• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제19권1호
• /
• pp.120-130
• /
• 1994

The leadwire cutting machine that has been used recently cuts leadwires by putting one-side force with the same priciple as a saw, and applies a stress at soldered part of PCB. Because the stress becomes one cause of contact-defect, a leadwire cutting robot that cuts leadwire-site with nipper and does not apply stress is considered, In this paper a technique of detecting leadwire-site is studied for the purpose of using on automatic leadwire cutting robots. A technique deriving 2-dimensional site-information with many I-dimensional binary data of perspective front-view of PCB taken from various direction was proposed. Simulation and experiments were done under the same condition each other and a small universal PCB was choosen as an experimental object. As a result of simulations and experiments, the proposed technique turns out to be very useful for automatic leadwire cutting robots.

• Journal of Sensor Science and Technology
• /
• 제9권4호
• /
• pp.274-280
• /
• 2000

This paper deals with an experimental study to apply commercial semiconductors to measure radiation dose rate for gamma ray. Since the low cost, small size, high efficiency and ruggedness of silicon photodiodes make them attractive photodetectors, they coulde be effectively used in measuring any radiation such as gamma ray. Most PN photodiodes show that the reverse current increases when the light is increased. Therefore the depletion region of them have influence on the reverse current, so we choose silicon PIN photodiodes with large depletion region. In order to detect radiation dose rate and then, to apply in developing any gamma ray dosimeter, some examinations and experiments were performed to PIN photodiodes in this work. Two kinds of PIN photodiodes, such as NEC's PH302 and SIEMENS's BPW34, were tested in a Co-60 gamma irradiation facility with a semiconductor parameter analyzer. As a result, we found that such PIN photodiodes present good linearity in diode current characteristics with dose rate. Therefore silicon PIN photodiodes could be suitably used in designing gamma ray dosimeters.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 한국감성과학회 2009년도 춘계학술대회
• /
• pp.239-242
• /
• 2009

최근 3 차원 측정 기술을 활용한 운동 기능성의 향상을 위한 연구가 활발히 진행되고 있다. 그 예로 3 차원 인체 정보를 이용한 의복패턴 제작 시에 필요한 절개선으로 피부상에서 동작 시 늘어나지 않는 선(Lines of Non-Extension, LoNE)을 찾아내어 활용한 연구가 발표된 바 있다. 이러한 LoNE 은 기존 의복구성을 위한 봉제선이나 기능선으로 활용될 때 동작기능성을 저해하지 않는 특징이 있다. 이에 본 연구에서는 스포츠웨어에서 활동성이 큰 상체의 어깨부위에서 Lines of Non-Extension 을 탐색하고자 하였다. 연구 방법으로는 20 대 후반 남성 2 명을 대상으로 체표의 등 부분에서 3cm 간격으로 계측점을 표시한 후 3D 인체 데이터 (Cyberware, WB)를 획득하였다. 측정시의 자세는 팔을 $30^{\circ}$, $90^{\circ}$, $135^{\circ}$, $180^{\circ}$ 외전시켰다. 피부 표면에서의 길이 변화는 구획의 크기를 달리하면서 가로, 세로, 사선방향으로 동작에 따라서 측정하였다. 변화량은 정자세($30^{\circ}$)를 기준으로 A 라 하였을 때, 기준자세와의 차이가 가장 큰 변화량을 보인 자세를 B 라 하고 A 와 B 간의 차이로 계산하였다. 연구결과, NASA 의 Biosuit 에서 소개된 Iberall(1970)의 LoNE 중 진동둘레를 포함한 팔 부위와 등, 어깨 부위에서 유사한 라인을 찾았다. 본 연구에서와 같이 구획별 사선방향 피부 변화량을 측정하는 것은 피부면에 숨겨진 인간공학적 의복 기능선을 탐색하는 데 효과적임을 확인하였다.

• Journal of Korea Society of Industrial Information Systems
• /
• 제23권6호
• /
• pp.21-27
• /
• 2018

Wearing degree and uneven wearing detection algorithm using horizontal edge information is proposed in this paper. The noise in the input image is removed by bilateral filter, and then edges are extracted from the filtered image by using the proposed mask. As the tire is worn, grooves of tire shoulder or sipes are changed more than the vertical grooves. Therefore the edges from grooves of tire shoulder or sipes have more information about the tire wearing than the edges from vertical grooves. Proposed mask that is reflected this feature is used to extract the horizontal edges. After edge extraction, the edge image is represented in two-level system. The edge pixels of the binarization image are used to decide the wearing degree and uneven wearing. This proposed method can be used easily without any other equipments. The proposed method is conducted with a real vehicle, and the experimental results show the good performance of the proposed method in detecting wearing degree and uneven wearing.

• Journal of the Institute of Convergence Signal Processing
• /
• 제10권1호
• /
• pp.7-12
• /
• 2009

In this paper, we propose a directional feature extraction method for off-line handwritten numerals by using the morphological operations. Direction features are obtained from four directional line images, each of which contains horizontal, vertical, right-diagonal and left-diagonal lines in entire numeral lines. Conventional method for extracting directional features uses Kirsch masks which generate edge-shaped double line images for each direction, whereas our method uses directional erosion operations and generate single line images for each direction. To apply these directional erosion operations to the numeral image, preprocessing steps such as thinning and dilation are required, but resultant directional lines are more similar to numeral lines themselves. Our four [$4{\times}4$] directional features of a numeral are obtained from four directional line images through a zoning method. For obtaining the higher recognition rates of the handwrittern numerals, we use the multiple feature which is comprised of our proposed feature and the conventional features of a kirsch directional feature and a concavity feature. For recognition test with given features, we use a multi-layer perceptron neural network classifier which is trained with the back propagation algorithm. Through the experiments with the CENPARMI numeral database of Concordia University, we have achieved a recognition rate of 98.35%.

• Progress in Medical Physics
• /
• 제22권1호
• /
• pp.52-58
• /
• 2011

Our goal is to assess the suitability of a glass dosimeter on detection of high-energy electron beams for clinical use, especially for radiation therapy. We examined the dosimetric characteristics of glass dosimeters including dose linearity, reproducibility, angular dependence, dose rate dependence, and energy dependence of 5 different electron energy qualities. The GD was irradiated with high-energy electron beams from the medical linear accelerator andgamma rays from a cobalt-60 teletherapy unit. All irradiations were performed in a water phantom. The result of the dose linearity for high-energy electron beams showed well fitted regression line with the coefficient of determination; $R^2$ of 0.999 between 6 and 20 MeV. The reproducibility of GDs exposed to the nominal electron energies 6, 9, 12, 16, and 20 MeV was ${\pm}1.2%$. In terms of the angular dependence to electron beams,GD response differences to the electron beam were within 1.5% for angles ranging from $0^{\circ}$ to $90^{\circ}$ and GD's maximum response differencewas 14% lower at 180o. In the dose rate dependence, measured dose values were normalized to the value obtained from 500 MU/min. The uncertainties of dose rate were measured within ${\pm}1.5%$ except for the value from 100 MU/min. In the evaluation of the energy dependence of the GD at nominal electron energies between 6 and 20 MeV, we obtained lower responses between 1.1% and 4.5% based on cobalt-60 beam. Our results show that GDs have a considerable potentiality for measuring doses delivered by high-energy electron beams.

• Journal of KIISE:Software and Applications
• /
• 제32권11호
• /
• pp.1121-1135
• /
• 2005

This paper proposes a moving object extraction method using the contrast map and salient points. In order to make the contrast map, we generate three-feature maps such as luminance map, color map and directional map and extract salient points from an image. By using these features, we can decide the Attention Window(AW) location easily The purpose of the AW is to remove the useless regions in the image such as background as well as to reduce the amount of image processing. To create the exact location and flexible size of the AW, we use motion feature instead of pre-assumptions or heuristic parameters. After determining of the AW, we find the difference of edge to inner area from the AW. Then, we can extract horizontal candidate region and vortical candidate region. After finding both horizontal and vertical candidates, intersection regions through logical AND operation are further processed by morphological operations. The proposed algorithm has been applied to many video sequences which have static background like surveillance type of video sequences. The moving object was quite well segmented with accurate boundaries.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.118-121
• /
• 2003

지문을 이용한 개인 인증 절차는 지문 형태 별로 구분하는 분류(classification) 과정과 본인임을 확인하는 정합(matching) 과정으로 구분할 수 있다. 지문의 분류와 정합을 위해서는 기존 연구들이 지문의 특징점 수와 방향성의 흐름 패턴에 의존한다. 본 논문에서는 방향성의 흐름 패턴을 이용한 중심점 추출에 초점이 맞춰져 있으며 추출된 중심점 정보는 현재 구현되어진 특징점 추출 정보와 연계해 정합을 위한 기준점으로 활용한다. 중심점 추출 방식은 입력된 지문 영상에 대해 3 $\times$ 3 Sobel 마스크를 적용한 후 8 $\times$ 8블록 영상을 분할하여 각 대표 방향 성분을 추출하며 추출되어진 방향 성분과 특이점 패턴을 비교하여 중심점을 탐색한다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• 제21권2호
• /
• pp.179-187
• /
• 2015

The purpose of this study is to identify the aspect that the traffic distribution function changes, according to the direction of the datum line and the horizontal and vertical positions of the datum point applied when it is calculated. Targeting routes at the entrance of Mokpo Harbor, this study tested using AIS survey data of January 2013 the effects of the three variables-direction of the datum line(${\theta}$), horizontal position($\mathfrak{L}_H$) and vertical position($\mathfrak{L}_V$) on mean ($\bar{x}$) and standard deviation (${\delta}$). The test result showed that $\bar{x}$ and ${\delta}$ were changed according to the change of ${\theta}$, because the extracted sample data were changed according to ${\theta}$; and the changes of $\bar{x}$ and ${\delta}$ according to ${\theta}$ were drawn as the relation of the sine function' sum. In addition, it was found that setting up ${\theta}$ that the change value of ${\delta}$ becomes the least as the direction of the datum line was valid, to determine the optimum passage distribution function on complex waters with multiple branches of route. The result of this study is expected to be used as basic data to understand maritime traffic flow based on more quantified data of normal distribution and make decisions related to maritime traffic safety management.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.573_574
• /
• 2009

전력산업에서 전원설비계획은 매우 중요한 요소이다. 전원설비계획중 발전소 설립에 대한 연구만큼 송전선 증설에 대한 연구도 필요하다고 생각한다. 송전선 증설시 고려해야 될 사항이 많이 있으며, 그것을 체계적으로 정리하여 쉽게 모형화해서 구할 필요가 있다고 생각한다. 이 논문은 좀 더 최적화된 송전선 증설을 위한 모형을 만들어 가는 방향을 제시하고자 한다. 최적전력조류계산(OPF)에 송전선 증설에 따른 비용을 포함하는 모형으로 발전시키는 것을 목표로 하여 다음과 같이 논하고 있다.