• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.3
• /
• pp.1-7
• /
• 1999

This paper describes the modification of hull bottom for the air lubrication technique to the passenger boat in service at the Chung-Ju lake, which has a large beam-draft ratio. From numerical analysis of 2-D cavity problem by potential theory, the cavity shape, length and the pressure in cavity are estimated for the simplified geometry of hull bottom, and the non-dimensional parameters affecting air cavity phenomena are investigated. Extensive resistance tests for the model ship which has variation of step height and side strip have been performed to investigate the formation of air cavity and the drag reduction effectiveness. And also, the development of attached cavity to the bottom were observed from the flat bottom made by transparent acrylic plate. From this survey on the modification of bottom shape and the air lubrication technique, the total resistance of model ship could be reduced by about 25% at the design speed compared to the proto type hull form.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.60-64
• /
• 2001

This paper describes the development of catamaran type powerboat applicable to leisure and transportation in the sea. Recently, the increasing prosperity of the leisure population has resulted in an increased popularity and need for recreational equipment such as water leisure powerboat. To satisfy the popularity and the need, catamaran type powerboat is developed applicable to leisure and simultaneously, as a means of tranportation for a short distance in the sea through the design using 3-Dimensional modeling method and experiments in circulating wate channel.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.4
• /
• pp.359-364
• /
• 2001

This paper presents case studies on the multi-species fisheries in Korean waters, Multi-species fisheries were divided into two types, that is, multi-species by a single fishery and single species by multiple fisheries. For the case of single species by multiple fisheries, the small yellow croaker stock caught mainly by the Korean pair trawl fishery and the Korean stow net fishery was selected. This approach uses both standardized fishing efforts for the two fisheries by a general linear model and some data for the economic analysis, and then estimates maximum sustainable yield (MSY), maximum economic yield (MEY) and fishing efforts for MSY and MEY, An analysis of interaction aspects between pair trawl and stow net fisheries was carried out to predict the optimal level of fishing effort from the economic point of view, which gives the largest benefits to the two fisheries.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.1106-1115
• /
• 2021

In this study, a fin that controls ship stern flow was attached on stern hull of a 80k bulk carrier to improve resistance performance. The rectangular cross-sectional fin was attached at several locations on the hull, and angle to streamline was changed with constant length, breadth, and thickness. The resistance performance and wake on propeller plane of the hull with and without the fin were analyzed using model-scale computational fluid dynamics simulation. The analysis results were extrapolated to full-scale to compare the performance and wake of the full-scale ship. First, the fin changed path of bilge vortex that flowed into the propeller along the stern hull without the fin to transom stern. This change increased pressure of the stern hull and upper region of the propeller, so pressure resistance and total resistance of the hull were reduced - the nearer the fin location to after perpendicular (AP) and base line of the hull, the larger the reduction of the resistances. Second, nominal wake fraction of the hull with the fin was lower than that without the fin. This dif erence was in proportion to the angle of the fin, but the total resistance reduction was in proportion until a certain angle at which the reduction was maximum. The largest total resistance reduction was approximately 2.1% at 12.5% of length between perpendiculars from the AP, 10% of draft from the base line, and 14° with respect to the streamline.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.418-423
• /
• 2018

Recently, research and development of high-value leisure vessels has been carried out in Korea to revitalize the marine leisure industry and tap into the global maritime leisure market. FRP composite materials, which have excellent physical properties and are available for the manufacture of light hulls, are used widely. One of the most important design technologies is to secure structural safety of leisure vessels made from FRP composite materials. In this study, the structural strength was assessed for the design of an 8-meter high-speed planing leisure boat made from FRP composite materials. The design loads to verify the structural safety were calculated according to the rules for the classification of high speed light craft (KR, 2015), and structural analysis was conducted using a finite element model composed of an isotropic shell element, which has equivalent bending rigidity with the FRP sandwich panel. The analysis results were compared with the results of the strength test for fabricated specimens, and all internal structural components are sufficiently satisfied with the structural strength.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.708-711
• /
• 2011

The Navy is in the process of developing a sonar-operation strategy to increase the effectiveness of underwater target seeking capability. HMS is the basic strategy to detect underwater targets. The advantages of HMS is that, it has a short preparation time to operate and can be always used regardless of sea conditions and weather. However, it is difficult to effectively detect underwater targets due to the interaction between marine environments and sonar-operations. During the research, the effectiveness of the HMS system's underwater target seeking capability was analyzed by integrating various search patterns and environment conditions into the simulation. In the simulation the ship target an evasive target within a set region. The simulation presented results for an effective searching methods of underwater targets. These research results can be used as foundation for advancing and improving the sonar operational tactics.

• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.16-16
• /
• 2018

2017년 겨울, 기록적인 한파로 인해 바다가 얼면서 인천 앞바다로 유빙이 유입되었다. 2013년 해상에서 유빙이 발견된 이후 약 5년만에 다시 유빙이 등장한 것이다. 중부청 소속 항공단 순찰결과에 따르면, 2018년 1월 12일 인천대교 인근 해상에서 최초로 발견된 이후 강화 연안, 영종도 북단 등 해상에서 광범위하고 불규칙한 형태로 유빙이 분포되어 있는 것으로 나타났다. 유빙의 문제점은 해상에서 선박의 안전운항을 저해하고 경비함정의 안전에 지장을 초래하며 기름 유출 시, 유출유의 거동 특성이 달라져 일반적인 방제방법의 적용이 곤란한 점이다. 이에 따라 해상에서의 해양오염사고 대응방안 마련을 위해 저온 및 유빙 유입 해상에서 유출유의 거동 특성을 알아보았다. 구분인자를 극한의 추위(Extreme Cold), 유빙(Pack Ice), 정착빙(Fast Ice) 3가지로 분류하여 기름의 성상변화 및 시사점을 살펴보고, 유출된 기름의 효율적 방제를 크게 3가지로 분류(기계적 봉쇄 및 회수, 화학적 분산제의 사용, 현장소각)하였다. 일반적인 방제장비를 저온 및 얼음분포 해상에서 사용 시 슬러시화 된 얼음으로 인해 유출유 회수가 어렵고, 동결온도에서 장비가 오작동할 우려가 있다. 이미 북유럽 국가에서는 극한의 추위와 얼음분포 해상에 특화된 방제장비를 도입하여 해양오염대비 대응을 하고 있다. 2003년 3월 발틱해에서 불법적으로 유출한 선저폐수를 특화 장비는 brush bucket 유회수기 이용 방제조치한 사례가 있으며, 2006년 5월 같은 장소에서 선박 침몰로 인한 기름 유출이 발생했을때도 brush bucket 유회수기 이용 방제조치를 하였다. 국내에도 이상 기후로 인해 기록적인 한파가 지속되면서 북극에서나 볼 법한 유빙들이 발견되고, 해양오염사고는 언제 어디서나 발생할 수 있으므로, 해양오염방제의 임무를 맡고 있는 국가기관으로써 특수한 환경까지도 고려하여 대응방안을 마련할 필요가 있다. 해양오염이 재난으로 인식되고 있는 상황에서, 그리고 지구온난화로 인한 이상기후변화가 지속되는 상황에서 겨울철 유빙 유입은 점점 더 많아질 수 있다. 본 연구에서는 자료나 방제경험이 부족하므로 일찌감치 북극항로 개발로 앞선 방제기술과 경험을 가지고 있는 북극이사회를 벤치마킹하여 관할 해역 특성에 맞는 대응방안을 고찰해 본다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.4
• /
• pp.716-722
• /
• 2017

In this paper, a fully printed NFC tag operating at 13.56 MHz was designed and fabricated using silver nano-paste and carbon ink. The proposed NFC tag has a printed coil with an inductance of $2.74{\mu}H$ on a PI film for application to an NFC tag IC with an internal capacitance of 50 pF. Screen printing technology used in this paper has advantages such as large area printing for mass production, low cost and eco-friendly process compared to conventional PCB manufacturing process. The proposed structure consists of a circular coil implemented as a single layer using silver nano-paste and carbon ink, a jumper pattern for chip mounting between the outer edge and the center of the coil, and an insulation pattern between the coil and the jumper pattern. In order to verify the performance of the proposed NFC tag, we performed the measurements of the printing line width, thickness, line resistance, adhesion and environmental reliability, and confirmed the suitability of the NFC tag based on the full-printed manufacturing method.