• Journal of Navigation and Port Research
• /
• v.41 no.3
• /
• pp.79-86
• /
• 2017

Ballast water filled into and discharged from the ballast tank of a ship has a negative impact on local marine environment due to various aquatic organisms contained therein. The IMO developed and adopted "The International Convention for the Control and Management of Ships Ballast Water and Sediments, 2004" with the purpose of protecting the marine environment from transfer of harmful aquatic organisms in ballast water carried by ships. The IMO BWM Convention was approved in September 2016 and ships must be equipped with ballast water management system after September 2017. Ships' ballast water treatment methods are divided into using active substances as electrolytic type, ozone type, chemical dosing type and using physical treatment type as filter type, ultraviolet type. It is also used with a combination of two methods. Electrolysis is superior in terms of cost and efficiency. In this study, basic principles, components, and land base test contents of electrolysis ballast water treatment system, a direct electrolyzed ballast water treatment system, were examined. Land base test was conducted with 300m3/h capacity device at the KIOST Geoje plant where the government test facility was installed. This test validated that the system meets IMO standards.

• Journal of Navigation and Port Research
• /
• v.32 no.3
• /
• pp.229-235
• /
• 2008

This paper was provided to apply the ITC-Hulls Clauses & ISM Code for the accident of sunken ship which was occurred by seamen's barratry. For the causes of the sunken accident, the underwriter insisted toot shipowner submerged the vessel intentionally for the purpose of the insured amounts, while shipowner protests toot the ship was submerged because of crews faults. In this connection, the judge sentenced toot this accident was caused by humans errors as the Provisions of 6.2.4 of ITC-Hulls, however shipowner is responsible for hiring onboard qualified seafarers and carrying out the due diligence for performing ISM Code for ensuring ship's safety and seaworthiness.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.3
• /
• pp.220-226
• /
• 2003

This paper presents the result of an investigation on the application of the acoustic emission method to the monitoring of fatigue crack initiation, growth and track location in welded joints. Fatigue test was carried out for a typical fillet welded joint of ship structure. AE parameter such as ring down count was analyzed in time domain and crack locations were examined by source location and cluster option which is one of the functions of AE signal processor The usability of AE mettled was confirmed for the detection of the initiation and location of through crack.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.3
• /
• pp.497-502
• /
• 2018

An analog to digital converter(: ADC) has been designed to extract video signals of marine X-band radar and convert to digital signals in order to produce rainfall information. X-band weather radars are suitable for high temporal-spatial resolution observations of rainfall over local ranges but they are very expensive and require professional management. The marine radars with 10-2 cost facilitate data collection and management as well as economic benefits. To validate the usefulness of the developed ADC, comparative observations were made with weather radar for short term precipitation cases. The rainfall distribution of marine radar observations are consistent with that of weather radar within a radius of 15 km. This demonstrates the usability of marine radar for rainfall observations.

• The KIPS Transactions:PartA
• /
• v.17A no.2
• /
• pp.81-92
• /
• 2010

There has been some research in the equipment defect detection based on vibration information. Most research of them is based on vibration monitoring to determine the equipment defect or not. In this paper, we introduce more accurate system for engine defect detection based on vibration information and we focus on detection of engine defect for boat and system control. First, it uses the duplicated-checking method for vibration information to determine the engine defect or not. If there is a defect happened, we use the method using error part of vibration information basis with error range to determine which kind of error is happened. On the other hand, we use the engine trend analysis and standard of safety engine to implement the vibration information database. Our simulation results show that the probability of engine defect determination is 100% and the probability of engine defect classification and detection is 96%.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.6
• /
• pp.744-750
• /
• 2015

In this paper, development of mobile robot for the inspection of hull surface was mentioned. In the sea, it is difficult to proceed with the visual inspection of hull side and thus mobile robot for checking the status could be run with strap-on its surface. To do this, permanent magnet module to generate magnetic force between hull surface and mobile robot, and structure to minimize variance of the force under curvature circumstance were considered on the design. Based on the design, mobile robot with four NdFeB, four driving wheels and image aquisition module was applied. Load experiment to check the adhesive force, slip test during stop state and driving test to measure driving speed were executed. From the experiments 13 Kgf adhesive force was obtained and slip was not happened until 8 Kgf load on the inclined plate. Driving speed of mobile robot was measured at 0.82 m/s corresponding to 6.5 ampere. We confirmed the effectiveness of developed mobile robot by experiments to check its characteristics.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.32 no.4
• /
• pp.64-67
• /
• 1995

우리나라 조선산업이 21세기에 명실상부한 선진 조선국으로 발돋움하기 위해서는 단기적으로는 가격경쟁력의 강화가 요구되나 장기적으로는 기술자립화를 통해 과거 가격위주의 경쟁체제에서 기술위주의 경쟁체제로 전환함으로써 질적인 성장을 추구해야 할 것이다. 또한 우리나라의 조 선산업은 세계조선시장을 리드하는 선도국으로서 세계선박수급구조의 안정화에 노력하고 지구 해양환경보호를 위한 국제적인 프로그램에 적극 참여하는 한편, 후발조선국에 대한 기술협력, 기술지도 등 국제협력도 강화하여 명실상부한 선진조선국의 면모를 갖추어야 할 것이다. 이를 효과적으로 추진하기 위해서는 다음과 같은 과제를 해결해야 할 것이다. 첫째, 효율적 기술개발을 통한 건조기술의 재고가 그 무엇보다도 중요하다. 즉 단기적으로는 주요 대체수요 선박이면서 국내 주력건조선박인 탱커, 벌크케리어 등 재래단순형 선박에 대해 성에 너지화, 성인력화 및 표준선형화하고, 선박 생산공정의 개선, 생산성 향상을 통해 가격경쟁력을 지속적으로 확보해야할 것이다. 그러나 중장기적으로는 가스운반선,카페리선, 초고속선 등의 부가가치선박에 대한 건 조기술의 자립화로 이들 선종을 주력선종화하여 해외 수주 경쟁력을 재고시켜야 한다. 이와함께 심해탐사장비, 해양구조부유물 등의 해양개발장비의 개발로 사업영역을 확대해야할 것이다. 상 기의 각종 기술재발을 효율적으로 추진하기 위해서는 범국가적인 연구체제의 구성을 통한 산학연 공동연구형태로 추진하는 것이 바람직하다. 둘째, 핵심 조선기자재의 국산화와 품질 향상이 필 요하다. 향후 조선기자재의 국산화추진은 과거 개발 품목의 확대에서 벗어나 핵심적이고 부가 가치가 높은 품목 위주의 질적 국산화로 전환되어야 할 것이며, 이때 국산화이후 조선소의 적 극적인 구매가 전제되어야 할 것이다. 또한 기자재의 품질, 성능검사기능의 강화와 다수요 품목을 중심으로한 표준화, 규격화의 확대 추진으로 지속적인 품질향상과 원가절감을 도모해야한다. 특히 조선기자재업체의 영세상을 감안하여 조선소 인근지역에 단지화함으로써 생산설비의 현 대화, 자재의 공동구매, 물류비용의 절감 등을 기해 가격경쟁력을 강화해야 할 것이다. 또한 업계 공동의 해외판매망, A/S망의 직수출을 늘려야 할 것이다. 셋째, 국제협력 강화로 통상환경에 적극 대응해야 한다. 다자간조선협정 발효에 따른 제소 가능성에 대비하여 관민차원의 국제협 력을 강화하는 한편, 회계 기준의 통일, 제소사례의 연구 등을 업계 공동으로 추진하는 것이 바 람직하다. 또한 향후 2010년이후에 중국을 비롯한 후발조선국에 대해 조선협정에의 참여를 유도, 세계조선시장의 수급안정화에 노력해야할 것이다. 그외에 국제적으로 추진되는 지구그린화에 주도적 역할을 수행해야 할 것이다. 넷째, 선박금융제도의 개선과 신금융상품의 개발이 요구된다. 내수 수요인 계획조선의 지원조건을 개선하고 연불수출자금을 BBC자금으로 활용토록하여 국내 선주들의 신조를 유도해야 할 것이다. 그 외에 향후 금융개방화에 맞추어 해외자금을 활용한 리스금융, 상사금융 등의 민간신용제도를 더욱 활성화하고 선진국의 선박금융기법에 대한 연구 및 도입 등 선주들에게 다양한 선박건조자금을 제공하여 내수기반 확충에도 노력해야 할 것 이다.

• The Journal of Bigdata
• /
• v.7 no.1
• /
• pp.125-137
• /
• 2022

The transportation industry is one of the important industries due to the geographical requirements surrounded by the sea on three sides of Korea and the problem of resource poverty, which relies on imports for most of its resource consumption. Among them, the proportion of the shipping industry is large enough to account for most of the transportation industry, and maintenance in the shipping industry is also important in improving the operational efficiency and reducing costs of ships. However, currently, inspections are conducted every certain period of time for maintenance of ships, resulting in time and cost, and the cause is not properly identified. Therefore, in this study, the proposed methodology, LSTM-AutoEncoder, is used to detect abnormalities that may cause ship failure by considering the time of actual ship operation data. In addition, clustering is performed through clustering, and the potential causes of ship main engine failure are identified by grouping outlier by factor. This enables faster monitoring of various information on the ship and identifies the degree of abnormality. In addition, the current ship's fault monitoring system will be equipped with a concrete alarm point setting and a fault diagnosis system, and it will be able to help find the maintenance time.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.31
• /
• pp.81-96
• /
• 2011

The transportation of oil has increased due to the growth of marine industries and oil refineries. Oil residues and waste discharged to the ocean has increased due to accidental and/or intentional discharges. The International Marine Organization(IMO) has made compulsory that every oil tanker of 150 gross tonnage and above and every ship of 400 gross tonnages other than tankers and above should be provided with an oil record book. The entries in the oil record book should be made in accordance with the IMO guidelines. Specifically, engine room generated oil residues should be recorded in the oil record book from January 1, 2011. Also, the developed IMO guideline should be added for the prevention of dispute with the Port State Control Officers and(or) Tanker Vetting Inspectors. This oil record book will be in operation and of valued assistance to the marine officers, according to the IMO policy for the prevention of the waste oil and the oil mixtures from the machinery space. For the convenience, added Code & Item No. list, FAQs and reviewed and revised Examples.

• Journal of Power System Engineering
• /
• v.3 no.4
• /
• pp.51-56
• /
• 1999

The ultrasonic method, which is well known as nondestructive test method, is widely used to evaluate the material damage due to degradation. However, this method is just used for measuring the crack size and the thickness loss of the tube. The purpose of this study is to investigate the applicability of the ultrasonic technique for the evaluation of marine diesel engine exhaust valve and to suggest the correlations between the ultrasonic characteristics and valve degradation. From the evaluation of the results obtained, the technique of using the ultrasonic property was founds to be a efficient method to evaluate the degree of marine diesel engine exhaust valve by nondestructive test.