquor of spent automotive catalysts. Initially palladium was extracted with SFI-6R, followed by the separation of platinum with TBP or TOA leaving rhodium in the raffinate.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.338-338
• /
• 2022

2050년까지 탄소중립 사회구현을 위한 방안을 모색하기 위한 논의가 활발히 이루어지고 있으며, 이에 수소도시 실현을 통한 화석연료와 탄소배출을 줄이는 방법들이 주목받고 있다. 그린수소가스의 생산 및 운송, 저장과 가스형태의 수소를 액화 수소로 압축시키는데 드는 막대한 에너지가 소비되는 문제점에 대한 대안책으로 암모니아를 캐리어로 이용하여 운송 및 저장하고 수소를 생산하는 방식이 널리 이용되고 있으며, 효율 향상을 위한 추가 연구들이 진행되고 있다. 또한, 중국에 대한 우리나라의 요소수 수입 의존도가 높음에 따라 요소수 주요성분인 암모니아와 탄산가스를 합성한 요소수 생산 방식에 대한 연구가 이루어지고 있다. 하지만, 현재 산업계에서 석탄과 같은 석유자원에서부터 암모니아를 추출하는 방식이 가장 널리 적용되고 있다. 이와 같은 암모니아 생산에 대한 석유자원 의존도를 낮추기 위한 방안에 대한 도출 및 연구가 필요한 실정이다. 이와 같은 상황에 맞춰 본 연구에서는 생활하수로부터 암모니아를 추출하는 방법으로서 통합형 막증류 시스템에 연구하고자 한다. 분뇨, 음식물 폐기물 침출수 등 유기성 폐기물의 수집, 운송 및 처리에서 발생되는 생활하수에는 암모니아성 질소 및 탄소가 다량 포함되어 있어 이를 추출하여 순수한 암모니아 생산에 대해 석유자원을 대체할 수 있는 대안으로서의 효용성을 갖고 있다. 하지만, 이와같은 생활하수는 암모니아성 질소 이외 성분들이 고농도로 포함되어 있어 암모니아 생산에 대한 원료만을 선택적으로 분리하는데 많은 어려움이 있다. 본 연구에서는 생활하수에서 암모니아를 선택적으로 분리하는 방법으로서 막증류(Membrane Distillation, MD) 기반의 통합 암모니아 분리기술을 개발하고 이에 대한 적용 가능성과 효율 향상에 대해 평가 하였다. 또한, 암모니아와 탄산가스 합성을 통한 요소수 생산 방법에 대한 연구를 진행하였다.

• Journal of Korea Soil Environment Society
• /
• v.2 no.2
• /
• pp.81-94
• /
• 1997

In many solute transport studies, either flux or resident concentration has been used. Choice of the concentration mode was dependent on the monitoring device in solute displacement experiments. It has been accepted that no priority exists in the selection of concentration mode in the study of solute transport. It would be questionable, however, to accept the equivalency in the solute transport parameters between flux and resident concentrations in structured soils exhibiting preferential movement of solute. In this study, we investigate how they differ in the monitored breakthrough curves (BTCs) and transport parameters for a given boundary and flow condition by performing solute displacement experiments on a number of undisturbed soil columns. Both flux and resident concentrations have been simultaneously obtained by monitoring the effluent and resistance of the horizontally-positioned TDR probes. Two different solute transport models namely, convection-dispersion equation (CDE) and convective lognormal transfer function (CLT) models, were fitted to the observed breakthrough data in order to quantify the difference between two concentration modes. The study reveals that soil columns having relatively high flux densities exhibited great differences in the degree of peak concentration and travel time of peak between flux and resident concentrations. The peak concentration in flux mode was several times higher than that in resident one. Accordingly, the estimated parameters of flux mode differed greatly from those of resident mode and the difference was more pronounced in CDE than CLT model. Especially in CDE model, the parameters of flux mode were much higher than those of resident mode. This was mainly due to the bypassing of solute through soil macropores and failure of the equilibrium CDE model to adequate description of solute transport in studied soils. In the domain of the relationship between the ratio of hydrodynamic dispersion to molecular diffusion and the peclet number, both concentrations fall on a zone of predominant mechanical dispersion. However, it appears that more molecular diffusion contributes to the solute spreading in the matrix region than the macropore region due to the nonliearity present in the pore water velocity and dispersion coefficient relationship.

• Resources Recycling
• /
• v.30 no.6
• /
• pp.36-42
• /
• 2021

Spent lithium-ion batteries are treated by reduction-smelting at high temperatures to recover valuable metals. Solvent extraction and precipitation of the HCl leaching solution of reduction-smelted metallic alloys resulted in a filtrate containing Ni(II) and a small amount of Si(IV). Adsorption and precipitation experiments were conducted to recover pure Ni(II) compounds from the filtrate. Si(IV) was selectively loaded onto polyacrylamide, but this method did not efficiently filter the solution due to an increase in viscosity. The addition of Na₂CO₃ as a precipitant to the filtrate led to the simultaneous precipitation of Ni(II) and Si(IV). However, it was possible to recover nickel oxalate with a purity higher than 99.99% by selectively precipitating Ni(II) with the addition of Na₂C₂O₄ as a precipitant.

• Resources Recycling
• /
• v.26 no.5
• /
• pp.3-11
• /
• 2017

Solvent extraction is an important process to recover pure gold and silver from various leaching solutions. The present work reviews the aqueous chemistry and solvent extraction separation of gold (I, III) and silver (I) from several leaching systems such as cyanide, thiocyanate, thiosulfate, thiourea and chloride medium. The extraction and separation behavior of gold (I, III) and silver (I) by various single and mixtures was compared on the basis of extraction reaction and the selectivity from these mediums. The chloride medium is recommended for the separation of gold and silver by solvent extraction in terms of extraction and stripping efficiency.

• Resources Recycling
• /
• v.30 no.5
• /
• pp.32-37
• /
• 2021

Thorium extraction and possible separation from monazite leaching solution was studied. Primary amine Primene JM-T was select ed for t horium ext ract ion processing. Various experiment s were t est ed and est ablished for t he t horium liquid -liquid extraction process. The screening of extractant, lower pH conditions, extractant variation and extraction isotherms construction, and finally, stripping studies were established.