• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.10a
• /
• pp.331-332
• /
• 2014

최근 해양 분야에서는 해상과 육상의 다양한 데이터를 통합, 활용하여 해상에서의 선박의 안전 운항, 해양 환경 및 자원의 보호 등의 활동에 필요한 정보를 적시에 제공하는 정보 서비스 체계로 e-Navigation에 대한 관심이 높아지고 있다. 국제해사기구(IMO)를 비롯한 해양 분야 국제기구 등은 e-Navigation을 위한 정책, 표준, 관련 기술 및 시스템 개발 등 e-Navigation을 주도하기 위한 많은 노력을 기울이고 있다. UN산하 해사안전 분야 전문기구인 국제해사기구(IMO)는 인적과실에 의한 해양사고를 줄이기 위해 2006년 e-Navigation 도입을 결정, 2018년부터 시행하기 위해 국제협약 제 개정 등을 추진하고 있다. 해양수산부는 국제해상안전 규제동향에 선제적으로 대응함으로써 해양안전을 강화하는 한편, 관련 분야 신산업 육성과 일자리 창출 등을 목표로 하는 "한국형 e-Navigation 대응전략"을 발표하였다. 항로표지는 해상에서의 안전한 활동을 지원하는 필수 시설로써 e-Navigation 시스템의 중요한 운영자원으로 활용될 예정이며 이에 국내에서도 e-Navigation 시스템 운영을 위한 항로표지시설에 대한 기술 개발이 절실한 실정이다. 이러한 항로표지를 이용한 한국형 e-Navigation 운영을 위한 발전 방안에 대하여 기술하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.193-195
• /
• 2015

해양사고 원인의 70 % 이상을 차지하는 인적오류 예방은 해양안전에 가장 중요한 이슈이다. 인적오류는 확률기반의 인적 모델을 구축하여 평가함으로써 예상되는 위기의 수준을 과학적으로 예측할 수 있다. 확률기반 인적 모델을 구축하기 위해서는 사건의 원인과 결과 사이에 연계성을 갖고 있는 통계 데이터가 필요하다. 본 연구에서는 이러한 연계 데이터 확보를 위한 것으로, 해양안전심판원의 통계 데이터 사이의 연계성 확보 방안을 주로 검토하였다. 그리고 이러한 통계 데이터를 인적 모델에 적용하는 방법과 전략도 검토하였다. 인적 모델은 회사, 선박, 해기사 관련 요소들이 총체적으로 반영될 필요가 있음을 알았고, 이러한 세 가지 요소로 구성된 통합 모델을 설계하기 위한 방안도 검토하였다. 특히, 각 요소들에 포함될 데이터 사이의 연계성 확보를 위해서 해양사고 연계 체인(Chain)을 도입하였다. 확보한 데이터는 사고의 가장 근본원인인 Hazard부터 사고의 영향을 나타내는 Impact까지의 6 단계 분석 방법을 적용하여 통계 데이터에 결합되어 있는 원인과 결과 사이의 연계성을 확보할 수 있는 방안을 수립하였다. 본 연구는 중장기적으로 추진할 과제이기 때문에 향후 본 연구 내용을 토대로 인적 모델을 개발하여 해양사고 예방에 적극 기여하고자 한다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.4
• /
• pp.351-355
• /
• 2015

This paper explained the application of a lithium-ion battery energy storage system to electric propulsion ships. The power distribution in electric propulsion ships has low power quality because of the variation in the power consumption of the propulsion motor. For proper operation of the ship, the power quality needs to be improved, and the battery energy storage system is used to solve power-quality problems. The simulation models of electric propulsion ship and battery energy storage systems are constructed on MATLAB/Simulink to verify the improvement in power quality. The proposed system is applied in various scenarios of the propulsion motor state. The power quality achieved by using the battery energy storage system in both voltage and frequency satisfies the standards set by IEC-60092/101.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.1
• /
• pp.8-14
• /
• 2011

RIB(Rigid Inflatable Boat) is widely used for coastal transportation in the commercial use and for ISR(Intelligence, Surveillance, Reconnaissance) in the military use. Since RIB is around 10 meters in length and over 30 knots in speed, its motion characteristics in waves is quite different from a large scale ship. When it turns, large roll occurs and heeling direction is opposite to the large ship's case. Currently, many countries are developing USV(Unmanned Surface Vehicle) of which type is RIB. In order to develop high performance autopilot and way point controller, it is very important to identify RIB's motion characteristics. In this paper, sea trial test results of a 7-meter RIB such as speed, turning, zig-zag, and way point control tests were represented and its resistance and propulsion model was identified by using sea trial data and Savitsky's formula. In addition, the state space model which will be used in the identification of the four-degree-of-freedom dynamics in the next step was formulated and the identification procedure was proposed.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.947-948
• /
• 2007

A superconducting synchronous motor with rotating field coil has been designed. This rotating field coil is composed of high-temperature superconducting(HTS) wire but the stationary armature windings are composed of conventional copper wire. In this paper a 5MW class synchronous motor with rotating HTS coil is designed. This motor is aimed to be utilized for ship propulsion so it has very low-speed. Firstly an air-cored type has been designed, which does not have any iron core both at the field and at the armature teeth. Secondly several iron-cored rotor types are considered to reduce expensive HTS wire cost.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.6
• /
• pp.325-331
• /
• 2022

Hydrogen embrittlement in metals has been a serious issue with regard to structural safety. In this study, molecular dynamics simulations revealed that the aggregation of hydrogen atoms at the crack tips suppresses the dislocation emission and thus results in cleavage fracture. A series of molecular dynamics simulations were performed considering factors such as the concentration of hydrogen atoms, loading rate, and diffusion coefficient. We investigated the conditions that minimize hydrogen embrittlement. The simulation results were consistent with the experimental results and used to quantify hydrogen embrittlement.

• Journal of the Korean institute of surface engineering
• /
• v.57 no.1
• /
• pp.49-56
• /
• 2024

Superhydrophobic surfaces have been expected to be able to provide considerable performance improvements and introduce innovative functions across diverse industries. However, representative methods for fabricating superhydrophobic surfaces include etching the substrate or attaching nanosized particles, but they have been limited by problems such as applicability to only a few materials or low adhesion between particles and substrates, resulting in a short lifetime of superhydrophobic properties. In this work, we report a novel coating technique that can achieve superhydrophobicity by electrophoretic deposition of aluminum nitride (AlN) nanopowders and their self-bonding to form a surface structure without the use of binder resins through a hydrolysis reaction. Furthermore, by using a water-soluble adhesive as a temporary shield for the electrophoretic deposited AlN powders, hierarchical aluminum hydroxide structures can be strongly adhered to a variety of electrically conductive substrates. This binder-free technique for creating hierarchical structures that exhibit strong adhesion to a variety of substrates significantly expands the practical applicability of superhydrophobic surfaces.

• Journal of Service Research and Studies
• /
• v.6 no.2
• /
• pp.23-35
• /
• 2016

Firms should seek greater profits and corporate growth through new businesses. New businesses contribute realizing creative economy that creates good jobs, and expanding the company by securing new markets and creating new profits and growth. However, new business is risky management decision-making to have a high failure rate because it involves the adaptation of new business environment and the burden of new investments, including the uncertainty of success in business. Therefore, innovation strategies play important roles for the new business entry, using product innovation, process innovation, business model innovation, disruptive innovation, and strategic innovation, etc. and company will get huge economic results by pushing them into successful business. It is essential that innovation strategy and IT development strategy along with business strategy of a firm are linked, and their strategic alignment is considered to be a critical success factor for new business success. Hyundai Heavy Industries(HHI) pursued marine engine business for the development of precision machinery industry and shipbuilding industry of Korea, and the company recognized the importance of new business strategy, innovation strategy, and IT strategy inter-linked, and pushed strategic alignment boldly. As a result, HHI won the competition in European and Japanese engine manufacturers and climbed into the world's largest engine manufacturer. This study suggests investigating and analyzing a case that HHI succeeded in marine engine business expansion using strategic innovation strategy as a way of the introduction of CNC machine tools and the development of HEMAPT system.

• Journal of Navigation and Port Research
• /
• v.44 no.4
• /
• pp.283-290
• /
• 2020

BOG (Boil Off Gas) generation is unavoidable in the liquefied hydrogen carrier, and proper measures are necessary to prevent pressure problems inside the cargo tank. The BOG can be used as propulsion fuel for ships, and the remaining parts used for propulsion must be effectively managed, such as in the form of reliquefying or burning. This study proposes an BOG reliquefaction system optimized for a 160,000 m3 liquefied hydrogen carrier with a hydrogen propulsion system. The system comprises a hydrogen compression and helium refrigerant section, and increases the efficiency by effectively using the cold energy of the BOG discharged from the cargo tank. In this study, the system was evaluated through the exergy efficiency and SEC (Specific Energy Consumption) analysis according to the rate of the reliquefaction of the BOG while the hydrogen BOG with a supply temperature of -220℃ entered the reliquefaction system. As a result, it showed SEC of 4.11 kWh/kgLH2 and exergy efficiency of 60.1% at the rate of reliquefaction of 20%. And the parametric study of the effects of varying the hydrogen compression pressure, inlet temperature of the hydrogen expander, and the feed hydrogen temperature was conducted.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.40-51
• /
• 1991

A Propeller design method using the newly developed blade section(KH18), which behaves better cavitation characteristics, is presented. Experimental results for two-dimensional foil sections show that the lift-drag curve and the cavitation-free bucket diagram of the new blade section are wider comparing to those of the existion NACA sections. This characteristic of the new section is particularly important for marine propeller applications since angle of attack variation of the propeller blade operating behind a non-uniform ship's wake is relatively large. A lifting surface theory is used for the design of a propeller with the developed section for a 2700 TEU container ship. Since the most suitable chordwise loading shape is not known a priori, chordwise loading shape is chosen as a design parameter. Five propellers with different chordwise loading shapes and different foil sections are designed and tested in the towing tank and cavitation tunnel at KRISO. It is observed by a series of extensive model tsets that the propeller(KP197) having the chordwise loading shape, which has less leading edge loading at the inner radii and more leading edge loading at the outer radii of 0.7 radius, has higher propulsive efficiency and better cavitation characteristics. The KP197 propeller shows 1% higher efficiency, 30% cavitation volume reduction and 9% reduction of fluctuating pressure level comparing to the propeller with an NACA section. More appreciable efficiency gain for the new blade section propeller would be expected by reduction of expanded blade area considering the better cavitation characteristics of the new blade section.