• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.1
• /
• pp.44-54
• /
• 2023

In this study, the second-order Nomoto's nonlinear expansion model was implemented as a Tagaki-Sugeno fuzzy model based on the heading angular velocity to design the automatic steering system of a ship considering nonlinear elements. A Tagaki-Sugeno fuzzy PID controller was designed using the applied fuzzy membership functions from the Tagaki-Sugeno fuzzy model. The linear models and fuzzy membership functions of each operating point of a given nonlinear expansion model were simultaneously tuned using a genetic algorithm. It was confirmed that the implemented Tagaki-Sugeno fuzzy model could accurately describe the given nonlinear expansion model through the Zig-Zag experiment. The optimal parameters of the sub-PID controller for each operating point of the Tagaki-Sugeno fuzzy model were searched using a genetic algorithm. The evaluation function for searching the optimal parameters considered the route extension due to course deviation and the resistance component of the ship by steering. By adding a penalty function to the evaluation function, the performance of the automatic steering system of the ship could be evaluated to track the set course without overshooting when changing the course. It was confirmed that the sub-PID controller for each operating point followed the set course to minimize the evaluation function without overshoot when changing the course. The outputs of the tuned sub-PID controllers were combined in a weighted average method using the membership functions of the Tagaki-Sugeno fuzzy model. The proposed Tagaki-Sugeno fuzzy PID controller was applied to the second-order Nomoto's nonlinear expansion model. As a result of examining the transient response characteristics for the set course change, it was confirmed that the set course tracking was satisfactorily performed.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.60 no.1
• /
• pp.71-79
• /
• 2024

In compliance with environmental regulations at sea and the introduction of unmanned autonomous ships, electric propulsion ships are garnering significant attention. Induction machines used as propulsion electric motor (PEM) have maintenance advantages, but speed control is very complicated and difficult. One of the most commonly used techniques for speed control is DTC (direct torque control). DTC is simple in the reference frame transformation and the stator flux calculation. Meanwhile, two-level and three-level voltage source inverters (VSI) are predominantly used. The three-level VSI has more flexibility in voltage space vector selection compared to the two-level VSI. In this paper, speed is controlled using the DTC method based on the specifications of the PEM. The speed controller employs a PI controller with anti-windup functionality. In addition, the characteristics of the two-level VSI and three-level VSI are compared under identical conditions. It was confirmed through simulation that proper control of speed and torque has been achieved. In particular, the torque ripple was small and control was possible with a low DC voltage at low speed in the three-level VSI. The study confirmed that the application of DTC, using a three-level VSI, contributes to enhancing the system's response performance.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.29 no.1
• /
• pp.56-76
• /
• 2024

We for the first time made a successful longest continuous sectional observation in the East Sea by an underwater glider during 95 days from September 18 to December 21 2020 in the Korea along the 106 Line (129.1 °E ~ 131.5 °E at 37.9 °N) of the regular shipboard measurements by the National Institute of Fishery Science (NIFS) and obtained twelve hydrographic sections with high spatiotemporal resolution. The glider was deployed at 129.1 °E in September 18 and conducted 88-days flight from September 19 to December 15 2020, yielding twelve hydrographic sections, and then recovered at 129.2 °E in December 21 after the last 6 days virtual mooring operation. During the total traveled distance of 2550 km, the estimated deviation from the predetermined zonal path had an average RMS distance of 262 m. Based on these high-resolution long-term glider measurements, we conducted a comparative study with the bi-monthly NIFS measurements in terms of spatial and temporal resolutions, and found distinguished features. One is that spatial features of sub-mesoscale such as sub-mesoscale frontal structure and intensified thermocline were detected only in the glider measurements, mainly due to glider's high spatial resolution. The other is the detection of intramonthly variations from the weekly time series of temperature and salinity, which were extracted from glider's continuous sections. Lastly, there were deviations and bias in measurements from both platforms. We argued these deviations in terms of the time scale of variation, the spatial scale of fixed-point observation, and the calibration status of CTD devices of both platforms.

• The Journal of Fisheries Business Administration
• /
• v.37 no.1 s.70
• /
• pp.121-142
• /
• 2006

EU는 당면과제인 과잉 어획능력을 해소하기 위해 공동어업정책하 어업구조정책의 하나로 '다년도지도프로그램(Multi Annual Guidance Programmes: MAGPs)'을 시행해 왔다. 지난 1983년부터 2002년까지 시행된 MAGP는 EU의 어업구조정책의 핵심 요소이다. 이러한MAGP는 최초 EU의 공공원조계획을 위한 체제의 하나로 입안되었으며, 그 목적은 어선 톤수와 마력수에 대한 각 회원국 어선의 능력을 동결하고자 하는 것이었다. 회원국들은 $4{\sim}5$년 주기로 각 국의 어선개발에 대한 정밀한 계획을 세워야하며, 어선의 용량(총톤수와 엔진출력)과 어획노력에 관한 목표들을 달성하도록 되어 있다. 이러한 감소 목표들은 독립된 과학적 조사결과에 따라 EU 위원회에 제안되고, 공동체 선박등록부에 의거 각국의 프로그램에 대한 적정 실현여부를 감시받고 있다. 또한 각 회원국들은 매년 4월 1일까지 EU위원회에 당해 MAGP의 실현에 대한 진도보고서를 제출하는 식으로 운영되어 왔다. 현재까지 4개의 MAGP가 시행되었다. 제1세대 MAGP(1983-1986년)는 회원국들에 강제적인 것은 아닌 관계로 별다른 성과가 없었으나, 공동체 어선들간의 어획능력 증가 경쟁에 대한 제어의 표현으로 의미가 있었다. 제2세대 MAGP(1987-1991년)에서는 처음으로 진출입 제어를 위한 매우 제한된 법규정이 만들어졌으며, 제3세대 MAGP(1992-1996년)에서는 공동체 어선 감소의 실제목표를 수여하는 첫 번째 계획이었다. 그리고 이 계획은 약 15%정도의 매 우 실질적인 어획능력 감소를 이루었다. 가장 최근에 끝난 4세대 MAGP(1997-2002)는 공동어업정책의 개혁 시간을 주기 위하여 1년 연장되었으며, 이 시스템은 만약 어선의 어획구성상 감소되는 어족자원의 비율이 낮으면 그 자원을 보호하고자 하는 것이었으나, 그 성과는 매우 낮았다. 이 4세대 계획의 또 다른 중요한 혁신은 회원국이 그들의 어선의 활동규제와 크기를 결합시키거나, 또는 전적으로 표본어선의 수익성 분석을 통해 어획능력을 제거하고자 하는 것이다. 그러나 이 역시 관리와 통제의 곤란으로 별 다른 성과를 거두지 못한 것으로 평가받고 있다. 그러나 많은 어려움과 제도상 불완전함에도 불구하고 MAGP는 일정한 효과를 거둔 것으로 보고되고 있다. 즉 어획능력은 지난 20년동안 전체적으로 25% 가량 감소하였으며, 특히 오래되고 비효율적인 어선에 대한 감척으로 어획능력 감소에 기여한 것으로 평가되고 있다. 이들 프로그램은 특히 보조금을 통해 어선의 제3국 영구이전과 낡고 비효율적인 어선의 신조를 가속화시킨 것으로 보고되고 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.597-606
• /
• 2020

Because the USV(Unmanned Surface Vehicle) is capable of remote control or autonomous navigation at sea, it can secure the superiority of combat power while minimizing human losses in a future combat environment. To plan the technology for the development of USV, the trend analysis of related technology and the selection of promising technology should be preceded, but there has been little research in this area. The purpose of this paper was to measure and evaluate the technology trends quantitatively. For this purpose, this study analyzed the technology trends and selected promising/declining technologies using topic modeling of papers and patent data. As a result of topic modeling, promising technologies include control and navigation, verification/validation, autonomous level, mission module, and application technology, and declining technologies include underwater communication and image processing technology. This study also identified new technology areas that were not included in the existing technology classification, e.g., technology related to research and development of USV, artificial intelligence, launch/recovery, and operation, such as cooperation with manned and unmanned systems. The technology trends and new technology areas identified through this study may be used to derive key technologies related to the development of the USV and establish appropriate R&D policies.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.2
• /
• pp.253-258
• /
• 2016

The $MnO_x-WO_3-TiO_2$ nanoscale powders were synthesized by sol-gel method in order to prevent the biological fouling on the ships and offshore structures. Powder characteristics and antifouling performance were investigated with respect to the crystalline, microstructure and surface property for application in self-polishing copolymer resins. The high antifouling activity of $TiO_2$-system biocide was attributed to its redox potential and soluble metal ions originating from tungsten oxides according to the improvements in the powder characteristics. Based on their physio-chemical characterizations, the specific surface areas of powders were about $90m^2/g$ and the grain size was in the region 100 ~ 150 nm. Powder characteristics and surface properties were improved by the addition of $WO_3$. Antifouling performance were analyzed according to their surface properties and static immersion tests to determine the effects of the $TiO_2$-system compounds. The surface of 2 wt. % added sample was clean for 5 month. This may be attributed to the ability of $MnO_x-WO_3-TiO_2$ powders to act as a promoter in antifouling agents.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.11a
• /
• pp.147-153
• /
• 2002

Due to the growth of population and industrial development at the coastal cities, there has been much increase in necessity to effective control of the wastes into the coastal water and river. The amount of disposal at those waters has been increased rapidly and it is necessary for us to track of it in order to keep the water clean. The investigation and research related to the water quality in this region have been conducted continuously but the systematic survey of the disposed wastes at the bottom was neglected and/or minor. In this study we surveyed the status of disposed waste distribution at the bottom coastal water and river from the scanned images. The intensity of sound received by the side scan sonar tow vehicle from the sea floor provides information as to the general distribution and characteristics of the superficial wastes. The port and starboard side scanned images produced from a transducer borne on a tow fish connected by tow cable to a tug boat have the area with width of 22m∼112m, and band of 44m∼224m. All data are displayed in real-time on a high-resolution color display (1280 ${\times}$ 1024 pixels) together with position information by DGPS. From the field measurement and analysis of the recorded images, we could draw the location and distribution of bottom disposals. Furthermore, we made a database system which might be fundamental for planning the waste reception and process control system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.3
• /
• pp.202-208
• /
• 2017

The recently developed marine engines for propulsion of ships have higher torsional exciting force than previous engines to improve the propulsion efficiency and to reduce specific fuel oil consumption. As a result, a viscous damper or viscous-spring damper is installed in front of marine engine to control the torsional vibration. In the case of viscous damper, it is supposed that there is no elastic connection in the silicon oil, which is filled between the damper housing and inertia ring. However, In reality, the silicon oil with high viscosity possesses torsional stiffness and has non-linear dynamic characteristics according to the operating temperature and frequency of the viscous damper. In this study, the damping characteristics of a viscous damper used to control the torsional vibration of the shafting system have been reviewed and the characteristics of torsional vibration of the shafting system equipped with a corresponding viscous damper have been examined. In addition, it is examined how to interpret the theoretically optimal dynamic characteristics of a viscous damper for this purpose, and the optimum design for the propulsion shafting system has been suggested considering the operating temperature and aging. when the torsional vibration of the shafting system is controlled by a viscous damper filled with highly viscous silicon oil.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.6-6
• /
• 2009

자동차 운반용 선박(PCTC) 건조 시, 자동차를 고정시키기 위해 약 5 만 여개의 Lashing Socket(6,700 Units PCTC 기준)이 소요되는데, 이때 사용되는 Lashing Socket 은 용도 및 형태에 따라 Hole Cup, Flush Cloverleaf Type Pot, Raised Cloverleaf Type Pot, D-Ring, Crinkle Bar 등으로 구분된다. 이와 같이 다양한 종류 중에서 Hole cup 타입이 전체 적용되는 Lashing Socket 의 약 80%에 이른다. 기존에 사용되고 있는 자동용접장치는 Hole Cup 이외에는 적용이 불가능하고, 자석을 이용하여 Hole Cup 의 상부에 위치시키는 방식이었기 때문에 경량화 및 다양한 종류 및 크기의 Lashing Socket 에 적용이 가능한 자동용접장비의 개발이 요구되었다. 본 연구에서는 두께가 다른 $\phi$140 Hole Cup 및 Flush Cloverleaf Type Pot, Raised Cloverleaf Type Pot 에 적용 가능하며, 분리형 용접캐리지와 Centering Template, Magnet Jig 로 구성된 연속 및 단속 용접이 가능한 자동용접장치를 연구 개발하였다. 이를 통해 종래 Hole Cup 전용 자동용접 캐리지의 문제점을 개선하여, 작업자가 Centering Template 과 Magnetic Jig 을 이용하여 캐리지를 Hole Cup 의 중앙에 위치시키기 용이하게 하였다. 이 같은 분리형 장치 구성을 통해 Hole Cup 중앙에 캐리지 고정 작업과 용접 작업을 분리함으로써 자동용접이 진행되는 도중에 여분의 Jig를 이용하여 다른 Hole Cup 에 용접 준비를 하여 연속적인 작업이 가능하도록 하였다. 본 연구는 종래의 Hole Cup 전용 자동용접 캐리지의 문제점을 개선한 분리형 용접 캐리지를 개발함으로써 아래와 같은 결과를 얻었다. 1. 용접 캐리지를 포함하여 각 부분별 분리를 통해 작업자가 1 회 이동 시 필요로 하는 중량을 감소시켜 장비의 이동 및 제어가 쉽다. 2. Magnetic Jig 를 Centering Template 에 결합하고, Template 의 Jig 를 Lashing Socket 에 결합함으로써 손쉽게 Lashing Socket 의 중심부를 찾을 수 있으므로 용접 캐리지의 정확한 센터 고정이 가능하다. 3. 엔코더에 의한 1 회전을 검출함으로써, 작업 종료 후, 어떤 위치에서나 작업 재개가 가능하며 원점 복귀 작업이 불필요하다. 또한 엔코더에 의한 거리 설정으로 용접 속도에 상관없이 동일한 거리만큼 오버랩 용접이 가능하다. 4 디지털 방식으로 용접 조건의 입력이 가능하고, 용접 조건을 D/B 화 함으로써 Control Panel 상에서의 자동 제어가 가능하다. 이를 통해 연속 용접 또는 단속 용접이 가능하므로 다양한 형태의 Lashing Socket 을 자동 용접할 수 있는 효과가 있다. 이상의 결과를 통해 본 장비가 Fig.2 의 3 가지 종류의 Lashing Socket 용접에 효과적인 장비임을 확인할 수 있었다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.20 no.1
• /
• pp.49-59
• /
• 1984

Optimizing investigation of characteristics of underwater welding by a gravity type arc welding process was experimentally carried out by using six types of domestic coated welding electrodes for welding of domestic marine structural steel plates (KR Grade A-1, SWS41A, SWS41B,) in order to develop the underwater welding techniques in practical use. Main results obtained are summarized as follows: 1. The absorption speed of the coating of domestic coated lime titania type welding-electrode became constant at about 60 minutes in water and it was about 0.18%/min during initial 8 minutes of absorption time. 2. Thus, the immediate welding electrode could be used in underwater welding for such a short time in comparison with the joint strength of in-atmosphere-and on-water-welding by dry-, wet-or immediate-welding-electrode. 3. By bead appearance and X-ray inspection, ilmenite, limetitania and high titanium oxide types of electrodes were found better for underwater-welding of 10 mm KR Grade A-1 steel plates, while proper welding angle, current and electrode diameter were 6$0^{\circ}C$, above 160A and 4mm respectively under 28cm/min of welding speed. 4. The weld metal tensile strength or proof stress of underwater-welded-joints has a quadratic relationship with the heat input, and the optimal heat input zone is about 13 to 15KJ/cm for 10mm SWS41A steel plates, resulting from consideration upon both joint efficiency of above-100% and recovery of impact strength and strain. Meanwhile, the optimal heat input zone resulting from tension-tension fatigue limit above the base metal's of SWS41A plates is 16 to 19KJ/cm. Reliability of all the empirical equations reveals 95% confidence level. 6. The microstructure of the underwater welds of SES41A welded in such a zone has no weld defects such as hydrogen brittleness with supreme high hardness, since the HAZ-bond boundary area adjacent to both surface and base metal has only Hv400 max with the microstructure of fine martensite, bainite, pearlite and small amount of ferrite.