• 해운
• /
• no.3 s.14
• /
• pp.12-15
• /
• 2005

해양오염방지협약(MARPOL) 부속서 I 13H 신설에 따라 단일선체 유조선에 의한 중급유 운송이 2005년 4월5일 이후에는 금지된다. 이에 따라 해양수산부는 3월10일 한국선주협회와 외항해운업계 관계자들이 참석한 가운데 대책회의를 열고 대응방안을 논의했다. 다음은 논의된 영향분석과 대처방안을 정리한 것이다(편집자 주)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.744-750
• /
• 2013

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.6
• /
• pp.1515-1524
• /
• 2015

Recently, for the purpose of preventing the corrosion of a vessel, the electrical corrosion protection device that prevents the corrosions of the hull and the propeller is widely used. However, the electrical corrosion protection method artificially emits the current into the seawater around the hull using the power supply in order to make the hull and propeller be in the state of not being corrosion, so that electromagnetic field is generated outside the hull by the current emitted into the seawater. In this paper, the static and alternating constituents of the electromagnetic field generated in underwater outside the hull are analyzed and a countermeasure is investigated to reduce the strength of the electromagnetic field. In conventional shaft grounding system, the shaft potential is maintained above at least 100mV and the alternating current component constitutes more than 10% of the total current. However, in this paper, a control system was designed in order that the alternating current component and the shaft potential which generate electromagnetic field are maintained within 1% and 2mV respectively, and the performance was verified by simulation.

• Journal of Navigation and Port Research
• /
• v.39 no.1
• /
• pp.37-43
• /
• 2015

At marine construction sites, there are problems with regard to dispute on the responsibility of safety management of chartered barge and its legal issues. In general, demise charter with crew is used for barge charterparty which is committed to the marine construction. Although Chapter 5 of the Korean Commercial Act enact provisions regulating a Time Chargerparty and a Bareboat Charterparty, it is difficult to clarify where the responsibility lies with regard to the safety control of the chartered barge. For this reason, disputes on accountability arise when accident occurs in effect. As a result, parties of the charterparty shift the responsibility on each other and there is increased risk for occurrence of similar accidents. There is no legally required qualification for a head of barge workers who is in charge of barge management. It is not possible to demand the head of barge workers to take charge of tasks which requires professional judgment as a marine technician considering his daily work scope. Furthermore, the barge committed to the marine construction as a form of bareboat charter or equipment charterage is an object which should be managed by safety supervisor of the charterer's marine construction. The charterer bears a duty to manage the safety of the barge. Therefore, the charterer is generally liable for the damage incurred in the course of using the chartered barge.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.152-172
• /
• 1992

The ship sailing among waves are suffered the various wave loads that comes from its motion throughout its life. Because there are dynamic, the analysis of ship structure must be considered as the dynamic problem precisely. In the rationally-based design, the dynamic structural analysis is carried out using dynamic wave loads provided from the results of the ship mouton calculation as the rigid body. This method is based on the linear theory assumed low wave height and small amplitude of motion. But at the rough sea condition, high wave height, relatively ship's depth, is induced the large ship motion, so the ship section configulation below water line is rapidly changed at each time. This results in non-linear problem. Considering above situation in this paper, the strength analysis method is introduced for the hull glider among waves considering non-linear hydrodynamic forces. This paper considers that the overall or primary level of the ship structural dynamic loading and dynamic response provided from the non-linear wave forces, and bottom and bow flare impact forces estimated by momentum slamming theory, in which the ship is idealized as a hollow thin-walled box beam using thin-walled beam theory and the finite element method. This method is applied to 40,000 Ton Double-Skin Tanker and attention is paid to the influence of the response of ship speed, wave length and wave height compared with linear strip theory.

• Explosives and Blasting
• /
• v.37 no.3
• /
• pp.13-24
• /
• 2019

This paper was prepared to investigate the behavior of fragments in underwater torpedo explosion beneath a frigate or surface ship by using an explicit finite element analysis. In this study, a fluid-structure interaction (FSI) methodology, called the multi-material arbitrary Lagrangian-Eulerian (MM-ALE) approach in LS-DYNA, was employed to obtain the responses of the torpedo fragments and frigate hull to the explosion. The Euler models for the analysis were comprised of air, water, and explosive, while the Lagrange models consisted of the fragment and the hull. The focus of this modeling was to examine whether a worst-case fragment could penetrate the frigate hull located close (4.5 m) to the exploding torpedo. The simulation was performed in two separate steps. At first, with the assumption that the expanding skin of the torpedo had been torn apart by consuming 30% of the explosive energy, the initial velocity of the worst-case fragment was sought based on a well-known experimental result concerning the fragment velocity in underwater bomb explosion. Then, the terminal velocity of the worst-case fragment that is expected to occur before the fragment hit the frigate hull was sought in the second step. Under the given conditions, the possible initial velocities of the worst-case fragment were found to be very fast (400 and 1000 m/s). But, the velocity difference between the fragment and the hull was merely 4 m/s at the instant of collision. This result was likely to be due to both the tremendous drag force exerted by the water and the non-failure condition given to the frigate hull. Anyway, at least under the given conditions, it is thought that the worst-case fragment seldom penetrate the frigate hull because there is no significant velocity difference between them.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.4
• /
• pp.457-464
• /
• 2021

Cargo securing safety, which is one factor for the safe operation of car ferry ships, has been applied since 2015 and evaluated by comparing the hull motion and securing load capacity generated by waves. To ensure the safe operation of the 3700 ton class car ferry, it is important to analyze the hull acceleration motion based on the sea wave information of the navigation area to determine the cargo securing load that can prevent the movement of cargo. In this study, the meteorological information of three wave buoys installed in Busan and Jeju area was analyzed for the past 5 years. In addition, the hull acceleration was measured in actual sea conditions and compared to that of numerical simulations. Under the condition of a significant wave height of 2.5 m from Feb to Mar, except typhoon seasons, the lateral acceleration was observed to be 1.5 m/s² in real ship measuring and 1.8 m/s² in numerical calculation. It was analyzed to be less than 40% under general weather conditions compared to the high wave warning using an approximate formula for estimating the hull motion by wave height. The cargo securing safety proposed in this study will be widely used based on the actual measuring acceleration with the sea wave height.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.30 no.4
• /
• pp.20-26
• /
• 1993

본 연구는 CSDP-선체 CAD 시스템 개발'4' 세부과제의 일환으로 수행되었으며 세부과제는 선체 구조 설계 기능을 전산화하기 위한 목표를 설정하고 CSDP 연구사업의 첫해년도부터 지금까지 4년간 수행하였다. 1차년도('88년∼'89년)에는 그 당시까지 단편적으로 개발된 구조설계 프로그 램을 통합하여 살물선 중앙부에 대해 선급규정에 의한 종강도 부재의 배치 및 치수결정 프로그 램을 개발하였다. 2차년도('89년∼'90년)에는 1차년도의 연구결과를 힁부재 및 힁격벽 부재까지 확장하여 살물선 중앙부의 종강도 부재, 힁격벽 부재의 배치 및 치수결정 프로그램을 개발하여 살물선 중앙부의 구조설계를 지원하는 프로그램을 완성하였다. 3차년도('91년∼'92년)에는, 이 중선각 유조선에 대한 관심이 고조되고 있는 바, 동 세부과제에서도 조선소의 요구에 따라 대상 선박을 살물선에서 이중선각 유조선으로 확장하고, 기존의batch방식을 대화식으로 교체하여 선급규정(DnV, L1oyd)에 의한 종강도 부재의 설계 기능과, 간이 해석에 의한 대화식 이중선각 유조선 중앙부의 구조배치 및 치수결정 기능을 갖는 프로그램(ISSMID_T)을 개발하였다. 당해 연도인 4차년도에는, 3차년도까지 개발한 프로그램의 기능, 성능을 보완 확장하였고, 또한 조선 전용 선체 CAD시스템(AUTOKON)과의 Interface도 삼성중공업과 공동으로 개발하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.2
• /
• pp.109-117
• /
• 2000

In order to develope ship hull forms. many various models are represented numerically in terms of B-spline surfaces and tested experimentally in the towing tank. It is very difficult to make various ship hulls with free forms in handiwork. As the first step of development of a free form cutting machine which becomes a good substitute for high-priced model cutting machines, free forms representation for model cutting are developed. In this paper, NURBUS surfaces are represented on the assumption that data points may be control points contrary to existing methods.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.2
• /
• pp.96-110
• /
• 1996

Aging ships can suffer structural damage due to corrosion, fatigue crack etc., and possibility of catastrophic failure of seriously damaged ships is very high. To reduce the risk of loss of ships due to hull collapse, it is essential to evaluate ultimate hull strength of aging ships taking into account various uncertainties associated with structural damages. In this paper, ultimate strength-based reliability analysis of ship structures considering wear of structural members due to corrosion is described. A corrosion rate estimate model for structural members is introduced. An ultimate limit state function of a ship hull is formulated taking into account corrosion effects. The model is applied to an existing oil tanker, and reliability index associated with hull collapse is calculated by using the second-order reliability method (SORM). Discussions on structure safety of corroded ships are made.