• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.110-111
• /
• 2019

본 논문은 DC 배전 전기 추진 시스템으로 건조된 10톤급 소형 어선을 운항하며 계측한 실험 결과를 제시한다. DC 배전 선박과 모의된 AC 배전 선박을 일반적인 10톤급 소형 어선의 운용 패턴에 따라 운항하였고, 각 경우의 연료소모량을 유량계로 측정하였다. DC 배전 시스템은 가변속으로 인한 엔진의 효율적인 운전과 전기설비 무게 감소로 인한 추진 부하 감소의 효과로 AC 배전 시스템에 비하여 연료사용량이 약 20% 가량 절감된다. 실험 결과, DC 배전 전기 추진 선박을 적용할 시 연간 약 18,500L (22.0%)의 연료가 절감되어 연료비가 매년 약 1400만원 가량 절약될 것으로 예상된다.

• Korean Journal of Computational Design and Engineering
• /
• v.6 no.3
• /
• pp.198-205
• /
• 2001

Under the concept of global economy, the enterprises are assigning design and production environments around the world in different areas. In shipbuilding companies, a serious problem of information exchange emerges as companies use traditional hardware and very distinct softwares appropriate to their field of expertise. To overcome the decreased productivity due to the interruption of information, the concept of simultaneous engineering and concurrent design becomes very significant. In this article, the concept of collaborative design based on internet environments is described. Especially, the core technologies to achieve collaborative design environments among shipbuilding companies, ship owners, ship classification societies, model basin, and consulting companies are adopted.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.6
• /
• pp.391-399
• /
• 2021

In order to investigate force and cavitation characteristics for the flat & twisted rudders in the Large Cavitation Tunnel (LCT), the rudder dynamometer was designed and manufactured. The measuring capacities of lift, drag and moment are ±1000 N, ±2000 N, and ±150 N-m, respectively. The present dynamometer uses the actuator with a harmonic drive to control the rudder angle without backlash. As the target ship is a military ship with twin shaft, each dynamometer was installed above the port & starboard rudders. After the installation of the model ship with all appendages, the model test composed of rudder force measurement and cavitation observation was conducted for the existing flat rudder & the designed twisted rudder. While the flat rudder showed the big difference of lift & moment between port & starboard, the twisted rudder presented a similar trend. The cavitation of the twisted rudder showed better characteristics than that of the flat rudder. Another set of model tests were conducted to investigate rudder performance by the change of the design propeller. There was little difference in rudder performance for the design propellers with slight geometric change. Through the model test, the characteristics of the flat & twisted rudders were grasped. On the basis of the present study, it is thought that the rudder with better performance would be developed.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.1
• /
• pp.100-110
• /
• 1994

레이다 신호는 대표적인 전자파 신호로서 주변환경에 따라 시간, 주파수, 공간 영역에서 고유한 신호특성을 가지고 있으며, 신호처리 기법도 다양하다. 본 논문에서는 먼저 레이다를 위한 전파 신호처리 의정의와 필요성을 언급한뒤, 레이다 신호환경 특성을 살펴보고 신호처리를 위한 신호의 시간 및 스펙트럼 특성에 대해 기술하였다. 그리고, 신호특성에 적합한 신호처리기의 구현을 위해 레이다 신호처리에 관 련된 주요 기법에 대해 개괄적으로 설명하였다. 레이다 신호처리 분야는 일반적으로 잘 알려진 음성이 나 영상신호처리 분야와 달리 고유한 알고리듬과 구조가 요구된다. 신호처리기법으로서 레이다 파형설 계, 해상도 모호성, 펄스압축, 클러터제거, 도플러처리, 일정오경보탐지, 클러터 지도, 표적군 형성/ 추출, 표적식별, 레이다영상기법, 적응배열처리 등에 관해 개괄적으로 설명하였다. 레이다 선호처리 기술은 "스마트"한 레이다를 위한 두뇌 역할을 하기때문에 그 필요성과 중요성이 증가하고 있다. 그러나, 고속, 대용량의 신호를 주어진 빔 주사시간동안에 실시간으로 처리하여 표적 정보를 추출해야 하기 때문에 아직도 상용 프로세서의 속도 한계내에서 알고리듬의 수행에 다소 제약을 받고 있으나, 최근 디지탈 신호처리 전용의 고속 칩의 출현으로 많은 발전을 가져오고 있다. 끝으로, 향후 레이다 신호처리 발전 추세와 응용분야에 대해 살펴보았다. 응용분야는 군수 및 민수용의 겸용 파급효과가 매우 크고, 군용의 대공탐색 및 조기경보, 전장감시뿐만 아니라 전투기 탑재용으로 필수적이며, 특히 민수용의 공 항, 항공기, 선박, 위성 등 매우 다양하다. 최근 발전추세에 따른 기술로서 다중모드 신호처리, 고집적 회로기술, 적응배열, 디지탈 빔형성, 적응성, 고분해능 및 방향성, 표적식별, 다차원 신호처리에 대해 언급 하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.6
• /
• pp.515-521
• /
• 2017

Large Cavitation Tunnel (LCT) of KRISO enables us to conduct cavitation tests of the propeller attached to a ship model. As the ship model tests are done at rather high Reynolds number of 107~108, flow measurement system such as pitot tube cannot be employed because of structural safety problems in its system and difficulties in installing it within the test section. Thus, KRISO has developed new 3-D LDV system used in large test section of LCT. There are several difficulties in using 3-D LDV, which did not allow efficient operation of it. The first trouble was the calibration using the conventional pin hole. To make the focus with same laser-beam waists at the wanted position, the high spatial resolution CCD is utilized in the calibration procedure for 3-D LDV. The off-axis configuration provides two velocity components in the horizontal plane and on-axis configuration gives third velocity component in the vertical plane. The horizontal velocity components are also obtained in the coincidence mode, which prevents any misleading results in the off-axis configuration. The nominal wake of Aframax tanker model is measured by the developed 3-D LDV system. The measured hull wake showed good agreement with that obtained by CFD calculation.

• Journal of Navigation and Port Research
• /
• v.26 no.5
• /
• pp.505-510
• /
• 2002

Bans on TBT based antifouling paints have been drafted since 1998 by meetings 42, 43, 45 and 46 for the MEPC (Marine Environmental Protection Committee) of the International Marine Organization, and decided finally at a Diplomatic Conference of IMO in October 2001. It was a key issue that there should be a global prohibition on the application of organo-tin compounds as biocides in Anti-fouling systems by Jan. 2003, and a complete prohibition on the presence of organo-tin compounds on ships by 1 Jan. 2008. This paper suggests a method to design International Anti-fouling system cretificate, Record of anti-fouling system, Endorsement of the Records, Declaration on Anti-fouling System, Port State Control and reform(legislative) associated a law.