• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.1
• /
• pp.3-10
• /
• 1990

Hull form can be described numerically by two approaches, one is to describe a hull form with a set of curves("curve approach"), and the other is to describe it with surfaces directly("surface approach"). This paper describes the numerical definition scheme of hull form using curve approach method which defines the hull form by a set of curves consisting of 2-dimensional transverse section curves and 3-dimensional longitudinal curves. A set of curves in the hull form definition scheme is described by the modified cubic spline which modified the general parametric cubic spline in order to ensure a very smooth curvature distribution within the curve segment even though a curve segment has large tangent angle at its end points. Illustrative examples are given showing the application of the method to represent the hull form of SWATH ship and oceanographic research vessel. Also, examples for hull form transformation are shown by using this method connected with transformation technique.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.1
• /
• pp.19-26
• /
• 1996

An experimental and computational study of the pressure fluctuation induced by a propeller on a hull surface was carried out with three ship models and seven model propellers. The fluctuation of pressure on a flat plate was measured at KRISO cavitation tunnel and calculated by a panel and lifting surface method(XForShip code). To extend the measurement data on the flat plate into that on complex hull forms, the correction factor was determined as a ratio of the solid boundary factor(SBF). The computation of pressure fluctuation around complex hull forms was also performed to make the full scale prediction and compared with the corrected experimental data. The calculated values agreed well with the compensated experimental data and it was found that the correction factor was about 0.65-0.7.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.32 no.1
• /
• pp.21-27
• /
• 1995

초고속선에 관련된 점성유동은 저한성능 향상과 운항자세 제어를 위해 사용되는 다양한 선체부 가물의 저항 예측과 초고속선에 많이 사용되는 물분사 추진장치 입구 형상의 설계 그리고 임펠 러에 이르는 덕트 유동의 예측을 중심으로 관심을 받아왔다. 본 소고에서는 통상적인 선박의 경우와는 구별되는 초고속선 고유의 점성유동 특성에 관하여 간략히 논의하기로 하고 내용을 크게 선체-부가물 점성유동과 물분사 추진장치에 관련되어 있는 덕트유동으로 나누어 기술하 였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.4
• /
• pp.66-74
• /
• 1996

In this paper, a 3-dimensional ship structural model which includes the longitudinals and stiffeners is constructed. This model can be constructed from the well-defined data structure which represents the ship structural members and their relationship. So the object-oriented concept for the data structure is introduced. The structural analysis model is automatically generated by extracting the necessary information for structural analysis from the ship structural model : Users need to handle the ship structural model only when any design change occurs because the structural analysis model is automatically generated.

• Journal of the Korean Professional Engineers Association
• /
• v.27 no.3
• /
• pp.121-131
• /
• 1994

It is very difficult to partially describe the hull shape made up of 3-dimensional free form surface. With computerizing skill in ship design, the geometric modeling technique has been developed. In hull shape modeling, the blending technique has not yet been adapted to the hull shape surface has a variable curvature. By adapting the blend surface, small surface on drawing plane is to be softly blended with given hull surface and a projecting part. This study has adapted to the ship design one of the blending methods by which offsets data of the blend surface can be obtained by the input of blend radius on two base surfaces.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.42 no.3 s.145
• /
• pp.36-39
• /
• 2005

현재 당사가 보유하고 있는 조선 전용 CAD시스템은 모델링을 통해 도면제작 기능까지 일관하게 제공하고 있지만 시뮬레이션이나 3D 가시화를 위한 시스템이 부재한 실정이다. 이에 상용 기술인 VRML을 이용하여 선박 블록 및 ASSY별 형상을 가시화 하고, 그 형상정보에 생산에 필요한 정보를 포함하여 쉽게 Navigation 및 Walkthrough가 가능하다. 이런 가시화 기술을 기간 ERP 시스템과 접목하여 용접로봇 시스템을 개발하였고, 공정 스케줄에 따라 용접로봇 시스템에 필요한 형상정보를 생성해 용접 NC Data를 생성한다.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.2
• /
• pp.28-33
• /
• 2002

The characteristics of hull-pieces are large quantity, comparatively large piece-size, and different each shape. For the more, in the forming process(including Line-Heating Process) of curved hull pieces, shape checking processes including initial shape measurement and forming shape measurement of the each pieces are needed to achieve a given accuracy. So, the forming process of large curved hull pieces needs efficient measurement and comparison technique to check the shape and ensure the forming-accuracy In this paper, we try to construct integrated S/W, H/W system for efficient measurement and comparison of large curved hull pieces, which can apply to above forming environment.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.923-929
• /
• 2018

In this study, we analyzed the resistance performance and running attitude of a catamaran by numerical analysis with a conventional bow, which is generally applied, and a reverse, protruding bow. The shape of the reverse bow was compared through numerical analysis and model tests. The reverse bow shape showed an improved wave pattern by shifting the generation position of the forward divergent wave to the aft in comparison with a conventional bow shape. This effect was found to be effective in determining resistance and stable running attitude. The hull resistance improved by about 2.95 %. The comparative numerical analysis and model test for the reverse bow shape completed in this study should be useful for future hull design application.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.152-172
• /
• 1992

The ship sailing among waves are suffered the various wave loads that comes from its motion throughout its life. Because there are dynamic, the analysis of ship structure must be considered as the dynamic problem precisely. In the rationally-based design, the dynamic structural analysis is carried out using dynamic wave loads provided from the results of the ship mouton calculation as the rigid body. This method is based on the linear theory assumed low wave height and small amplitude of motion. But at the rough sea condition, high wave height, relatively ship's depth, is induced the large ship motion, so the ship section configulation below water line is rapidly changed at each time. This results in non-linear problem. Considering above situation in this paper, the strength analysis method is introduced for the hull glider among waves considering non-linear hydrodynamic forces. This paper considers that the overall or primary level of the ship structural dynamic loading and dynamic response provided from the non-linear wave forces, and bottom and bow flare impact forces estimated by momentum slamming theory, in which the ship is idealized as a hollow thin-walled box beam using thin-walled beam theory and the finite element method. This method is applied to 40,000 Ton Double-Skin Tanker and attention is paid to the influence of the response of ship speed, wave length and wave height compared with linear strip theory.

• Journal of Navigation and Port Research
• /
• v.29 no.8 s.104
• /
• pp.667-671
• /
• 2005

This study was carried out to examine the prediction of ship's manoeuvrability in initial design stage. New parameter representing basic hull form and stem shape were proposed. Captive model test were carried out to investigate the correlation coefficient between hydrodynamic coefficient and hull parameter. The results showed which parameter are positive correlation with hydrodynamic coefficient. Moreover correlation was examined between stem hull shape and ship's manoeuvrability. New empirical formulas for hydrodynamic coefficients were proposed These results can be used to predict a ship's manoeuvrability in initial design stage.