• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.627-630
• /
• 2009

The combination of the marine use various multi sensor surveillance system technology with the development of servo motion control algorithm and gyro sensor in six freedom motion is implemented to analyze the movement response. The stabilization of the motion control is developed and Nano driving Precision Pan-Tilt/Gimbal system is obtained from the security positioning cameras with ultra high speed device is used to carry out the exact behavior of the device. The exact behavior will be used to make a essential equipment. Finally the development of the Nano Driving Multi Sensor, Nano of Surveillance System Driving Precision Pan-Tilt/Gimbal optimal design and production, 3-aix Gyro Sensor based with Servo Motion Control algorithm development, Image trace video software and hardware tracking the development is organized and discuss in details. The development of the equipment and the system integration are fully experimented and verified.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.6
• /
• pp.587-594
• /
• 2009

In the paper the effect of a stern-plate attached to a ship was taken into account. The relationship between the trim angle of a ship and the wave-resistance coefficient induced by the a stern-plate was studied using the potential flow analysis method. Numerical algorithm was described using the panel method and the vortex lattice method(VLM) to simulate the flow phenomena around a ship. The non-linearity of the free surface boundary conditions were considered using the iterative method and the IGE-GMRES(Incomplete Gaussian Elimination-The Generalized Minimal RESidual) algorithm was adopted to solve the linear equation at each iterative step. Numerical calculations were carried out to investigate the validity of the adopted algorithm using KCS(KRISO 3600 TEU Container) hull. Possible cases for attachment of the plate were checked. The results showed that the numerical algorithm could be physically appropriate.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.4
• /
• pp.498-503
• /
• 2019

Electric propulsion ships are gaining widespread interest in the marine industry owing to extreme air pollution concerns. Consequently, several studies are actively being conducted for improving the power quality. Various methods have been developed that incorporate passive filters, notch filters, and active filters for reducing the harmonic content in the input current of a conventional diode front end rectifier. Among such filters, the active front end (AFE) rectifier is considered as an excellent technology. In this paper, current control for an AFE rectifier employing space vector PWM (Pulse Width Modulation) is proposed. Conventional current control methods for the AFE rectifier, hysteresis, SPWM (Sinusoidal Pulse Width Modulation), and SVPWM (Space Vector Pulse Width Modulation) were simulated by employing the PSIM software tool for analysis and comparisons. The results corroborate that SVPWM has the simplest structure and provides the best performance.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.1
• /
• pp.7-13
• /
• 2021

In recent years, the importance of environmental regulations is increasing in the shipping industry, and the demands of the industry for this are rapidly increasing. Accordingly, the demand of ship owners is increasing as the shaft generator is a technology that responds to environmental regulations that can be applied to ships the fastest. The shaft generator is a device that can increase the fuel consumption rate of the main propulsion engine by installing an electric motor in the main propulsion engine and using it variably according to the load environment. It operates by the power of the motor at low speeds, and when a sudden load is required, the main propulsion engine and motor operate together, enabling efficient operation. In this paper, the diesel engine and shaft generator of a tug boat are modeled using MATLAB Simulink, and the fuel consumption rate is verified through simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.1
• /
• pp.19-25
• /
• 2003

The radio communications by SSB and VHF transceivers are still used very efficiently in coast stations. The SSB and VHF equipments are very important to transmit and receive informations in the sea and the land. The communication system by the conventional SSB and VHF transceivers between a coast station and a terminal is an one-to-one system. In this dissertation, however, the conventional one-to-one system is expanded to one-to-multiple systems. Then, frequencies can be used effectively for distress, urgency, safety traffic. In addition, one to multi-number systems can be used to interrupt. When the ICS equipments are set up to the VHF transceiver. It is possible to communicate with ship in far distance the communication range can be enlarged. The line switching system by the ICS is to be remote-controlled by ASK modulated PTT signals and audio signals. An ICS can change a connection between terminal and transceiver through a circuit switching system at any time. For this purpose, the author has researched and developed a ASK transmission system, ICS system, control algorithm, multiprocessor system, and monitoring system. As a conclusion, the developed line switching control systems and equipments can be used effectively for maritime communication, military communication, fishery communication, etc.

• The Magazine of the IEIE
• /
• v.28 no.7
• /
• pp.49-55
• /
• 2001

1970년대에 개발된 마이크로 프로세서는 제어기기 분야 및 소형 컴퓨터에서 주로 사용되어 오다가 1980년대에 이르러 RISC(Reduced Instruction Set Computer) 구조의 도입으로 중대형 컴퓨터에 이르기까지 광범위하게 사용되고 있다. 또한 반도체 기술의 급격한 발전으로 슈퍼스칼라 구조가 마이크로 프로세서에서도 적용되고 있으며 동작 속도도 수백 MHz에 이르고 있다. 마이크로 프로세서는 프로그램을 수행하기 위해서 프로그램과 데이터를 메모리로부터 읽어 와야 한다. 그런데 메모리 용량은 빠른 속도로 증가하고 있지만 동작 속도는 마이크로 프로세서의 동작 속도에 크게 미치지 못하고 있다. 1980년에 DRAM의 접근 속도는 250nsec이었으나 1998년에 RDRAM의 동작속도는 300MHz로 70여배 빨라졌다. 그러나 마이크로프로세서는 1980년에 8086의 동작 속도가 8MHz이던 것이 1998년에는 팬티엄-2가 500MHz에 이르고 있다. 더욱이 팬티엄-2는 슈퍼스칼라 구조이므로 이를 감안하면 1GHz 이상에 이르러 120여 배 빨라진 것을 알 수 있다. 이와 같은 메모리 속도와 마이크로 프로세서 속도 차이에 더하여, 메모리와 마이크로 프로세서를 인쇄 회로 기판에서 연결하는데 따른 물리적 특성은 변화하지 않으므로 데이터 전송 폭을 넓히는 것에는 한계가 있다. 따라서 향후 컴퓨터 성능 발달을 제한하는 주요 요소 중 하나는 마이크로 프로세서와 메모리 사이의 데이터 전송 폭이다. 프로그램과 데이터가 메모리에 저장되는 본 뉴먼 방식의 컴퓨터에서 데이터 전송 폭을 줄이기 위해서는 코드 밀도(Code Density)가 높은 컴퓨터 구조를 연구하는 것이 필요하다. 한편 마이크로 프로세서는 실장 제어용으로 거의 모든 전자 제품 및 자동화 기기에서 채용하고 있다. 특히 냉장고, 에어콘, 전축, TV, 세탁기 등 가전기기와 Fax, 복사기, 프린터 등 사무용기기와 자동차, 선박, 자동화기계 등 사무 및 산업용 기기와 PDA(휴대용 정보 기기), NC(Network Computer) 등 정보 기기 그리고 각종 오락기, 노래 반주지 등 정보 기기 등에서 사용하는 실장 제어용 마이크로 프로세서 시장은 매년 10% 이상씩 성장하고 있으며, 21세기 산업을 주도하는 핵심 기술로 자리 매김하고 있다. 이러한 실장 제어용 기기는 마이크로 프로세서와 메모리 및 입출력 자이가 하나의 반도체에 집적되는 경우가 많다. 그런데 반도체 가격은 반도체 크기에 따라 결정되며, 가장 넓은 면적을 차지하는 것은 메모리이다. 따라서 반도체 가격을 낮추기 위해서는 메모리 크기를 줄여야 하며, 이를 위해서 또한 코드 밀도가 높은 컴퓨터 구조에 대한 연구가 필요하다. 최근에는 322비트 RISC 명령어를 16비트 명령어로 축약한 구조가 연구되었다. ARM-7TDMI는 ARM-7의 16비트 축약 명령어 구조이며, TR4101은 MIPS-R3000의 16비트 축약 명령어 구조이다. 이들 16비트 축약 명령어 RISC는 종래 RISC와의 호환성을 위하여 2가지 모드로 동작하므로 구조가 복잡하고, 16비트 명령어에서는 8개의 레지스타만을 접근할 수 있으므로 성능이 크게 떨어지는 단점을 가진다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.263-268
• /
• 2000

In this paper, a new indirect feedback active noise control (ANC) scheme based on the fundamental frequency estimation is proposed for systems with a harmonic noise. When reference signals necessary for feedforward ANC configuration is difficult to obtain, the conventional ANC algorithms for multi-tonal noise do not measure the reference signals but generate them with the estimated frequencies. However, the beating phenomena, in which certain frequency components of the noise vanish intermittently, may make the adaptive frequency estimation difficult. The confusion in the estimated frequencies due to the beating phenomena makes the generated reference signals worthless. The proposed algorithm consists of two parts. The first part is a reference generator using the fundamental frequency estimation and the second one is the conventional feedforward control. We propose the fundamental frequency estimation algorithm using decision rules, which is insensitive to the beating phenomena. In addition, the proposed fundamental frequency estimation algorithm has good tracking capability and lower variance of frequency estimation error than that of the conventional cascade ANF method. We are also able to control all interested modes of the noise, even which cannot be estimated by the conventional frequency estimation method because of the poor SIN ratio. We verify the performance of the proposed ANC method through simulations for the measured cabin noise of a passenger ship and the measured time-varying engine booming noise of a passenger vehicle.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.481-495
• /
• 2020

After the resonator on the basis of the wave-filter theory was designed to control the waves with a specific frequency range surging into the harbor, the several case with the use of resonator have been reported in some part of sea, including the port of Long Beach, USA, and yacht harbor at Rome, Italy in order to control the long-period wave motion from the vessels. Recently, the utility and applicability of the resonator has been sufficiently verified in respect of the control of tsunami approximated as the solitary wave and/or the super long-period waves. However, the case with the application of tsunami in the real sea have not been reported yet. In this research, the respective case with the use of existing resonator at the port of Mukho and Imwon located in the eastern coast of South Korea were studied by using the numerical analysis through the COMCOT model adapting the reduction rate of 1983 Central East Sea tsunami and 1993 Hokkaido Southwest off tsunami. Consequently, the effectiveness of resonator against tsunami in the real sea was confirmed through the reduction rate of maximum 40~50% at the port of Mukho, and maximum 21% at the port of Imwom, respectively. In addition, it was concluded that it is necessary to study about the various case with application of different shape, arrangement, and size of resonator in order to design the optimal resonator considering the site condition.

• Korean Journal of Materials Research
• /
• v.27 no.8
• /
• pp.409-415
• /
• 2017

For enhanced cavitation erosion resistance of vessel propellers, an electroless Ni-P plating method was introduced to form a coating layer with high hardness on the surface of Cu alloy (CAC703C) used as vessel propeller material. An electroless Ni-P plating reaction generated by Fe atoms in the Cu alloy occurred, forming a uniform amorphous layer with P content of ~10 wt%. The amorphous layer transformed to (Ni3P+Ni) two phase structure after heat treatment. Cavitation erosion tests following the ASTM G-32 standard were carried out to relate the microstructural changes by heat treatment and the cavitation erosion resistance in distilled water and 3.5 wt% NaCl solutions. It was possible to obtain excellent cavitation erosion resistance through careful microstructural control of the coating layer, demonstrating that this electroless Ni-P plating process is a viable coating process for the enhancement of the cavitation erosion resistance of vessel propellers.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.3
• /
• pp.778-784
• /
• 2017

This paper proposes a sensorless speed control of a permanent magnet synchronous motor (PMSM) based on an adaptive sliding mode observer (SMO) for electric propulsion system of small ships. An adaptive observer gain is proposed based on the Lyapunov's stability criterion to reduce the chattering problem at any speed operation instead of the constant gain observer. Furthermore, a cascade low-pass filter with variable cut-off frequency is suggested to strengthen the filtering capability of the observer. The experimental results from a 1.5 kW PMSM drive are provided to verify the effectiveness of the proposed adaptive SMO. The result shows that the proposed method gives good speed control performances even when the PMSM operates at 0.5% from its rated speed value.