• Journal of Navigation and Port Research
• /
• v.26 no.1
• /
• pp.1-7
• /
• 2002

A coastwise chemical tanker sailing at full speed has capsized in calm water and while turing. We investigate reasons of the accident and demonstrate that a proper correction for the free surface effect of the liquid cargo has not been practiced in the initial design stage and that the bow-sinkage induced in sailing has weakened the form stability of the ship. It is also shown that the liquid cargo shift occurring in turning generated a significant outward heel moment.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.4
• /
• pp.3-13
• /
• 1989

In recent towing tank experiments, it has been observed that a ship moving near the critical speed $\sqrt{gh}$(g=gravitational acceleration, h=water depth) radiates solitons upstream in an almost periodic manner. As a ,consequence, the ship experiences considerable changes in resistance, trim and sinkage, or better known as squat. Mei and Choi(1987) developed a nonlinear theory for a slender ship by using the method of matched asymptotic expansions. For a certain class of channel width and ship slenderness, they found that the waves generated can be described by an inhomogeneous Korteweg-de Vries(KdV) equation. The leading-order solution properly predicts solitons propagating upstream, but it fails to render three-dimensional waves in the wake. In this paper a new approach has been made by choosing a different class of channel width and ship slenderness. The wave equation in the farfield turns out to be a homogeneous Kadomtsev-Petviashvili(KP) equation, which predicts solitons upstream and three-dimensional waves in the wake. Numerical results for the wave resistance, sinkage and trim reflect the experimentally identified phenomena.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.7
• /
• pp.863-868
• /
• 2016

In this study, the precise shapes of sunken ships and information on seafloor topography were analyzed using data obtained from a multi-beam echo sounder. The state of each sunken ship was analyzed by processing diverse imagery data which was compared with data obtained from past investigations to determine changes in the state and circumjacent seafloor topography. Apparent changes in the seafloor topography around one sunken ship, the "Pacific Friend", were found from stern to bow as a result of continued submarine erosion and sedimentation. In the case of sunken ship "No. 7 Haeseong", the partial collapse of the bow was revealed in the seabed images captured in 2015, though it had still been intact in images captured during the Korea Hydrographic and Oceanographic Agency's investigation in 2011. This partial collapse was presumed to have resulted from the effects of continued tidal currents, the cargo load of the ship and continued corrosion of the ship over a long time on the seabed. Continuous monitoring of residual fuel inside the ship is necessary to avoid leakage and potential marine pollution. By conducting image analysis on these sunken ships, it has been determined that the structural safety of the ships is seriously influenced by tidal currents and seafloor topography, while the hulls will be continuously changed by corrosion. As a result, it can be concluded that the development of prediction and response techniques that take into consideration residual fuel leakage and environmental changes according to the geological characteristics of sunken ships is necessary.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.4
• /
• pp.72-83
• /
• 1997

The purpose of present study is to find an appropriate hull shape of a container ship which can operate along the coast and through canals. A 200TEU class container ship is designed with dimensional modifications of an existing 140TEU container ship which is a domestic coastwise vessel. For the fore-body shape including bulbous bow. additional modification is done by changing the sectional area curve and frameline shape using the data of series resistance test. The model tests are performed in the towing tank to measure total resistance sinkage and trim of the model. And a finite-difference method based on MAC method is utilized to analyze the flow field around the ships in deep and restricted water. From the result of model test and numerical analysis, the resistance characteristics of the designed hull form are predicted.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.1
• /
• pp.78-84
• /
• 2013

The primary objective of the current work is to develop efficient numerical code to assess the resistance performance of the twin hull form. Resistance performance for the two different twin hull forms with asymmetric and symmetric mono hull using developed code are evaluated. Numerical calculations and model tests have been compared to validate a developed code used in the current work. Comparison were carried out through sinkages of the bow and stern, trim angle and wave-making resistance. Comparative analysis regarding hydrodynamic characteristic of different twin hull forms is worthy of application in the hull form development stage.