• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.2
• /
• pp.295-300
• /
• 2010

Inconel 718 alloy, widely used as material of aircraft engine, has a good mechanical property in high temperature, strong anti-oxidation characteristics in oxidated current over $900^{\circ}C$, and also is not easily digested in the air containing sulfur, therefore, its usage as mechanical component is expanding rapidly. Even though Inconel alloy 718 is difficult to machine, it requires highly precise processing/machining to sustain its component quality of high accuracy. In this paper, general turning operation conditions arc tested to select the best cutting process condition by measuring surface roughness through implementing experiments with orthogonal array of cutting speed, feeding speed and cutting depth as processing parameters based on the Taguchi method. Optimal turning operation conditions are extracted from the proposed experimental models.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.1
• /
• pp.69-77
• /
• 1993

Adaptive Control is applied to regulate cutting force in turning operation under varying cutting conditions. Regulation is achieved primarily by adjusting feedrate. Such control leads to better machine utilization and increased tool life. The modeling of adaptive control system in turning operation is presented. The experimental results show that the adaptive PI controller is stable and performs more effective force control over wide range of cutting conditions as compared with the fixed gain PI controller.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.141-142
• /
• 2007

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.4
• /
• pp.57-63
• /
• 2011

The aim of this study is to analyze turning process using commercial FEM simulation code. Various simulation models of orthogonal cutting process for 3 layers of metallic material have been simulated and analyzed. The workpiece material used for the orthogonal plane-strain metal cutting simulation consists of three layers, which are Allow Tool Steel, Aluminum and Stainless Steel. The finite element model is composed of a deformable workpiece and a rigid tool. The tool penetrates through the workpiece at a constant speed and constant feed rate. As an analytical result, detailed cutting temperature, strain, pressure, residual stress for both a tool and each layer of workpiece were obtained during the turning process. It has been closely observed that the chip flow curve deforms continuously.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.151-154
• /
• 1993

지동 및 음향분야의 발달과 더불어 가청주파수 이상의 초음파에대한 연구가 여러분야에 걸쳐 다양하게 많은 학 자들에 의해진전되어 왔다. 이중에서 실용적인 초음파 장치가 처음으로 등장한 것은 1921년경 프랑스의 랑지방 (P. Langevin)에 의해 만들어진 초음파측심기라고 전해지고 있다. 당시 사용된 진동자는 두 장의 금속원판 사이에 수정을 샌드위치 형태로 만든것으로써 랑지방형 진동자라고 한다. 최근 각종기계의 경량화, 고도화, 고성능화가 요구 되면서 고인성, 고내열성, 고경도 등의 특성을 갖는 재료를 가공함에 있어서 저동력 및 고정밀도가 요구되고 있다. 본 연구에서는 선삭가공에서 초음파발생기에서 보낸 초음파신호를 초음파 진동혼의 설계에 의한 진폭을 증가시켜 사각형 단면을 갖는 양단자유지지 굽힘진동 공구홀더의 공진조건을 초음파 진동절삭 가공시스템에 적용시키는데 목표를 두며 또한 초음파 진동절삭을 적용시켰을 때의 절삭 특성을 규명하기 위하여 선정된 절삭조건으로 선삭할 때 발생하는 절삭분 력 및 표면거칠기를 측정하고 분석하여 그 결과로부터 절삭특성을 해석코자 본 연구를 수행하였다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.19-24
• /
• 2003

Recently, various efforts to make more speedy and precision machine tool to improve productivity and also various efforts to solve environmental problem are going on, so that dry cutting in manufacturing industry, which needs environmental conscious design and development of manufacturing technique, is becoming a very important assignment to solve. Because dry cutting does not use cutting fluid, we need other methods that can be used instead of cutting fluid, which does cooling, lubricating, chip washing, and anti-corrosion. Especially, because turning is a continuous work, the consideration of tool life and surface roughness due to continuous heat and poor lubrication is important. The purposes of this paper are the consideration of how well the compressed air can work instead of cutting fluid, and also the development of the method to select the optimum machining condition by the minimum numbers of experiments through the Taguchi method.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.6
• /
• pp.27-32
• /
• 2011

In recently, it is demanded development of manufacturing techniques for machining of various mechanical parts. Therefore the development of turning is one of the important manufacturing techniques. In this study, an experimental shape in tapered groove turning was suggested, and the turning process was investigated by analyzing cutting speed, feed rate, tapered angle, depth of cut. The surface roughness and cutting force change in the workpiece was measured. From the results, the optimum machining conditions are obtained by design of experiments.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.23-27
• /
• 1992

종래부터 공작기계의 성능은 그 공작기계가 발휘하는 가공정도와 가공능률이라고 하는 막연한 개념으로 취급되어 왔으나, 최근 가공정도나 가공능률을 저해하는 제현상, 예를 들면 채터나 열변형 등에 관한 정력적인 연구가 진행되면서 이들이 발생기구가 명확히 됨과 동시에 이들 제현상의 발생한계로부터 가공성능을 정량적으로 평가 해왔다. 그러나 연구보고라는 말의 성격상 연구의 대부분이 특정 현상이나 요소에 대하여 기술한 것이기 때문에 제 현상을 총괄하여 공작기계의 성능을 체계화한 것이라고볼 수는 없다. 여기서 공작물의 물림조건에서 발생 되고 있는 여러가지 문제점 중에서 척킹(chucking)된 공작물의 물림강성이 채터 진동의안정한계, 즉 가공한계에 미치는 영향에 대해서는 선삭가공에서 척 가공방식이 일반적으로 널리사용되고 있다는 점을 감안할 때 매우 중요한 과제이다. 그 중에서도 척에 물린 공작물의 경우에는 절삭저항의 작용위치와 죠의상대적인 위치에 의한 공작물 강성의 변화가 가공정도에 커다란 영향을 미친다는 것이 오래 전부터 지적되고있느 사항 중의 하나이다. 따라서 척-공작물계의 동적인 특성이 절삭현상에 미치는 영향에 대하여 동적인 관점에서 검토할 필요가 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.940-946
• /
• 2015

The turning clearance angle changes the machining characteristics. In this study, three workpiece materials, machine structural carbon steel, chrome-molybdenum steel and stainless steel, were examined. The experiments revealed how the features of selected materials changed when they were processed with machining operation. To find the surface roughness of workpiece materials, the workpiece materials, which have a higher tensile strength, showed a much better surface roughness in the surface roughness tester. Moreover, the process feed rate was compared between 0.07 mm/rev and 0.10 mm/rev. When the process feed rate was 0.07 mm/rev, the surface roughness has superior results without reference to the quality of the materials. According to this research on the turning clearance angle, the best roughness value was observed when the quality of the materials were $0.9^{\circ}$, whereas the worst roughness was observed when quality of the materials was $0.3^{\circ}$.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1992.04b
• /
• pp.237-246
• /
• 1992

본 연구는 선삭공정에서 CAD 인터페이스된 자동공정계획시스템개발에 관한 연구의 계속으로 작업준비계획(Setup Planning)을 자동적으로 수행하는 기법을 개발함이 주된 목적이다. 연구의 대상은 기계가공부품들 중 많은 비중을 차지하는 NC선반가공용 회전형상부품을 대상으로 하였다. 연구의 내용은 공작물고정방법의 결정, 작업준비횟수의 결정, 클램핑(Clamping)면 및 공작물고정구의 선정에 관한 기법과 알고리즘을 개발하였으며, 소프트웨어는 개인용 컴퓨터를 이용하여 Turbo-C(Version 2.0)를 사용하여 개발하였고, 사례연구를 통하여 개발된 시스템의 유효성을 평가하였다.