• Journal of Korea Ship Safrty Technology Authority
• /
• s.29
• /
• pp.26-41
• /
• 2010

본 연구에서는 쌍동선 연결부의 횡강도와 관련하여 국내기준 및 국제표준, 선급 기준의 관련 내용을 조사하고 각 하중에 대한 계산식 및 관련 계수들에 영향을 미치는 외력 등을 비교 분석하며 샘플선박에 대한 구조계산 및 해석을 수행하여 국내에 적합한 쌍동선 연결부의 횡강도 구조안전성 평가기준을 제시하고 국제표준에 대한 대응방안을 마련하고자 한다.

• Journal of Navigation and Port Research
• /
• v.37 no.4
• /
• pp.345-350
• /
• 2013

It is well known that the hydrodynamic forces and moments induced by the proximity of bank in confined waters, such as in a harbour or narrow channel affect ship's maneuvering motion. In this paper, the calculation method based on the slender body theory for estimation of the hydrodynamic force between ship and breakwater is applied, and also, the characteristic features of hydrodynamic force acting on a large vessel in the proximity of a breakwater are described and illustrated. Furthermore, the effects of water depth and the lateral spacing between ship and breakwater are summarized and discussed.

• Journal of Navigation and Port Research
• /
• v.38 no.5
• /
• pp.463-470
• /
• 2014

In this paper, calculation of towing force required to tow the ship and experiments to verify its appropriacy are discussed. Friction, wind and wave-making resistance of vessel are considered to calculate towing force of specified vessel. Propeller resistance is also reflected and it is assumed that the propellers are locked. Node analysis to estimate additional resistance on towline is applied. Total towing force could be obtained by adding the ship's resistance and towline resistance. Experiments with training ship SAE YU DAL was executed to check the effectiveness of calculation methods and some comparison between experiments and calculation results was also done. From the comparative analysis, we confirmed that towing speed is primary terms in the calculation of towing force and propeller resistance is a major elements of ship's resistance with the increasing of towing speed. We can see that additional resistance induced by yawing of ship during towing have to be considered for total tow resistance.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.284-285
• /
• 2018

본 연구에서는 VTSO 관점에서 선박 충돌위험도 평가모델(CoRi)을 이용하여 부산항 관제구역내에서 발생한 일반 상선간 준사고 사례에 대한 충돌 위험도와 선종과 선박의 크기를 소형선박(유선 도선 어선 등)으로 가정할 경우 계산된 충돌 위험도를 비교함으로써 VTSO가 일반 상선과 다른 운항 특성을 가진 소형선박의 모니터링 및 충돌 위험 판단의 어려움을 수치적으로 분석 연구고자 한다.

• Journal of the Korea Society for Simulation
• /
• v.19 no.3
• /
• pp.17-25
• /
• 2010

It is necessary for the ship dynamic models to realize ship dynamics and to achieve the real-time analysis in the manoeuvring simulation. Generally, simple dynamic models, such as 1st-order differential equation models of turning angle, turning rate, and forward speed, are used in the manoeuvring simulation for multiple ships. Ship dynamic modeling and parameter estimation methods based on its turning test results are proposed in this paper. Parameter estimation methods for the constant speed model and the speed-changing model are mathematically developed and verified by comparing with turning test results of a real ship.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.857-862
• /
• 2023

In order for an autonomous ship to arrive near the pier and automatically berth without the help of a tugboat or pilot, it is necessary to recognize the pier and calculate the thruster output and output angle for berthing to the pier at a fixed berthing speed under given external force conditions. Therefore, in this study, the external force and moment acting on the ship while berthing were analyzed, and the thruster output calculation for automatic berthing was designed and the basic concept for the development of the automatic berthing program was designed. The wind pressure applied to the hull by the wind while the ship is berthing was calculated based on the wind pressure area and the wind direction angle and the turning moment to rotate the ship according to the transverse force of the ship was calculated. Considering the force acting on the ship and the turning moment during berthing, a theoretical formula was presented to calculate the thruster output and output angle for berthing parallel to the pier, and the turning due to other variables was controlled by the PID controller. In addition, the basic concept for program development was presented by analyzing the input elements necessary for the theoretical formula.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.1 no.1
• /
• pp.81-86
• /
• 1989

Herein the surge-heave-pitch motion of a ship has been analyzed within the framework of linear potential theory. The ship is assumed slender weakly moored along the centerline of a rectangular harbor with constant depth and straight coastline. The method of matched asymptotic expansion is us-ed to obtain the leading-order solution. The ship and harbor responses to incident long waves can be re-presented in terms of Green's function, which is the solution of the Helmholtz equation satisfying necessary boundary conditions. Numerical results clearly indicate the importance of the surge motion.

• Journal of Navigation and Port Research
• /
• v.28 no.6
• /
• pp.475-480
• /
• 2004

Author presented some study with regard to “automatic control for ship collision avoidance system” before. Those papers are to deal with unsolved problem,; in the previous study. In this paper, two issues relating to ship collision avoidance were investigated. One is to suggest a new algorithm of avoidance of a group ship. This algorithm is useful when a ship takes avoiding action for a group fish boats and a group of merchant vessels. In the stage of taking avoidance action, newly-developed algorithm was used. the other is to develop a unified model of collision risk. Generally collision risk changes according to various type of encounters. The new model is to take into account of these situations. The above-mentioned algorithm and model were verified through simulation under various encounters between ships.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.33
• /
• pp.12-31
• /
• 2012

수치 계산으로 고속 활주선의 저항 성능을 평가하기 위해서는 활주 상태에서의 항주자세 예측이 무엇보다도 중요하다고 할 수 있다. 항주자세의 변화가 큰 고속 활주선의 경우에는 활주 자세에 따라 선저 바닥면에서 나타나는 압력 변화에 의한 동적 부양력 변화가 크므로 단순히 정지 중 흘수를 기준으로 계산되어진 유체력으로 항주자세를 예측하기 보다는 자세 변화에 따른 동적 부양력의 변화와 이에 의한 자세 변화를 반복 계산을 통해 수렴시키는 것이 요구되어진다. 본 연구에서는 선형화된 자유수면 조건의 포텐셜 수치 계산으로 유체 동압력인 부양력을 계산해내고 이를 유체 정역학적 힘으로 간주하여 부력과 선체중량과의 힘과 트림 모멘트 평형 관계를 만족시키는 방법으로 반복적인 계산을 통해 수렴된 활주 자세를 얻어내었다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.11a
• /
• pp.29-30
• /
• 2011

본 연구에서는 부산항 신항 선박급유 및 유류중계기지 건립에 따른 JETTY 평면재배치 검토로 인하여 발생되어지는 부산항 신항에 입항하는 대형 컨테이너 선박이 계류중인 선박에 작용하는 간섭력을 수치적으로 계산하고, 계류중인 선박의 안전 및 유류중계기지 건립 안전에 유의해야 할 점 등에 관하여 검토한다.